809437
217
Zoom out
Zoom in
Previous page
1/254
Next page
217
Troubleshooting
Troubleshooting
If you have a problem with your camera in VIDEO mode, refer to this section. Consult your dealer or a Canon
Service Center if the problem persists.
Power source
Refer also to the Power-related problems section of the Troubleshooting Guide in the Advanced User Guide
(PHOTO edition).
The camera will not turn on or it turns off by itself.
- The battery pack is depleted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.
Shortly after turning it on, the camera turns off on its own.
-You are using a battery pack that is not compatible for use with this camera. Use a recommended battery pack
(A233).
The battery pack is depleted extremely quickly even at normal temperatures.
-Check the [
B
System Setup] status screen (A207) to check if the battery pack has reached the end of its battery
life. If so, buy a new battery pack.
Recording
The camera’s controls are not responsive/disabled.
-When key lock is activated, all buttons (or all buttons with the exception of some REC buttons) are locked and cannot
be operated. Press the LOCK button to disable key lock. You can change which controls are locked with the >
[
B
System Setup] > [Key Lock] setting.
Performing a recording operation (pressing a button/touching the onscreen button) will not start recording.
-The card is full or it already contains the maximum number of clips (999 clips). Delete some clips (A147) or save your
recordings and initialize the card (A36) to free some space. Alternatively, replace the card.
- The REC button was pressed while all the camera's controls were locked (key lock, A25). Unlock the controls or set
> [BSystem Setup] > [Key Lock] to [All Except REC Button].
- The REC button that was used may be disabled. Change the > [
B
System Setup] > [REC Button], [Assign.
Button 10 as REC]/[Assign. Button 13 as REC] and [Onscreen REC/STBY Button] settings to enable the use of the
desired button or onscreen button.
-Power supply to the camera has reached the level set for the power level warning. Check the power source.
- The camera cannot record while the [Color Correction] settings in the custom picture file (A136) are being adjusted
(except for the [Revision Level]/[Revision Phase] settings).
The point when the recording operation was performed does not match the beginning/end of the recording.
-There may be a slight interval between pressing the REC button (or touching the onscreen button) and the actual start/
end of recording. This is not a malfunction.
The lens will not function.
- Turn off the camera and correctly attach the lens again (A26).
-A lens that cannot be used with the camera is attached (A26).
-Check the content of the error message when it appears on the screen and proceed as suggested (A223).
-Use the > [
B
System Setup] > [Power Source Navigation] function to check the availability of lenses,
accessories, recording settings and power sources depending on the configuration of the camera.
The camera will not focus.
- The camera may not be able to focus on certain subjects using autofocus. Focus manually (A87).
- When [Continuous AF] is set to [Only Around Focus Point], start focusing manually until the AF frame changes from
yellow to white (automatic adjustment range).
-The lens is dirty. Clean the lens with a soft lens-cleaning cloth.
- The viewfinder is not adjusted. Use the dioptric adjustment lever to make the proper adjustment (A32).
217


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info