709265

Canon DP-V3120 - Video Display Manual

6
Zoom out
Zoom in
Previous page
1/113
Next page
• Beforeuse,besuretoreadthisguide,includingthesafetyandhandlingprecautions.
• Readingthisguidewillhelpyoulearntousethevideodisplayproperly.
• Storethisguidesafelysothatyoucanuseitinthefuture.
English
Instruction Manual
Video Display Operation Guide
2
Table of Content
Introduction 3
Aboutthismanual 3
Trademarks 3
Operating the Video Display 4
BasicoperationstousetheOSDmenu 4
AdjustingImageQualityWhileViewingtheEntire
Image 5
TemporarilySavingParameters(AnchorPoint
Setting) 7
Enlargingthedisplay(Zoomfunction) 7
ChangingImageQualityAutomaticallyAccording
toInputSignal 8
Adjustimagequalityonleft/rightsideofscreen
(imagecomparisonmode) 9
Export/Import 10
SetDate/Time 13
InputtingCharacters 13
UsingtheFunction(F)Buttons 14
UsingtheChannel(CH)Button 15
CheckingSignalInformationandStatusofthe
MainUnit 18
Operatingthevideodisplayusinganexternal
device[REMOTEterminal(GPI)] 18
Operatingthevideodisplayusinganexternal
device[LANterminal] 19
Operatingthevideodisplayusinganexternal
device[USBterminal:Wi-Ficonnection] 20
Useawebbrowsertoremotelyoperatethe
videodisplay 22
OSD Menu 25
Adjustment 25
ChannelSettings 41
DisplaySettings 46
AudioSettings 50
MarkerSettings 51
FunctionSettings 56
PictureFunctionSettings 69
Network/IMDSettings 73
SystemSettings 75
SignalInformation 82
SystemInformation 82
Supported Signal Format 83
Image/Frame Display 98
Error Messages 101
Troubleshooting 103
Software Used in This Product 105
Index 110
About the User Manual for the Display
• SetupGuide(booklet):Thisdescribestheitemsthatshouldbefollowedtoensurethedisplaycanbeused
correctlyandsafely,andhowtoinstallandoperatethedisplay.Pleasereadbeforeusingthedisplay.This
comeswiththeproduct.
• OperationGuide(thisdocument):Thisexplainsthefunctionsofthisdisplayandhowtosetitup.
3
Introduction
TheOnScreenDisplay(thereafterreferredtoOSD)defaultlanguagesettingisEnglish.TochangetheOSDmenu
languagesetting,pleaserefertop.75.
About this manual
Someoftheillustrationusedinthemanualhavebeensimpliedforclarity.
Conventions used in this manual
:Indicatesareferencepage.
Note:Indicatesanote.
Reference:Indicatesreferenceinformation.
CAUTION:Indicatesanitemyoumustobserve.
[Adjustment] [PictureMode]:PressingtheMENUbuttonshowstheOSDMenulevels.Youcanmove
betweentheitemsandselectfromthem.
Trademarks
• HDMI,HDMIlogo,andHigh-DenitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI
LicensingAdministrator,Inc.intheU.S.andothercountries.
• VESAisaregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheU.S.andother
countries.
• Wi-Fi,WPA,andWPA2areregisteredtrademarksoftheWi-FiAlliance.
• AppleandSafariaretrademarksofAppleInc.registeredintheUnitedStatesandothercountries.
• GoogleandGoogleChromearetrademarksorregisteredtrademarksofGoogleLLC.
• Otherproductandcompanynameshereinaretrademarksorregisteredtrademarksoftheirrespectiveowners.
4
OperatingtheVideoDisplay
Usingbuttonsandjogdialonthevideodisplay,youcanadjustimagequalityandconguresettingsforinputsignals.In
addition,youcanassignfrequentlyusedfunctionstotheCH(Channel)andF(Function)buttons.
Basic operations to use the OSD menu
MENUbutton
Opens/closestheOSD
menu,ormovesupone
levelinamenu.
RESETbutton
Resetstheitemstobeadjustedusingthesliderand
enteredcharacters.
Jogdial
orrotation:Usedtomovetoadifferentitemandchange
settings.
Press:Conrmssettingsormovestheselectionframeup/down1level.
ThevideodisplaysettingsarechangedfromtheOSDmenu.
1 Open the OSD menu.
•PresstheMENUbutton.
2 Select the Main Menu.
•SelecttheMainMenuitemusingthejogdialandpressitto
determinetheselection.
