683260
33
Zoom out
Zoom in
Previous page
1/255
Next page
33
Using the Menus
4 Turn the SELECT dial to select the desired setting option and then press SET.
Depending on the menu item, additional selections may be necessary.
5 Press the HOME button to close the menu and return to the HOME screen.
Selecting an Option from the Monitoring Menu
The monitoring menu appears on the screen of external monitors connected to one of the camera’s MON.
terminals or to the HDMI OUT terminal and on the optional EVF-V70 OLED Electronic Viewfinder connected to
the camera’s VIDEO terminal. The monitoring menu contains almost all of the camera’s settings and can be
operated using the optional viewfinder or an optional RC-V100 Remote Controller connected to the camera
(A 123). For simplicity’s sake, the instructions throughout this manual will assume the use of the optional
viewfinder.
EVF button: Open the monitoring menu. On the RC-V100, press the MENU button instead.
BACK button: Return to the previous menu level without changing the setting. Pressing the button when one of
the icon tabs is highlighted in orange will close the monitoring menu. On the RC-V100, press the
CANCEL button instead.
SELECT dial: Turn to move the orange selection frame between menu settings/options.
Joystick: Push the joystick to move the orange selection frame between menu settings/options. On the
RC-V100, press the Up/Down/Left/Right buttons instead. Press the joystick itself to confirm the
selected menu setting/option.
SET button: Confirm the selected menu setting/option. (In the manual, “Press SET” includes also pressing
the joystick.)
Following is a step-by-step explanation of how to change a setting with the monitoring menu. In the manual,
such instructions will be abbreviated and will omit the closing of the menu. For example, the instruction below
stands for the procedure following it.
[System Setup] (
B
) > [Language
H
] > Desired language
1 On the optional viewfinder, press the EVF button. On an optional RC-V100 Remote Controller, press
the MENU button.
The monitoring menu appears on the screen.
If you used the EVF button, the [EVF-V70] submenu will appear on the optional viewfinder’s screen with the
[Brightness] setting selected. To change other settings, press the BACK button twice to return to the
monitoring menu’s top level (with one of the icon tabs highlighted in orange).
2 Push the joystick up/down or turn the SELECT dial to select the desired submenu (in the
example highlight the
B
tab corresponding to [System Setup]).
3 Push the joystick right or press SET.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C700 FF PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C700 FF PL in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C700 FF PL

Canon EOS C700 FF PL User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info