683262
210
Zoom out
Zoom in
Previous page
1/236
Next page
Troubleshooting
210
The peaking/B&W image/magnification/zebra pattern/waveform monitor/onscreen markers do not appear on the
viewfinder or in the video from the VIDEO terminal.
- Check that that display of the desired assistance function is enabled for the desired output device or terminal.
Magnification/waveform monitor/onscreen markers do not appear in the video from the SDI terminal.
- Check that that display of the desired assistance function is enabled for the SDI terminal.
Magnification/onscreen markers do not appear in the video from the HDMI terminal.
- Check that that display of the desired assistance function is enabled for the HDMI terminal.
Network Functions
Check This First
Cannot connect with an access point.
- There are other devices in the vicinity interfering with the wireless signal. Remove the camera grip and then set up the
network-related settings again. If this does not solve the problem, refer to Precautions Regarding Wi-Fi Networks
(A 211).
- Password information is not saved with the camera settings. When you load onto the camera settings from an SD
card, all the passwords in the network-related settings are reset. Set up the network-related settings as necessary
(A 162).
- Check that the settings on the network device the camera is trying to connect with are correct.
Cannot establish a Camera Access Point connection with a network device.
- There are other devices in the vicinity interfering with the wireless signal. Remove the camera grip and then set up the
network-related settings again. If this does not solve the problem, refer to Precautions Regarding Wi-Fi Networks
(A 211).
- When you reset all the camera settings, all network settings are lost as well. Set up the Camera Access Point settings
again (A 163).
Cannot connect with a wired (Ethernet) network.
- Use a category 5e or better shielded twisted pair (STP) Ethernet cable.
- Try replacing the Ethernet cable.
- When you reset all the camera settings, all network settings are lost as well. Set up the network settings again
(A 162).
- Check that the network device to which the camera is connected is on and functioning properly. To use 1000BASE-T
connection speeds, make sure to use network devices compatible with Gigabit Ethernet (1000BASE-T).
The Browser Remote application will not start on the Web browser.
- Make sure Browser Remote is activated (A 171).
- The URL entered into the Web browser’s address bar is incorrect. Be sure to use the URL exactly as it appears in the
[Network 4/5] status screen (A 204).
The Browser Remote screen is not displayed correctly on the Web browser.
- The device, operating system or Web browser used may not be supported. For the latest information about supported
systems, visit your local Canon Web site.
- Enable JavaScript and cookies in your Web browser’s settings. For details, refer to the help modules or online
documentation of the Web browser used.
- Delete the cache and cookies for Browser Remote's URL in your Web browser and restart Browser Remote.
Are the access point (wireless router), camera, computer or other network devices all turned on?
Is the network working and correctly configured?
Are all network devices correctly connected to the same network as the camera?
Are there any obstructions between the camera and the access point or between the network device used
and the access point?
210


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C200B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C200B in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C200B

Canon EOS C200B User Manual - German - 246 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info