615744
166
Zoom out
Zoom in
Previous page
1/223
Next page
Connecting to an External Monitor or Recorder
166
Using the HDMI OUT Terminal
The HDMI
TM
OUT terminal also offers a digital connection and outputs
both a video and audio signal. The video output signal depends on the
MON. terminal’s video output setting. You can output also the camera’s
time code signal and onscreen displays, or change the video output to
B&W mode. The audio output signal will be 2-channel linear PCM audio
(16-bit*, 48 kHz sampling). You can select which audio channels to
output (A 169).
* Regardless of the [¡ Audio Setup] > [Audio Input] > [Audio Bit Depth] setting
(A 96).
In mode, no settings need to be changed but the output signal will
depend on the [¢ Picture/Terminals Setup] > [REC OUT/MON.
Term inal] > [Output] setting (A 162). In mode, perform the
following procedure to activate the HDMI OUT terminal.
1 Open the [Select Monitoring Devices] submenu.
[¢ Picture/Terminals Setup] > [Select Monitoring Devices]
2 Select an option that includes [HDMI] and then press SET.
If necessary, continue the procedure to activate the output of the time code signal from the HDMI OUT
terminal. Otherwise, the rest of the procedure is not necessary.
3 Open the [HDMI Time Code] submenu.
[3 Recording/Media Setup] > [HDMI Time Code]
4 Select [On] and then press SET.
NOTES
In the following cases, the HDMI OUT terminal’s output will switch automatically to HD or SD depending on the
capability of the external monitor.
- In mode, when [3 Recording/Media Setup] > [REC OUT 4K RAW Mode] is set to a setting other
than [4K RAW] and [¢ Picture/Terminals Setup] > [MON. Terminal] > [Output] is set to [Off].
-In mode, when [¢ Picture/Terminals Setup] > [REC OUT/MON. Terminal] > [Output] is set to [Off].
SD output is not available when the frame rate is set to 24.00P.
The HDMI OUT terminal is for output only. Do not connect the camera to another device’s output terminal
using the HDMI OUT terminal as this will cause a malfunction.
Correct operation cannot be guaranteed when connecting the camera to DVI monitors.
Video may not be output correctly depending on the monitor. In such case, use another terminal.
You can set both [3 Recording/Media Setup] > [Rec Command] and [HDMI Time Code] to [On] to use the
camera’s START/STOP button to control also the recording operation of an external recorder connected to the
HDMI OUT terminal. The camera's time code signal will be output as well.
The time code will not be output from the HDMI OUT terminal during SD output or in mode.
Operating modes:
[¢ Picture/Terminals Setup]
[Select Monitoring Devices]
[LCD+VF]
[3 Recording/Media Setup]
[HDMI Time Code]
[Off]
166


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C300 Mark II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C300 Mark II in the language / languages: English as an attachment in your email.

The manual is 13,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C300 Mark II

Canon EOS C300 Mark II Quick start guide - English - 42 pages

Canon EOS C300 Mark II Additional guide - English - 37 pages

Canon EOS C300 Mark II Quick start guide - German, French, Italian, Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info