233159
21
Zoom out
Zoom in
Previous page
1/30
Next page
o
IMPORTANT
Observe the following precautions while the
firmware
is
being transferred to the camcorder.
-
Do
not disconnect the USB cable and do not
push the
DVD
Burner's disc tray closed.
-
Do
not turn off the camcorder or the
DVD
Burner.
-
Do
not disconnect the compact power adapter
from the camcorder.
Never insert the HG10 System Update Disc
CD-ROM to any device other than the Canon
DW-100
DVD
Burner. Canon shall not
be
liable
for any damage or malfunction caused
by
the'
use
of the supplied CD-ROM with any other
device.
CD
NOTES
No
other operations
can
be
performed
on
the
camcorder while the firmware
is
being transferred.
Updating
the
HG1
D's
Firmware
In
this step you will update the camcorder's
firmware
to
the new version you transferred
in
the previous section.
1
Move
the
I~
/0
switch
to
0 (Still
images).
2
Press
[FUNC.]
then
press.
or
~
to
select
[l1l:al
MENU]
and
press
@.
3
Press
or
~
to
select
[SYSTEM SETUP]
and
press
@.
4
Press.
or
~
to
select
[FIRMWARE
1.0.0.0]
and
press
@.
The last digit
in
the firmware version may be
a number other than
O.
5
Press
~
to
select
[OK]
and
press
@.
The CARD access indicator will flash as the
camcorder updates the firmware.
Do
not
turn
the
camcorder
off
or
disconnect
the
compact
power
adapter
while
the
firmware's
update
is
in
progress.
Doing
so
will
result
in a
malfunction
of
the
camcorder.
6
Check
that
the
firmware
update
was
completed
correctly.
After about 3 minutes, the CARD access
indicator will
go
off and
the
camcorder
will
restart automatically
in
still image playback
mode.
After the firmware update, the camcorder
is
reset
to
initial settings.
In
order
to
use it,
you will need
to
readjust the camcorder's
internal
clock
and change the language as
necessary.
o
IMPORTANT
Do
not touch or operate any of the camcorder's
controls (buttons, switches, dials, etc.) during the
firmware update.
If the camcorder's firmware
is
not updated
correctly contact a Canon Service Center.
CD
NOTES
After the firmware update, the camcorder
is
reset
to initial settings.
You
can verify that the firmware was updated
correctly by opening the
[SYSTEM
SETUP]
menu
as
described
in
steps 1-3. Check that the
firmware's version changed to 1.0.1.0.
If [FIRMWARE 1
.a.a.x]
appears grayed out
in
step 4 or the firmware upgrade option does not
appear
in
step
5,
the new firmware may not have
been transferred correctly to the camcorder
(CD
3).
In
such case, do the following.
-
Turn
off the camcorder and the
DVD
Burner
and disconnect the USB cable.
- Disconnect the
DVD
Burner's power adapter.
After a short while, reconnect the power
adapter and turn
on
the
DVD
Burner.
- Transfer the new firmware again, starting the
procedure from the beginning
(CD
2).
3
I
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon dw-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon dw-100 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info