82
Autoexposure Bracketing
When using autoexposure bracketing, the camera automatically changes the exposure level
within the set range (up to ±2 stops in 1/2-stop increments) for three successive frames. This is
called AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selected
drive mode (→67) in the following order: correct exposure, underexposure, and overexposure.
1
From the menu, select [AEB].
● Press the 〈MENU〉 button.
● Turn the 〈〉dial to select [AEB], then
press the 〈〉button.
2
Set the AEB level.
● Turn the 〈〉dial to set the AEB level you
want, then press the 〈〉button.
● The AEB setting is entered, and the display
returns to the Menu.
● Press the 〈MENU〉 button to clear the
screen and exit the menu.
3
Take the picture.
● When using continuous shooting, press
and hold the shutter button down fully to
take all three bracketed shots continuously,
and then stop automatically.
●
When using AEB with the self-timer, the
camera takes the three bracketed shots in
succession after the 10-second timer delay.
Canceling AEB
● Follow steps 1 and 2 to set the AEB level to
〈〉.
● AEB will be automatically canceled when
the Main Switch is set to [OFF], the lens is
changed, the flash completes charging,
the Auto power off time is reached, or the
〈MENU〉 button or the 〈〉button is
pressed.
:Correct exposure
:Underexposure
:Overexposure
Correct exposure (0) Underexposure (-1.0) Overexposure (+1.0)
