33
Handling Precautions
Camera Care
z
This camera is a precision instrument. Do not drop it or subject it to
physical shock.
z
The camera is not waterproof and cannot be used underwater. If the
camera gets wet, contact a Canon Service Center immediately. Wipe o
any water droplets with a clean, dry cloth, and if the camera is exposed
to salty air, wipe it o with a clean, well-wrung wet cloth.
z
Using the camera in a location with large amounts of dirt or dust may
cause a malfunction.
z
Cleaning the camera after use is recommended. Allowing dirt, dust,
water, or salt to remain on the camera may cause a malfunction.
z
Never leave the camera near anything having a strong magnetic eld
such as a magnet or electric motor. Also, avoid using or leaving the
camera near anything emitting strong radio waves, such as a large
antenna. Strong magnetic elds can cause camera malfunction or
destroy image data.
z
Do not leave the camera in excessive heat, such as in a car in direct
sunlight. High temperatures can cause the camera to malfunction.
z
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
z
Do not block the built-in ash or shutter curtain operations with your
nger or other objects. Doing so may cause a malfunction.
z
Use a commercially available blower brush to remove dust from the
lens or other parts. Do not use cleaners that contain organic solvents to
clean the camera body or lens. For stubborn dirt, take the camera to the
nearest Canon Service Center.
z
Do not touch the camera’s electrical contacts with your ngers. This is
to prevent the contacts from corroding. Corroded contacts can cause
camera malfunction.
z
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, rst put the camera in a sealed plastic bag and let it adjust
to the warmer temperature before taking it out of the bag.