3 Select the Sub Menu.
•SelecttheSubMenuitemusingthejogdialandpressitto
determinetheselection.
MainMenu
SubMenu
SettingOptions
Operating the Video Display
5
4 Select the setting to change.
•Selectthesettingtochangeusingthejogdialandpressitto
determinetheselection.YouwillbereturnedtotheSubMenu
itemselectionscreen.
5 Exit menu.
•PressingtheMENUbuttonwillreturnyoutotheMainMenu
itemselectionscreen.PressingtheMENUbuttonagainwill
closethemenuscreen.
Note
• Toadjustimagequality,warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafter
turningonthepowerbeforeuse.
• TheOSDmenuandsliderwilldisappearautomaticallyifnooperationisperformedforapproximately1minute.TheFbuttonwill
disappearautomaticallyifnooperationisperformedforapproximately10seconds.
• Thesettingsthatcannotbeset,aregrayedout.
• Thefollowingfunctionscanbereturnedtotheirfactorydefaultsettingsortheiranchorpoint(
7)bypressingtheRESETbutton,
afteradjustingtheimagequality.
-
[Contrast],[Brightness],[Chroma],[Sharpness],[Power],[Saturation],[Offset],[Slope]
When[PictureMode]
[User1–7]:Whenexecutingcalibration,pressingtheRESETbuttonwhileadjustingtheimagequalitywill
returnyoutothesettingsaftercalibration.
Adjusting Image Quality While Viewing the Entire Image
YoucanadjusttheOSDmenutodisplayasaslideratthebottomofthescreen.Thisallowsfortheimagequalitytobe
adjustedwhilstitisdisplayedonthescreen.
1 Press the jog dial when the selection frame is on setting options.
•Asliderappearsatthebottomofthescreen.
2 Make adjustments using the jog dial with using the slider as
guide.
3 When adjustments are completed, press the jog dial.
•ThescreenreturnstotheoriginalOSDmenu.
Operating the Video Display
6
Color temperature detailed settings (gain, bias)
YoucanadjustRGBallatonceorindividuallywhenthescreensforadjusting[Gain]or[Bias]aredisplayed.
1 Select [Adjustment] [Color Temperature].
•[GainR],[GainG],[GainB],[BiasR],[BiasG],and[BiasB]canbesetindividuallyusingthejogdial( ).
2 Select one.
•Thesettingscreenfor[Gain]or[Bias]willbedisplayed.
3 Switch the guide in the upper right area of the slider screen using the jog dial ( ).
•Theindicationchangesto[RGB],[R],[G],and[B].Selecting[RGB]willallowyoutoadjustRGBasawhole.
4 When adjustments are completed, press the jog dial.
•ThescreenreturnstotheoriginalOSDmenu.
Color temperature detailed settings (xy values)
1 Select [Adjustment] [Color Temperature].
2 Select [Custom (xy)].
•Youcanset[x]and[y]individuallyusingthejogdial( ).
3 Select either [x] or [y].
•Thecolormapisdisplayed.
4 Adjust [x] with the
and [y] with .
•Theadjustedvalueisindicatedbythe" "markonthecolormap.
5 When adjustments are completed, press the jog dial.
•ThescreenreturnstotheoriginalOSDmenu.
Defaultvalue
Lastusedvalue
Currentvalue
Currentvalue
Operating the Video Display
7
Temporarily Saving Parameters (Anchor Point Setting)
Youcantemporarilysaveparametersfor[Contrast],[Brightness],[Chroma],[Sharpness],and[HDRRange].See 30
forsettinganchorpointsduringCDLadjustment.
1 Select [Adjustment] [Anchor Adjustment].
2 Press the jog dial, and when the confirmation screen appears, select [OK].
•Theparameterissavedandtheanchorpointisset.
3 Adjust the image quality again and press the RESET button on the video display.
•Returnsyoutotheanchorpointforeachfunction.
CurrentvalueLastusedvalue
Anchorpoint
Note
• Executing[Adjustment] [Reset]or[SystemSettings] [ResetAllSettings]resetssavedanchorpointsandthesettingsreturn
totheirfactorydefaultvalues.
• Whencalibrationisexecuted,thevaluesaresavedasanchorpoints.
Enlarging the display (Zoom function) ( 47)
Thezoomdisplaypositioncanbeadjusted,andthezoommagnication(2x,4x,8x)canbeselected.
1 Select [Display Settings] [Zoom].
2 Select [Zoom Preset].
•Selectapresetzoomdisplay.
3 Select [Position].
•Thezoomadjustmentscreenisdisplayed.
