424242
52
Zoom out
Zoom in
Previous page
1/87
Next page
50 Settings and Activity Reports
TX SETTINGS
RX SETTINGS
ACTIVITY REPORT Enable/disable automatic printing of the activity report.
AUTO PRINT When you set ON, your fax is set to print an activity report for
every 20 transactions (sending and receiving).
ON/OFF
TX/RX SEPARATE Divide the activity management report into sent and received
transactions.
ON/OFF
Name Description Settings
ECM TX Enable/disable error correction during transmission. ON/OFF
PAUSE TIME Set the length of the pause you insert into a dialing sequence. 1 to 15 seconds
AUTO REDIAL Determine whether the fax will redial a number if it fails to get
a response on the first attempt.
ON/OFF
REDIAL TIMES Set the number of retries. 1 to 10 times**
REDIAL INTERVAL Set the period of time between redialing attempts. 2 to 99 minutes
DIAL TONE DETECT* Set whether to send faxes after detecting the dial tone. This
function may not work correctly with some telephone lines.
ON/OFF
* Only available in some countries.
** The values may differ depending on the country/region of use.
Name Description Settings
ECM RX Enable/disable error correction during reception. ON/OFF
FAX/TEL AUTO SW This feature is used to answer calls, and if no fax tone is
detected, the fax rings to alert you of an incoming call.
RING START TIME Set the duration that the fax listens for a fax tone before
starting to ring.
0 to 20 seconds
TEL RING TIME Set the length of time the fax will ring to alert you of an
incoming call.
10 to 60 seconds*
DEFAULT ACTION Select the action taken after the TEL RING TIME expires. DISCONNECT/
RECEIVE
INCOMING RING Set the fax to ring when it receives a call. ON/OFF
RING COUNT Set the number of incoming rings before the fax answers. 2 to 30 times*
MAN/AUTO SWITCH Determine if the fax switches to document receive mode after
the fax rings for a specified time when the fax is in the manual
receive mode.
ON/OFF
RING TIME Set the amount of time the fax will ring before switching to
document receive mode.
1 to 60 seconds
REMOTE RX Enable/disable remote receiving. ON/OFF
REMOTE RX ID If you set REMOTE RX to ON, you can select the remote
receiving ID.
00 to 99
SAVE RX IMAGE Set whether to save images received. ON/OFF
OPTION SETTINGS Set whether the fax prints out received documents even
when the ink level is low. Faxes will be deleted from memory
after printing. If there is no ink left, the information contained
in the fax will be lost.
This setting will be retained even if the FINE cartridge is
replaced with a new cartridge.
ON/OFF
* The values may differ depending on the country/region of use.
Name Description Settings
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax jx 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax jx 500 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info