683260
183
Zoom out
Zoom in
Previous page
1/255
Next page
183
IP Streaming
Enter the port number using the keyboard screen (A 37).
Setup screen only: Press [RESET] to reset the port number to [5000].
Using the default port is recommended.
Options
[UDP]: This protocol prioritizes transfer speeds but does not guarantee the reliability/integrity of the
data. Lost or delayed IP packets are ignored.
[RTP]: Standard protocol for video/audio broadcasts over the Internet. Lost or delayed IP packets are
ignored.
[RTP+FEC]: This setting uses the RTP protocol and adds a layer of FEC error correction so the receiving
side* can recover lost or delayed IP packets. This combination is more common for broadcasts
over Wi-Fi networks.
[RTSP+RTP]: This setting uses the RTSP (real time streaming) protocol to control the streaming server
(camera) in real time and the RTP protocol for the broadcast over IP. With the RTSP protocol,
the receiver can control when to start and stop the broadcast.
* A decoder compatible with FEC error correction is required.
FEC Error Correction Settings
From the same IP streaming [Options] submenu (setup screen) or [IP Streaming] submenu (monitoring menu) as
the main procedure (A 182).
1 Select [FEC Port No.] and then press SET.
Enter the port number using the keyboard screen (A 37).
Setup screen only: Press [RESET] to reset the port number to [5002].
2 Select the FEC interval to be used.
•[FEC Interval] > Desired value > Press SET
RTSP Settings
From the same IP streaming [Options] submenu (setup screen) or [IP Streaming] submenu (monitoring menu) as
the main procedure (A 182).
1 Change the default user name for the RTSP function.
Setup screen: [RTSP: User Name] > [EDIT]
Monitoring menu: [RTSP: User Name] > [Input] > Press SET
Enter the desired text using the keyboard screen (A 37).
2 Change the default password in the same way.
Setup screen: Select [RTSP: Password] and press SET.
Monitoring menu: [RTSP: Password] > [Input] > Press SET
Streaming Video over IP
1 Connect the decoder to the network and complete any necessary configurations on the receiving
side so the decoder is ready to receive video over IP.
For details refer to the instruction manual of the decoder device or software you will use.
2 Configure the network connection settings.
Use an Ethernet network (A 168) or a Wi-Fi network in Infrastructure mode (A 165).
183


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C700 FF PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C700 FF PL in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C700 FF PL

Canon EOS C700 FF PL User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info