-
Tomovethedisplayposition:Movethejogdial( orrotation).
-
Toreturntothecenter:PresstheRESETbutton.
4 When adjustments are completed, press the jog dial.
•ThescreenreturnstotheoriginalOSDmenu.
Note
• WhenmagnifyingtheimageandtheOSDmenuisnotbeingdisplayed,
-
youcansetthemagnicationratiobypressingthejogdial.
-
Youcanmovethedisplaylocationbymovingthejogdial
( orrotation).
-
YoucansetthefollowingfunctionsusingtheCHbutton:
CH1:Selectzoomtype;CH2:Switchbetweenzoompresets(Zoom1/Zoom2/Zoom3);CH3:Zoomoff
Zoom 2 [x4]
Operating the Video Display
8
Changing Image Quality Automatically According to Input Signal
Onthisvideodisplay,youcanautomaticallychangetheimagequalityaccordingtovideoresolutionormetadata.
Changing [Picture Mode] automatically ( 43)
1 Select [Channel Settings] [Select Channel].
•Selectthechannel.
2 Select [Channel Settings] [Picture Mode] [Type].
3 Select the Type using the jog dial.
Changing by individual video resolution (4K/2K)
Select[4K/2K].
Changing according to video resolution (4K/2K) or metadata (SDI)
Select[Automatic].
4 Select the Picture Mode.
Changing the image quality setting according to video metadata (HDMI) ( 33)
1 Select [Adjustment] [Picture Mode] [User 1-7].
•Selectanythingfrom[User1]to[User7].
2 Select [Channel Settings] [Picture Mode] [Type].
•Selectotherthan[L/R].
3 Select [Adjustment] [Detail Settings] [HDMI Link] [Automatic Adjustment].
•Select[On].
•See[HDMILink](
33)forthecongurablesettings.
Note
• Whenautomaticchangingofimagequalityaccordingtovideoresolution(4K/2K)orSDImetadataisset,
informationshowingwhichresolution(4K/2K,etc.)isselectedwillbedisplayedatthetoprightofthe
menuscreen.
Operating the Video Display
9
Adjust image quality on left/right side of screen (image comparison mode)
Youcandividethescreenintwoandadjusttheimagequalityontheleftandrightsidesofthescreenindividually.
1 Select [Channel Settings] [Picture Mode] [Type].
•Select[L/R].
2 Select the screen to adjust image quality.
•WhentheOSDmenuisopened:
-
Pressthe inthejogdialwhenthe[Adjustment]mainmenuisselected.
-
PresstheCH1buttonwhenthe[Adjustment]mainmenuorsubmenuisselected.
•WhentheOSDmenuisclosed:Switchusingthejogdial(
).
•Eachtimethetargetscreenisswitched,theset[PictureMode]isdisplayedatthetop.
3 Adjust the image quality on the selected screen.
Note
• WheninImageComparisonmode,aniconshowingwhichscreen(L/R)isselectedforimagequality
Adjustment,isdisplayedattherighttopofthe[Adjustment]menuscreen.
• Thefunctionsthatcannotbeusedwhentherightscreenisselectedareasfollows:
-
SubMenuitemsfor[Adjustment]:[Contrast],[BacklightControl],[HDR/SDRView]
• Whentwoscreensaredisplayed,youcanadjusttheimagequalityoneachscreenindividuallyandcomparethem.
-
Whentwoscreensaredisplayingthesameimage([SingleInputDualView] 44)
-
Whentwoscreensaredisplayingdifferentimages([MultiView(Dual)] 41)
-
YoucancheckHDR(HighDynamicRange)displayandSDR(StandardDynamicRange)displayside-by-side.([HDR/SDRView]
32)
Operating the Video Display
10
Export/Import
Youcanexport/importLUTandCDLparametersaswellasmainmenusettings.
LUT Import ( 31)
1 Insert a USB memory stick into the USB port of the main unit.
2 Select
[Adjustment] [Detail Settings] [LUT Import].
3 Select the file.
•Inthe[Filename]eld,searchanddisplayalewithextension[.clut]intherootfolder.
4 Select the LUT type.
•Refertothe"ConceptDrawingofDisplayImageProcessingandLUT"( 11).Or,alsorefertothe"UserLUT
CreationGuide"ontheCanonwebsite.
5 Select [Select LUT].
6 Select the standard color gamut.
•SelectthecolorgamutusedwhencreatingtheLUT(when[GamutLUT]under[LUTType]isselected).
7 Select [Execute].
•Whentheconrmationscreenappears,select[OK].Importstarts.
