The approx. 6.5 shots/sec. maximum high-speed continuous shooting
speed <o> (p.156) is achieved under the following conditions: Fully
charged battery pack, 1/500 sec. or faster shutter speed, maximum
aperture (varies depending on the lens), at room temperature (23°C /
73°F), flicker reduction disabled, and Live View shooting with One-Shot
AF*.
* With the AF mode set to One-Shot AF and the Image Stabilizer turned off when
using the following lenses: EF300mm f/4L IS USM, EF28-135mm f/3.5-5.6 IS
USM, EF75-300mm f/4-5.6 IS USM, EF100-400mm f/4.5-5.6L IS USM.
The continuous shooting speed for <o> high-speed continuous
shooting may decrease depending on the temperature, battery level,
flicker reduction, shutter speed, aperture, subject conditions, brightness,
AF operation, lens, Live View shooting, flash use, shooting function
settings, etc.
With [z4: Anti-flicker shoot.] set to [Enable] (p.206), shooting under
flickering light will decrease the maximum continuous shooting speed.
Also, the continuous shooting interval may become irregular and the
release time lag may become longer.
For Live View shooting, if [AF operation] is set to [Servo AF] (p.305),
the maximum continuous shooting speed will decrease.
With AI Servo AF, the maximum continuous shooting speed may become
slower depending on the subject conditions and the lens used.
Using an EX-series Speedlite will decrease the maximum continuous
shooting speed.
If the battery temperature is low due to a low ambient temperature, the
maximum continuous shooting speed may decrease.
If <B> or <M> is set, the time lag from when you press the shutter
button completely until the shutter is released will be longer than normal.
When internal memory becomes full during continuous shooting, the
continuous shooting speed may drop off because shooting will be
temporarily disabled (p.167).
Under [51: Wireless communication settings], if [Bluetooth
function] is set to [Smartphone], remote control shooting is not
possible. (The remote controller icon <R> is not displayed.)
