615744
9
Zoom out
Zoom in
Previous page
1/37
Next page
9
When the camera is set to mode, connect a Wi-Fi enabled device using a Camera
Access Point connection. Initially, basic default network settings (SSID, password, etc.) are
saved in the camera and you can use these settings to immediately connect a device to the
camera.
If you prefer to use different settings, follow the procedure below.
1
Set the camera to mode and open
the [Connection Settings] submenu.
[w System Setup] > [Network Settings] >
[Connection Settings]
The current Camera Access Point connection
settings will be displayed on the screen. To change
the settings, press SET. To keep the current
settings, press the CANCEL button.
2
To change the [SSID] (network name),
select [Input] and then press SET.
Enter the SSID (network name) the camera will
use as a Wi-Fi access point using the keyboard
screen (A 10).
The network name is needed to connect the Wi-Fi
enabled device to the camera. If necessary, write it
down.
3
Select the wireless connection mode
(5 GHz band or 2.4 GHz band) and then
press SET.
4
Select the channel and then press SET.
Available channels will differ depending on the
wireless connection mode selected in the previous
step.
5
Select the encryption method and then
press SET.
If you selected [Open/No encryption], continue
with the procedure to configure the IP address
assignment (A 16). If you selected [WPA2-PSK/
AES], continue the procedure to set the password.
Camera Access Point Connection
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C300 Mark II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C300 Mark II in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C300 Mark II

Canon EOS C300 Mark II Quick start guide - English - 42 pages

Canon EOS C300 Mark II User Manual - English - 223 pages

Canon EOS C300 Mark II Quick start guide - German, French, Italian, Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info