Note
• TheLUTleisproprietarytoCanonVideoDisplay.RefertotheCanonwebsitefortheleformatandhowtocreatetheLUTle.
• Upto1000LUTimportlesarerecognized.
• YoucandeletetheimportedLUT,aswellasrenametheLUT(
31).
Operating the Video Display
11
Import LUT file
（3D-LUT）
OSD Menu
Gamma/EOTF
Setting
or
Import LUT file
（1D-LUT）
or
Import LUT file
（3D-LUT）
OSD Menu
CDL/User LUT
Setting
OSD Menu
Color
Temperature
Setting
Color
Temperature
OSD Menu
Base Color
Gamut Setting
Color Gamut
Gamma 2.2
Color Gamut
（User selectable）
Color Temperature
（User selectable)
3D-LUT
（Gamut LUT）
1D-LUT
（Gamma LUT）
3D-LUT
（User LUT）
ConceptDrawingofDisplayImageProcessingandLUT
Export/Import Main Menu Settings ( 78)
1 Select [System Settings] [Export/Import].
2 Select [Export] or [Import].
Exporting
1
Select[Target]from[USB],[User1]to[User3]or[LAN].
Export[USB]totheUSBmemoryand[User1]to[User3]tothebuilt-inmemoryofthemainunit.Whenyou
select[LAN],theleisexportedtoadisplayconnectedviaLAN.
2
Ifyouselected[USB]or[User1]to[User3],select[Filename].
• Factorydefaultis[dinfo_dpv3120.dat].YoucanchangethenameoftheletobeexportedtotheUSBmemory
within16one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols.
Ifyouselected[LAN],select[Display].
• SelectthedisplaytowhichtoexportthesettingsfromthedisplaysconnectedviaLAN.
Importing
1
Select[Target]from[USB]or[User1]to[User3].
Specifythedestinationtosavetheletobeimported.
2
Select[Filename]when[USB]isselected.
3
In[Settings],select[All]orMainMenuname.
3 Select [Execute].
•Whentheconrmationscreenappears,select[OK].Export/Importstarts.
Operating the Video Display
12
Note
• Afterexportto[User1]to[User3],youcanselectthecongurationsatstartupfrom[User1]to[User3]in[PoweronSetting]in
[SystemSettings](
78
).
• Toexportthisdevice'ssettingstootherCanondisplays:
-
Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsettingranges,somesettingswillnotbecorrectlyexported
(settingswillnotbechanged,willreverttofactorydefaults,etc.)
-
Whentheexportiscompleted,amessagewillappearonthetargetdisplay.
Exporting/Importing CDL Parameters ( 30)
1 Select [Adjustment] [CDL/User LUT].
2 Select [CDL 1-8].
3 Select [Detail Settings]
[CDL Export] or [CDL Import].
Exporting
1
Select[CDLPreset].
2
Selectaleformat[.ccc]or[.cdl].
Importing
1
Select[Filename].
2
Select[CDLPreset].
4 Select [Execute].
•Whentheconrmationscreenappears,select[OK].Export/Importstarts.
Note
• Theexportedleisautomaticallysavedunderthename"YYYYMMDDhhmmss_Presetname.ccc(cdl)".
• Upto1000CDLimportlesarerecognized.
Operating the Video Display
13
Set Date/Time ( 75)
ThissectiondescribeshowtosetthevideodisplayDate/Time.ThevideodisplayDate/Timewillberesetifthepower
cordisnotconnectedforapproximately20days.
1 Select [System Settings] [Date/Time].
•AscreentoinputtheDate/Timeappears.
2 Set the Date/Time.
•Theselectionframemovesandnumberschangeasyouoperatethejogdial.Repeatuntilyoucompletesetting
theyear,month,date,hour,andminute.
3 Press the jog dial when you are finished.
•Theselectionframemovesto[OK].
4 Check the content and press the jog dial to confirm the settings.
Reference
• Whenselecting[Cancel]orpressingMENUbuttonbeforeselecting[OK],thesettingswillberesetandthepreviousscreenwillbe
displayed.
Inputting Characters
Thissectiondescribeshowtoinputthecharacters.
1 When the character input screen is displayed, use the
jog dial (
) to select the area you wish to input.
2 Select characters using the jog dial (
or rotation).
•Thefollowingcharacterscanbeselected:Press
buttonstodisplaythemonebyone.
Alphanumericcharacters:AtoZ,atoz,0to9
Symbols:,.:;‘`-+/=%&!?#_|$^~@{}[]<>
()space
•Charactersthatcannotbeenteredareautomaticallyskipped.
