543070
35
Zoom out
Zoom in
Previous page
1/200
Next page
35
Preparing the Camcorder
- The level of correction will be lower the higher the ISO speed/gain setting used.
- No correction will be applied when correction data is not available for the lens attached.
- When using EF-S lenses, peripheral illumination fall-off may be more pronounced.
- When using non-Canon lenses, peripheral illumination will not be corrected. Even if the [~ Camera Setup]
> [Periph. Illum. Corr.] setting is available (not grayed out), it is recommended to set it to [Off].
# Updating the Firmware of an EF Lens
You can update the lens firmware of the EF lens attached to the camcorder. For details about firmware updates
for EF lenses, visit your local Canon Web site.
1 Download the lens firmware update file from the Canon Web site and
save it on an SD card. Insert the SD card containing the lens firmware
update into the SD card slot.
2 Attach to the camcorder the lens you wish to update and open the
[Lens Firmware] submenu.
[w Other Functions] > [Lens Firmware]
The current lens firmware version will appear on the screen.
If the [Lens Firmware] submenu is grayed out, the attached lens may not support firmware updates or the
SD card used may not contain a valid lens firmware file. Check the lens and SD card and repeat the
procedure from the beginning.
3 Select [OK] and then press SET.
4 Select the lens firmware file (file extension .LFU) and then press SET.
5 Select [OK] and then press SET.
The lens firmware will be updated. Once in progress, the lens firmware update cannot be canceled.
6 When the confirmation message appears, press SET.
IMPORTANT
Be sure to observe the following precautions while the lens firmware is being updated.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the lens.
- Do not operate any buttons or controls on the camcorder.
- Do not open the SD card compartment cover and do not remove the SD card.
NOTES
The lens firmware cannot be updated while pre-recording is activated.
We recommend that you power the camcorder from a household power outlet using the compact power
adapter or use a sufficiently charged battery pack.
When using an optional EF Extender, remove the Extender before performing the procedure.
Operating modes:
[w Other Functions]
[Lens Firmware]
COPY
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C300 in the language / languages: English as an attachment in your email.

The manual is 8,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C300

Canon EOS C300 User Manual - German - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info