683261
156
Zoom out
Zoom in
Previous page
1/236
Next page
Connecting to an External Monitor or Recorder
156
Options
1
Available only for output from the VIDEO terminal and the camera’s viewfinder (
k
only).
2
Only when [ ! Custom Picture/HDR] > [Preset] is set to [Canon Log 3]. Available only for SDI output.
NOTES
When you apply the [LUT: ACESproxy] LUT to the SDI terminal, it will output ACESproxy video data. Using a
compatible monitor, you can perform on-set color grading and check the image after color correction as you
continue shooting.
If you set an assignable button to [LUT: All] (A 125), you can press the button to turn on and off the LUTs
applied to all output terminals/screens at once.
If you change the > [ ! Custom Picture/HDR] > [Preset] or [Gamma] setting, the LUT will be
deactivated and all the terminals’ output settings will be reset to [LUT: Off].
Superimposing Onscreen Displays on Screens/Video Outputs
You can choose to superimpose onscreen displays on the video output from the SDI terminal or HDMI OUT
terminal. Doing so will display the onscreen displays on an external monitor. This setting will not affect your
recordings.
1 Open the [OSD Output] submenu.
> [
¢
% Monitoring Setup]
1
> [OSD Output]
2 Select [On] and then press the joystick.
T
appears on the right of the screen (only if [
¢
%
1
Monitoring Setup] > [Custom Display 2] > [OSD
Output] is set to [On]).
1
l
Appears on the previous page in the menu.
NOTES
When the video output from the HDMI OUT terminal is 4K (3840x2160) recorded at 59.94P or 50.00P, the
onscreen displays will not be superimposed on the video.
If you set an assignable button to [OSD Output] (A 125), you can press the button to turn on and off the
superimposing of onscreen displays on video output.
Applied LUT
Output Settings with LUT applied
Description
Gamma curve Color space
[LUT: BT.709] Wide DR BT.709
LUT for viewing on the screen or external monitors compatible with BT.709
specifications.
[LUT: HDR Assist. (1600%)]
1
,
[LUT: HDR Assist. (400%)]
1
Original gamma
curve
BT.709
LUT for viewing HDR (high dynamic range) images on monitoring devices
connected to the VIDEO terminal. The LUT follows the BT.2100 transfer
function to convert a brightness range of 1600% or 400% respectively into
output the same as video displayed on an HDR-compatible display.
[LUT: ACESproxy]
2
ACESproxy ACESproxy
LUT for viewing on external monitors compatible with the ACESproxy
standard established by ACES (Academy Color Encoding System). The signal
output will use full range coding.
[LUT: Off] No LUT applied.
Operating modes:
156


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C200 in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C200

Canon EOS C200 User Manual - German - 246 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info