3 Repeat steps 1 and 2 until the desired text has been input.
4 Press the jog dial when you are finished.
•Theselectionframemovesto[OK].
5 Check the content and press the jog dial to confirm the settings.
Reference
• Whenselecting[Cancel]orpressingMENUbuttonbeforeselecting[OK],thesettingswillberesetandthepreviousscreenwillbe
displayed.
• Toerasecharactersintheselectionframeorresetit,presstheRESETbuttononthevideodisplay.
Operating the Video Display
14
Using the Function (F) Buttons
YoucanassignfunctionstotheFbuttonsonthevideodisplaytoexecutetheminstantly.Youcanassigndifferent
functionsonFbuttonsinthenormalandCDLmodesrespectively.
1 Select [System Settings] [Function/Channel Button] [Display Function] or [Display Function
(CDL)].
•Thebuttonselectionscreenwillbedisplayed.
2 Select the button name and press the jog dial.
3 Select the function to assign.
•Refertothe"FunctiontoallowregistrationforthedisplayFbuttons( 80)"fortheavailablefunctions.
4 Press the jog dial.
•Thesettingisconrmed.
Thefollowingcontentisassignedtofunctionbuttonsonthevideodisplaybyfactorydefault.
Fbutton Normalmode CDLmode
F1 PictureMode CDL/UserLUT
F2 Brightness CDLSOP/SAT
F3 TC/ALM CDL/UserLUTBypass
F4 WFM/VEC SingleInputDualView
F5 Histogram/Frame
Luminance
FalseColor
F6 PixelValueCheck OverRange
F7
ZoomPreset
2020OutsideofGamut
View
F8 FrameHold CompareView
Reference
• HoldingtheFbuttondownwilldisplaythefunctionselectionscreen,andyoucansetthefunctionyouwishtoregister.
• YoucancheckthefunctionassignedtotheFbuttonsofthemainunit.
Openthe
[SystemSettings] [OSDSettings] [FunctionButtonGuide]menuandselect[On].Pressing/movingthe
jogdial(
,orRotate)whileOSDisnotshowingwilldisplaythelistoffunctions.Selectingafunctionfromthelistand
pressing/moving(
)thejogdialwilldisplaythedetailedsettingsscreen,orexecutethatfunction.
Operating the Video Display
15
Using the Channel (CH) Button
Youcanassignchannels(varioussettingsrelatedtoinputsignal)totheCHbuttonsonthevideodisplayandswitch
channelsinstantly.
1 Select [System Settings] [Function/Channel Button] [Display Channel].
•Thebuttonselectionscreenwillbedisplayed.
2 Select the button name and press the jog dial.
3 Select the channel to assign.
•See[ChannelSettings]( 41)forthecongurablesettings.
4 Press the jog dial.
•Thesettingisconrmed.
Operating the Video Display
16
Thefollowingcontentisassignedtochannelbuttonsonthevideodisplayandtoeachchannelbyfactorydefault.
CH CH1 CH2 CH3 CH4 CH5
InputConguration 12-3G/HD-SDI HDMI 3G-SDIRAW 12-3G/HD-SDI 12-3G/HD-SDI
SelectInputSignal Automatic Automatic Automatic Automatic Automatic
ImageDivision Automatic Automatic Automatic Automatic Automatic
LinkOrder Automatic Automatic Automatic Automatic Automatic
Format Automatic Automatic Automatic Automatic Automatic
AudioInput Automatic Automatic Automatic Automatic Automatic
Marker/TC/CameraInfoInput InputA InputA InputA InputA InputA
InternalSync Off Off Off Off Off
ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)
PictureMode
Type
Normal Normal Normal 4K/2K L/R
PictureMode
PictureModeL
Resolution4K
ITU-RBT.709 ITU-RBT.709 CINEMAEOS
SYSTEM
User1
(2020PQ)
User1
(2020PQ)
PictureModeR
Resolution2K
ITU-RBT.709
Payload UHD/PQ User1(2020PQ)
UHD/HLG User2(2020HLG)
UHD ITU-RBT.2020
709/PQ —
709/HLG —
709 ITU-RBT.709
VANC —
Unknown —
Camera CINEMA
EOS
SYSTEM
CINEMAEOSSYSTEM
ARRI User6
VARICAM User7
SingleInputDualView Off Off Off Automatic Off
Separator Off Off Off Off White
Operating the Video Display
17
CH CH6 CH7 CH8 CH9 CH10 to CH20
InputConguration 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI —(Notset)
