500630
59
Zoom out
Zoom in
Previous page
1/71
Next page
Troubleshooting 57
The PC Does Not Recognize the Scanner
(Connecting via SCSI)
The following are possible causes of the PC failing to recognize the scanner.
Check each possible cause.
Cause The scanner is not connected correctly.
Action Check all the SCSI cable connections between the scanner, the
SCSI board in the PC, and any other SCSI devices connected to
the system.
Cause The SCSI board is not correctly installed in the PC.
Action Refer to the instruction manual for the SCSI board and correctly
install the SCSI board in the PC correctly.
Also check the following, depending on which operating system
you are using:
Windows 98/Me
Click Start - Settings - Control Panel - System - Device Manager,
and make sure that no “x” or “!” symbol appears next to the SCSI
Controller entry. If either of these symbols is displayed, refer to
the instruction manual for the SCSI board and make the SCSI
board settings again.
Windows NT 4.0 Workstation
Click Start - Settings - Control Panel - SCSI Adapter, and make
sure that the system recognizes the SCSI board properly. If the
system dose not recognize the SCSI board properly, refer to the
instruction manual for the SCSI board and make the SCSI board
settings again.
Windows 2000 Professional
Click Start - Settings - Control Panel - System - Hardware -
Device Manager, and make sure that no “x” or “!” symbol
appears next to the SCSI Controller entry. If either of these
symbols is displayed, refer to the instruction manual for the SCSI
board and make the SCSI board settings again.
Windows XP
Click Start - Control Panel - Performance and Maintenance -
System - Hardware - Device Manager, and make sure that no “x”
or “!” symbol appears next to the SCSI Controller entry. If either
of these symbols appears, refer to the instruction manual for the
SCSI board and reconfigure the SCSI board.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon DR 3080CII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon DR 3080CII in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info