683262

Canon EOS C200B Manual

102
Zoom out
Zoom in
Previous page
1/236
Next page
Recording Audio
102
Audio Level Adjustment for CH3 or CH4
To adjust audio levels for CH3 and CH4, set the recording format to RAW or XF-AVC, or set it to MP4 and then
set > [
3
" Recording/Media Setup] >
[Audio Format (MP4)] to [LPCM 16 bit 4CH] in advance.
1 Open the [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/CH4] submenu.
> [
¡
" Audio Setup] > [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/
CH4]
2 Select [Automatic] or [Manual] and then press the joystick.
• If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Manual], continue the
procedure to set the audio recording level.
3 Open the [CH3 Level], [CH4 Level] or [CH3/CH4 Level] submenu.
> [
¡
" Audio Setup] > [CH3 Level], [CH4 Level] or [CH3/CH4 Level]
4 Push the joystick up/down to set the audio recording level and then press the joystick.
• For reference, 0 corresponds to –∞, 50 corresponds to 0 dB, and 100 corresponds to +18 dB.
• As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right
of the –18 dB mark (one mark right of the –20 dB mark) only occasionally.
NOTES
NOTES
• If at least one of the channels is set to the INPUT terminals, an analog audio source and manual audio level
adjustment, you can activate the audio limiter to prevent audio distortions. When activated, the audio limiter
will limit the amplitude of audio input signals when they start to distort. Use the > [
¡
# Audio
Setup] > [INPUT 1&2 Limiter] setting.
• We recommend using headphones when adjusting the audio level. If the input level is too high, audio may
become distorted even if the audio level indicator shows an appropriate level.
• If you set an assignable button to [Audio Level Indicator] (A 125), you can press the button to turn the
onscreen audio level indicator on and off.
• The audio recording level of the monaural microphone is set to automatic and cannot be changed.
Advanced Audio Input Settings
Adjusting the Microphone’s Sensitivity (INPUT Terminals)
When the ANALOG switch for INPUT 1 or INPUT 2 is set to MIC or MIC+48V and the INPUT switch of the
terminal is set to ANALOG, you can select the external microphone’s sensitivity.
1 Open the desired INPUT terminal’s sensitivity submenu.
> [
¡
# Audio Setup] > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]
Linking the audio level adjustment of CH1/CH2 or CH3/CH4
• When both CH1 and CH2, or CH3 and CH4, are set to the INPUT terminals or MIC terminal and to the
same type of analog audio source (external line input or external microphone), you can use the >
[
¡
! Audio Setup] > [CH1/CH2 ALC Link] or [CH3/CH4 ALC Link] setting to link the audio level
adjustment of both channels.
• When CH1 and CH2 are linked, you can use the CH1 audio level switch and audio level dial to affect both
CH1 and CH2. When CH3 and CH4 are linked, you can use the [Audio Rec Level CH3/CH4] and [CH3/CH4
Level] settings to affect both CH3 and CH4.
Operating modes:
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C200B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C200B in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C200B

Canon EOS C200B User Manual - German - 246 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info