SelectInputSignal Automatic Automatic Automatic Automatic Automatic
ImageDivision Automatic Automatic Automatic Automatic Automatic
LinkOrder Automatic Automatic Automatic Automatic Automatic
Format Automatic Automatic Automatic Automatic Automatic
AudioInput Automatic Automatic Automatic Automatic Automatic
Marker/TC/CameraInfoInput InputA InputA InputA InputA InputA
InternalSync Off Off Off Off Off
ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)
PictureMode
Type
L/R 4K/2K L/R L/R Normal
PictureMode
PictureModeL
Resolution4K
User1
(2020PQ)
User2
(2020HLG)
User2
(2020HLG)
User2
(2020HLG)
ITU-RBT.709
PictureModeR
Resolution2K
ITU-RBT.709
Payload UHD/PQ User1(2020PQ)
UHD/HLG User2(2020HLG)
UHD ITU-RBT.2020
709/PQ —
709/HLG —
709 ITU-RBT.709
VANC —
Unknown —
Camera CINEMA
EOS
SYSTEM
CINEMAEOSSYSTEM
ARRI User6
VARICAM User7
SingleInputDualView Automatic Automatic Off Automatic Off
Separator Off Off White Off Off
Note
• HoldingtheCHbuttondowndisplaysthechannellist,allowingtheusertoselectthedesiredchannel.However,inthefollowing
cases,alistofinputsignalswillbedisplayedandtheusercantemporarilyswitchsignals:Whena12G-SDIsignalor6G-SDI
signalisinput;orwhenvideothatcanbedisplayedsimultaneouslywitha12G-SDIor6G-SDIsignalisinputand[SelectInput
Signal]issetto[Automatic].
Operating the Video Display
18
Checking Signal Information and Status of the Main Unit
Thevideodisplayisequippedwithabannerdisplayfunction.
1 Press the jog dial when the OSD menu is closed.
•Thechannelname,signalinformation,andstatusofthemainunitwillbedisplayedinthebanner.Itwill
automaticallydisappearafter6seconds.
Note
• Youcanselecthowthebannerisdisplayed( 76).
[SystemSettings] [OSDSettings] [Banner]
• Youcanmonitortheinputsignalstatus.(
62)
[FunctionSettings] [SignalMonitoring]
• Formoredetailedsignalinformation,pleaserefertothesectionon[SignalInformation](
82).
• The[Detectingsync.]bannerwillcontinuetoappearuntiltheinputsignalissynchronized.
Operating the video display using an external device [REMOTE terminal
(GPI)]
YoucanoperatethevideodisplayusinganexternaldeviceconnectedtotheREMOTEterminalandexecutethe
functionsregisteredineachpin.Remoteoperationispossibleonlywhenthevideodisplayisturnedon.
PinlayoutforREMOTEterminal
PinNo. Signal Factorydefault
1 Pin1 CH1
2 Pin2 CH2
3 Pin3 CH3
4 Pin4 TimeCode
5 Pin5 TallyGreen Atallyappearsatthe
topofthescreen.
6 Pin6 TallyRed
7 Pin7 PowerOn
8 Pin8(GND) —
1 Connect an external control device to the REMOTE terminal.
2 Select
[System Settings] [Remote(GPI)].
•Thepinselectionscreenwillbedisplayed.
3 Select a pin number and press the jog dial.
4 Select the function to assign.
•Pleasesee[Remote(GPI)]( 75)forsettablefunctions.
5 Press the jog dial.
•Thesettingisconrmed.
Operating the Video Display
19
Operating the video display using an external device [LAN terminal]
ThevideodisplaysupportsTelevisionSystemsLtd.’s“TSLUMDProtocolVer.5.0”.Youcanoperatethevideodisplay
usinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersandtallylightsonthescreen.Thereare
twotallylights,ontheleftandright.Upto16characterscanbedisplayed.
Tallydisplay(left) Characterdisplay Tallydisplay(right)
1 Connect an external control device to the LAN terminal.
2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings.
3 Select
[Network/IMD Settings] [In Monitor Display].
4 Select [Control]
[TSL Ver. 5.00].
•Thiswillallowoperationfromanexternalcontroldevice,anddisplaycharactersandtallylights.
5 Select [Position] [Top] or [Bottom].
•Thissetsthepositionwherecharactersandtallylightswillbedisplayed.
Note
• When[MultiView(Dual)]or[MultiView(Quad)]isdisplayed,setthe[INDEX]settingtofrom[0x0001]to[0x0004].
