809437
131
Zoom out
Zoom in
Previous page
1/254
Next page
131
Custom Picture Settings
Look Files
You can register LUT files created with Blackmagic Design’s DaVinci Resolve as Look Files in the custom picture
file. Using a Look File allows you to adjust the video quality of the recorded video. These adjustments apply also
to proxy clips, photos, and screen/output terminals.
1Insert the SD card with the desired Look File (.cube format, located in the root directory of the SD
card) into the camera’s card slot 2.
2Select a custom picture file. (A129)
3Select > [
/
Custom Picture] > [Edit
/
File] > [Gamma/Color Space] > Desired option.
4Select > [
/
Custom Picture] > [Edit
/
File] > [Look File Setup] > [Register].
The Look Files in the SD card will be displayed.
5Select the desired Look File.
6Select the [Gamma/Color Space] setting to use after the Look File is applied.
7Select [OK] twice.
The selected Look File will be loaded and registered to the custom picture file.
The image quality adjustments set in the Look File will be applied, and will appear on the screen.
When disabling the image quality adjustments set in the Look File, select > [
/
Custom Picture] >
[Edit
/
File] > [Look File] > [Off].
NOTES
About Look files
- The camera supports LUT files (3D LUT/.cube format) in 17 grid or 33 grid format created with Blackmagic
Design’s DaVinci Resolve.
- LUT files with input ranges outside the 0 to 1 range in the header (“LUT_3D_INPUT_RANGE”) are not
supported.
- LUT files which include values outside of the 0 to 1 range in the data area are not supported.
- LUT files 2 MB and larger, as well as files with a name containing over 65 characters are not supported.
- Only the following characters can be used in the file name:
Numbers 0 to 9, upper/lower case letters a to z, underscore (_), hyphen (-), period (.) and a single byte
space.
If the correct input/output gamma curve and color space conversion are not selected, video will not be output
correctly.
A Look File cannot be used if the [Gamma/Color Space], [HLG Color] or [Over 100%] settings are changed
after registering it.
When the gamma curve component of the [Gamma/Color Space] setting in the custom picture is set to either
[BT.709 Normal], [BT.709 Standard] or [BT.709 Wide DR], super-white (video signal above 100%) and super-
black (video signal below 0%) levels of brightness will be clipped. When the video signal contains super-white
brightness levels, select > [/ Custom Picture] > [Edit / File] > [Other Functions] > [Over 100%] >
[Press] and then activate the Look File to apply it to a signal compressed to 100%.
When playing RAW clips, the Look File registered when the clip was recorded will only be applied to the
thumbnail and not the clip itself.
Deleting a Look File
You can delete Look Files registered in custom picture files.
1 Select a custom picture file (A129).
2 Select > [
/
Custom Picture] > [Edit
/
File] > [Look File Setup] > [Delete] > [OK].
The Look File will be deleted and the image quality adjustments will be reversed to the original settings of the
selected custom picture file.
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info