424035
113
Zoom out
Zoom in
Previous page
1/156
Next page
9-3
SETTINGS AND ACTIVITY REPORTS
9
Selecting a menu
USER SETTINGS
For details on accessing the settings below, see p. 9-2.
Name Description Settings
DATE & TIME
Set the date and time (24-hour clock) using the numeric
buttons.
UNIT TELEPHONE #
Enter your fax number using the numeric buttons.
UNIT NAME
This is the name that appears at the top of each fax page
you send. (see p. 2-8)
TX TERMINAL ID
This option sets the parameters for the identification
header that appears on every page you send.
ON
/OFF
TTI POSITION
Select the position of the TTI.
INSIDE IMAGE: Position the TTI inside the image area.
OUTSIDE IMAGE: Position the TTI outside the image
area.
INSIDE IMAGE/
OUTSIDE IMAGE
TELEPHONE # MARK
Select the icon for the fax number.
TEL: Set the telephone icon. FAX: Set the fax icon.
TEL/
FAX
SCAN CONTRAST
Set the density of the reproduction. Set DARKER for light
originals and LIGHTER for dark originals.
STANDARD
/
DARKER/LIGHTER
OFFHOOK ALARM
Enable/disable the off hook alarm. The alarm alerts you
that the handset is not seated properly in its cradle.
ON
/OFF
VOLUME CONTROL
Set the volume of the fax sounds.
CALLING VOLUME
Set the volume of the ring produced when the fax detects
a voice call during FAX/TEL switchover.
1/
2
/3
KEYPAD VOLUME
Set the volume of the keypad. 0 (off)/1/
2
/3
ALARM VOLUME
Set the volume of the error alarm sound. 0 (off)/1/
2
/3
LINE MONITOR VOL
Set the volume of the line monitor (sound during dialling).
If LINE MONITOR VOL is set to 0, you will not be able to
hear incoming messages as they are being recorded.
0 (off)/1/
2
/3
RX CALL LEVEL
Set the ring tone. STANDARD/
HIGH
TEL LINE TYPE
Set the dialling method the fax uses to match the type of
phone line you have.
TOUCH TONE/
ROTARY PULSE*
R-KEY SETTING
Set the type of PBX through which your fax is connected.
PSTN
/PBX
PSTN
Your fax is connected to an outside line.
PBX: ACCESS TYPE
Your fax is connected through a PBX.
You can set the PBX type to PREFIX, HOOKING or
EARTH CONNECTION**.
EARTH
CONNECTION
/
PREFIX/HOOKING
ACCESS NUMBER
If you select PREFIX, you can enter an outside line
number of up to 19 digits.
M-KEY SETTING
(UK only)
Enable/disable the M–key setting.
Set an access code and ID code for the UK Call, Global
Call, or Day Call Service of Cable and Wireless
Communications Limited. (see p. 2-21)
ON/
OFF
ACCESS CODE
Set an access code. 131P/
132
ID CODE
If you select 131P, set an ID code up to 20 digits.
(Factory settings are shown in bold type.)
* TOUCH TONE is the factory setting in the UK, Australia, New Zealand and Singapore.
** EARTH CONNECTION is not available in Australia, New Zealand, Hong Kong, Malaysia, or Singapore.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax eb10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax eb10 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info