• Theportnumberforthecontrollingisxedat"45000".
• With[InMonitorDisplay]youcanalsodisplayuser-selectedcharactersonthescreen.(
74)
Operating the Video Display
20
Operating the video display using an external device [USB terminal: Wi-Fi
connection]
AWi-FiadaptercanbeconnectedtotheUSBterminalofthevideodisplaysothatthevideodisplaycanbeconnected
toaportableterminalintheWi-Finetworkenvironmentinuse.Thefollowingtwomethodscanbeusedtoconnect:
Infrastructure:ThismethodconnectstoWi-Fiviaanaccesspoint.
AccessPoint:Thisdeviceactsasanaccesspoint,andthismethodconnectsthedevicedirectlytotheWi-Fidevice.
• NetworksettingssuchasIPaddressandsubnetmaskareacquiredautomatically.
• Supportedencryptionschemes
Infrastructure:WEP64(ASCII),WEP128(ASCII),WPA-TKIP,WPA-AES(CCMP),WPA2-TKIP,WPA2-AES(CCMP)
AccessPoint:WPA2-AES(CCMP)
CAUTION
• Notethatwecannotacceptanyliabilityfordamagesthatariseasaresultofincorrectsettingsmadeonthenetworktouse
networkfunctionsandfordamagethatariseasaresultofuseofthisfunction.
• AvoidconnectingtoWi-Fiornetworkenvironmentsthatarenotprotectedbyappropriatesecuritymeasures.
Rememberto
changethedefaultpasswordwhensettingtheaccesspoint.Doingsomaycausethecustomers’personalinformationorother
importantinformationtoleaktoathirdparty.WhennotusingWi-Fi,set[Wi-Fi]
[Control]to[Off].
• ThespecicationsandrestrictionsofWi-FiconnectionmethodsdifferdependingontheWi-Finetworkinuse.
• ThereisnoguaranteethattheWi-Fiadapterfunctionsinusewillworkonthevideodisplay.ForinformationaboutWi-Fiadapter
relateddefects,contactthedevicemanufacturer.Also,invariouscountriesandregions,approvalisneededtousetheWi-Fi
adapter,anduseofnon-approvedWi-Fiadaptersisnotpermitted.Ifyouareunclearofwhetherornotuseisapproved,check
withthedevicemanufacturer.
Note
• RefertotheCanonwebsiteforalistofsupporteddevices(Wi-Fiadapters).
• FordetailsonhowtousetheWi-Fiadapter,precautionsforuse,howtosetaccesspoints,andotherinformation,eitherreferto
thedeviceInstructionManualorcontactthemanufacturer.
• Upto24accesspointscanbedisplayedandselectedonthevideodisplay.
1 Connect the Wi-Fi adapter to the USB terminal.
2 Select
[Network/IMD Settings] [Wi-Fi].
When using the [Infrastructure] method
3 Select [Control] [Infrastructure].
4 Set the access point to connect to.
5 If a password is needed when connected to an access point, enter the password (
73).
•Thisissetusingupto24alpha-numericalcharactersandsymbols.Thefollowingcharacterscanbeentered.
Alphanumericcharacters:AtoZ,atoz,0to9
Symbols:_or-
Operating the Video Display
21
When using the [Access Point] method
3 Select [Control] [Off].
4 Select [Access Point] (
73).
•EntertheSSID.Thisissetusingupto24alpha-numericalcharactersandsymbols.
•Setthecommunicationmode.
•Setthechannel.
•Enterthepassword.Thisissetusingbetween8and24alpha-numericalcharactersandsymbols.
•[SSID],[Password]:Thefollowingcharacterscanbeentered.
Alphanumericcharacters:AtoZ,atoz,0to9
Symbols:_or-
5 Select [Control] [Access Point].
Operating the Video Display
22
Use a web browser to remotely operate the video display
AwebbrowsercanbeusedtoremotelyoperatethevideodisplayusingacomputerterminalconnectedtotheLAN
terminaloraportableterminal( 20)connectedviaaWi-FiadaptertotheUSBterminal.Fromthedeviceconnectedto
thenetwork,youcanchangeimagequalitysettingsorswitchchannels.
Thisfunctionchecksoperationusingthefollowingwebbrowsers.
• Safari(Apple)
• GoogleChrome(Google)
※ *CorrectoperationcannotbeguaranteedonallsupportedOSorwebbrowsereditions.
CAUTION
• RemembertochangethedefaultsettingsforIDandPasswordwhenusingthisfunction.
