683262

Canon EOS C200B Manual

111
Zoom out
Zoom in
Previous page
1/236
Next page
111
Recording GPS Information (Geotagging)
Recording GPS Information (Geotagging)
When the optional GP-E2 GPS Receiver is connected to the camera’s USB terminal, the camera will
automatically record the GPS information (longitude, latitude and altitude) to clips and photos you record. Later,
the GPS information can be used to organize and search clips using Canon XF Utility (A 158). In mode,
you can check if a clip contains GPS information on the [Clip Info] screen (A 145).
For details about attaching and configuring the receiver, refer to the GP-E2’s instruction manual.
Connecting the GPS Receiver
Turn off the camera and the receiver. Connect the receiver to the camera’s USB terminal using the USB cable*.
While recording, place the receiver in the carrying case* and attach it to the camera’s grip belt or carry it on your
person. For details about connecting and using the receiver, refer to the GP-E2 Instruction Manual.
* Supplied with the optional GP-E2 GPS Receiver.
IMPORTANT
• In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver in accordance
with local laws and regulations of the country/region where the receiver is used. Be particularly careful when
traveling outside of your home country.
• Be careful about using the GPS receiver in places where the use of electronic devices is restricted.
• The recorded GPS information may contain data that can lead others to locate or identify you. Be careful when
sharing geotagged recordings with others or when uploading them to the Web.
• Do not leave the GPS receiver near strong electromagnetic fields such as near powerful magnets and motors.
NOTES
NOTES
• On the [GPS Information Display] status screen (A 205), you can check the current GPS information and
satellite signal strength.
• You can use the [
¢
% Monitoring Setup] > [Displayed Units] setting to change the units shown on the
screen between meters and feet.
• GPS signal reception may take some time after replacing the battery pack or when first turning on the camera.
• Do not place the unit cable or cable connected to the SDI or HDMI OUT terminal near a GPS receiver as doing
so may interfere with the GPS information.
• The GPS information recorded with clips corresponds to the location at the start of the recording.
USB terminal
Adjusting the Date/Time Automatically According to GPS Position
You can set > [
B
% System Setup] > [GPS Auto Time] to [On], to have the camera automatically
adjust its date and time settings according to the information received from the GPS signal. The date and time
will be updated automatically the first time a correct GPS signal is acquired after turning on the camera.
• When > [
B
% System Setup] > [GPS Auto Time] is set to [On], the > [
B
! System
Setup] > [Time Zone] and [Date/Time] submenus will not be available.
… 111 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C200B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C200B in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C200B

Canon EOS C200B User Manual - German - 246 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info