543073
190
Zoom out
Zoom in
Previous page
1/212
Next page
Troubleshooting
190
Cannot record on the SD card.
- Initialize the SD card (A 45) when you use it with the camera for the first time.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
- The SD card is full. Delete some photos (A 164) to free some space or replace the SD card.
- The folder and file numbers have reached their maximum value. Set the [Other Functions] > [Photo Numbering]
setting to [Reset] and insert a new SD card.
Recording to and playing back from a CF card is slow.
- This may occur as video is recorded/deleted over time. Save your clips (A 153) and initialize the CF card (A 45).
Recording to and playing back from an SD card is slow.
- This may occur as photos are recorded/deleted over time. Save your photos and initialize the SD card (A 45).
Connections with External Devices
Video is not recorded on an external recorder.
- Make sure the camera is connected to the external recorder correctly (A 41).
- Check the external recorder’s instruction manual to make sure that the external recorder is set to receive the signal
being output by the camera.
Video noise appears on a nearby TV screen.
- When using the camera in a room where a TV is located, keep a distance between the compact power adapter and the
power or antenna cables of the TV.
Playback looks fine on the camera but there is no image on the external monitor.
- The camera is not connected correctly to the external monitor. Make sure you are using the correct connection
(A 144).
- The video input on the external monitor is not set to the video terminal to which you connected the camera. Select the
correct video input.
The camera is connected using a commercially available HDMI cable, but there is no picture or sound from the
external monitor.
- Disconnect the HDMI cable and then restore the connection or turn the camera off and then on again.
List of Messages
Refer to this section if a message appears on the screen. The messages in this section appear in alphabetical
order. For error messages related to the optional WFT-E6 Wireless File Transmitter refer to the
Troublesho oting
section of the ‘WFT-E6 Wireless File Transmitter - Guide for Canon Camcorders’ (A 34).
Accessing CF A/CF B Do not remove
- You opened the CF card slot cover while the camera was accessing the CF card. Close the CF card slot cover.
Camera Q Lens communication error. Clean the lens’s contacts and reattach the lens.
- The camera cannot communicate with the lens. Remove the lens while making sure that dust does not accumulate on
the lens or enter the camera. Then, wipe the lens mount and lens contacts with a soft cloth.
Cannot acquire battery information
- Battery information can be displayed only for batteries bearing the Intelligent System mark.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that does not bear the Intelligent System mark.
- If you are using a battery pack that bears the Intelligent System mark, there may be a problem with the camera or
battery pack. Consult a Canon Service Center.
Cannot play back
- The file control information is corrupted or there was a decoder error. Turn off the camera and back on again. If this
does not solve the problem, consult a Canon Service Center.
Corrupted file control information cannot be recovered. CF cards or clips with corrupt file control information cannot
be read by the supplied Canon XF Utility or plugins.
COPY
190


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C500PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C500PL in the language / languages: English as an attachment in your email.

The manual is 8,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C500PL

Canon EOS C500PL User Manual - German - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info