809437
111
Zoom out
Zoom in
Previous page
1/254
Next page
111
Video Scopes
Video Scopes
The camera can display a simplified waveform monitor or a vectorscope to check your recordings. The selected
video scope is displayed on the screen and can be output to other monitoring devices as well.
Displaying a Video Scope
Choose between a waveform monitor or a vectorscope. You can also change opacity, position and waveform
monitor size settings.
1Select > [
A
Assistance Functions] > [WFM Function] > [Waveform Monitor] or
[Vectorscope].
2Select > [
A
Assistance Functions] > One of the [WFM:] settings > [On].
By default, the video scope will appear on the right of the screen. Using the > [
A
Assistance
Functions] > [Waveform Settings] or [Vectorscope Settings] > [Position] settings, you can select where to
display it (left or right side).
You can also use direct touch control (A58) to turn on/off the display of video scopes, or to change their
position.
3 If needed, select > [
A
Assistance Functions] > [WFM Opacity Level] > Desired option.
The smaller the percentage the more transparent the onscreen displays.
NOTES
NOTES
The waveform monitor will not be affected even if a view assistance is applied to the image, the range is
changed or anamorphic desqueeze is used on the selected video output or screen.
The video scopes will also be displayed while adjusting a custom picture file's image settings (A130).
Changing the Waveform Monitor Settings
1Select > [
A
Assistance Functions] > [Waveform Settings] > [Type] > Desired option.
If you selected an option other than [Select Line], skip to step 4.
2Select > [
A
Assistance Functions] > [Waveform Settings] > [Select Line].
3 Enter the Y coordinate of the red horizontal line to display using the data entry screen (A 25).
The available range of lines that can be selected depends on the vertical component of the resolution used.
For 4320: 0 to 4318 (in 2-line increments)
For 2160: 0 to 2158 (in 2-line increments)
For 1080: 0 to 1079 (in 1-line increments)
For 720: 0 to 719 (in 1-line increments)
4Select > [
A
Assistance Functions] > [Waveform Settings] > [Vertical Scale for HDR] >
Desired option.
Select the Y axis (luminance) scale used when displaying the waveform monitor of an HDR image.
5Select > [
A
Assistance Functions] > [Waveform Settings] > [Gain] > [1x] or [2x].
If you selected [1x], the rest of the procedure is not necessary.
6Select > [
A
Assistance Functions] > [Waveform Settings] > [Y Position] > Desired option.
The display range of the waveform monitor’s Y axis will be reduced by half. Select the minimum luminance
value (in %) shown on the Y axis.
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info