683260

Canon EOS C700 FF PL Manual

75
Zoom out
Zoom in
Previous page
1/255
Next page
75
Shutter Speed
Changing the Shutter Speed Mode and Value
1 Open the shutter speed [Mode] submenu.
HOME screen: [SHUTTER] > [OPTIONS] > [Mode]
Monitoring menu: [Camera Setup] (v) > [Shutter] > [Mode]
2 Select the desired mode and then press SET.
• If you selected [Speed], continue the procedure to select the increment scale to use when adjusting the
shutter speed; otherwise, skip to step 5.
3 From the same submenu select [Shutter Increment].
4 Select [1/3 stop] or [1/4 stop] and then press SET.
5 HOME screen: Press the BACK button.
Monitoring menu: Press the EVF button twice to close the menu.
• The current shutter speed (or angle value or clear scan frequency) appears on the control display marked
with an orange selection frame and also at the top of the monitoring screen.
6 Set the desired shutter speed.
Camera menu: Turn the SELECT dial to select the desired value and then press SET.
Monitoring menu: Set the shutter speed value using the direct setting mode (A 73).
• The selected shutter speed value appears on the HOME screen and at the top of the monitoring screen.
NOTES
NOTES
•
Z[qr
When recording under artificial light sources such as fluorescent, mercury
or halogen lamps, the screen may flicker depending on the shutter speed. You may be able to avoid flicker by
setting the shutter speed mode to [Speed] and the shutter speed to a value matching the frequency of the
local electrical system: 1/25, 3/100, 1/50 or 1/100 for 50 Hz systems; 1/30, 1/40, 1/60 or 1/120 for 60 Hz
systems. You can also set an angle value corresponding to the shutter speeds mentioned above.
• Closing down the aperture when recording under bright conditions may cause the picture to appear soft or out
of focus. To avoid the loss of sharpness due to diffraction, use a faster shutter speed, a denser ND filter
(A 78) or open up the aperture.
•
Z[qr
When the frame rate is set to 59.94i, 59.94P, 50.00i or 50.00P, if the
shutter speed mode is set to [Off] and slow & fast motion is not activated, you can use the [Camera
Setup] > [Flash Band Corr.] setting to have the camera detect partial flash banding on consecutive frames
and correct this to minimize the number of unusable frames. The flash band correction will be deactivated in
the following cases.
- When the frame rate, resolution/color sampling or shutter speed mode is changed.
- When slow & fast motion is activated.
- When the camera is turned off or the PLAY button is pressed (switching to playback mode).
• When the shutter speed mode is set to [Slow], bright red, green or blue dots may appear on the monitoring
screen. In such case, use a faster shutter speed or select a lower ISO speed or gain value (A 76).
• When using slow shutter speeds, if a very bright subject moves in the image or the brightness increases
suddenly due to a flash or other strong light, some color may appear in the brightest areas of the image.
Increasing the ISO speed/gain value may solve this.
• When an optional RC-V100 Remote Controller is connected to the camera, you can change the shutter speed
mode with the remote controller’s SHUTTER SELECT button and the shutter speed value with the remote
controller’s SHUTTER
Í
/
Î
buttons.
Using Slow Shutter Mode
When recording in dark surroundings, you can obtain a brighter picture by using the slow shutter mode. You
can also use this mode when you wish to add certain effects to your recordings, such as blurring the
background during panning shots or recording a moving subject with an afterimage trail.
• Image quality may not be as good as when using faster shutter speeds in brighter surroundings.
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C700 FF PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C700 FF PL in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C700 FF PL

Canon EOS C700 FF PL User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info