Note
• Accessisonlypossiblefromasingleterminal.
• ThisfunctionmaynotworkifthevideodisplayisaccessedusingLANandaWi-Fiadapter,atthesametime.
• Openingmultiplepagesinmultipletabsonthewebbrowsercancauseittonotfunctionproperly.
• Executing[Capture]inthe[View]screencancausethevideoonthisvideodisplaytopausetemporarily.
• Operatingthevideodisplayitselfwhileitisbeingaccessedfromawebbrowsercancausethenetworkconnectiontobelost.
• Adelaymayoccurinvideodisplayorinthevarioussettingsdependingonthenetworkenvironmentandcommunication
conditions.
• TheIPaddresscanbecheckedinthe[SystemInformation]screen.
• TheoperationscreenonlydisplaysEnglish.
1 Connect external control devices via the network.
2 Select
[Network/IMD Settings] [Web].
3 Select [Control]
[On].
4 Select [User ID] and [Password] (
73).
•[UserID]:EntertheuserID.Thisissetusingupto16alpha-numericalcharactersandsymbols.
[Password]:Enterthepassword.Thisissetusingbetween8and16alpha-numericalcharactersandsymbols.
Thefollowingcharacterscanbeentered.
Alphanumericcharacters:AtoZ,atoz,0to9
Symbols:_or-
5 Start up a web browser on the device connected to a network.
6 Enter the IP address of this video display in the address bar.
•Theremoteoperationscreenisdisplayedonthewebbrowser.
•Whenthebasicauthenticationscreenisdisplayed,entertheuserIDandpassword.
7 When operation ends, close the web browser.
Operating the Video Display
23
■
Operation screen
[View] screen
Afterpressingoneoftheimagecapturebuttons,thecapturedimagewillbedisplayed.YoucanalsooperatetheCH
buttonsandFbuttons(function/channelbuttons).
[Control] screen
AllowsthePictureMode,Channel,andvariousmarkerdisplaystobeset.
[Name/ID/Password]
Enterthetext.
[Get]:Getthetextdatatobeentered.
[Set]:Applythetextdatatothetextinputscreen.
[Zoom/PixelValue]
Setsthedisplaypositionfor[Zoom]orthepixel
positionfor[PixelValueCheck].
[Setting] screen
YoucanimportLUT,export[FrameLuminanceMonitor],andimportorexportthisvideodisplay'ssettings.
[LUTImport(UserLUT)]
ImportsaLUT.WhentheLUTimportiscompleted,the
settingoftheimportedLUTwillbeappliedtothecurrent
[PictureMode]'s[CDL/UserLUT].
[FrameLum.MonitorExport]
Exports[FrameLuminanceMonitor].Exporting[Frame
LuminanceMonitor]willcreatea"latest.csv"leforthe
luminanceinthenalscreenandan"all.tar.gz"le(ale
compressedusingthetar.gzmethod)thatcontainsall
acquiredluminanceinformation.
Capturedimage
Imagecapturebutton
Operating the Video Display
24
[lnformation] screen
Displaysthesettingsfor[Adjustment]and[ChannelSettings],andinformationfor[SignalInformation]and[System
Information].
[Link] screen
YoucandisplayalistofthedisplayconnectedviaLANtothisvideodisplay,set[DisplaySettingLink],andchange
thedisplaynames.
25
OSDMenu
Adjustment
Thismenuisusedtoadjusttheimagequality.Thefactorydefaultsdifferaccordingtothe[PictureMode]setting.( 38)
Sub Menu Setting Options (Bold: factory default)
PictureMode
SMPTE-C
EBU
ITU-R BT.709
ITU-RBT.2020
AdobeRGB
DCI-P3
User1(2020PQ)
User2(2020HLG)
User3(DCIPQ)
User4(DCIPQD65)
User5~User7
CINEMAEOSSYSTEM
ACESproxy(ver.1.0.1)
1
Selectapresetmode.
[SMPTE-C],[EBU],[ITU-RBT.709],[ITU-RBT.2020],[AdobeRGB],
[DCI-P3]:Modesettothebrightness,colortemperature,gamma/EOTF,
andcolorgamutofthethreeprimarycolorschromaticitypointsof
eachstandard.
[User1–7](User1(2020PQ),User2(2020HLG),User3(DCIPQ),
User4(DCIPQD65),User5~User7):Thismodeallowsyoutoseteach
itemin[Adjustment]individually.Youcanchangethemodename
within24one-bytecharactersincludingalphabeticalcharacters,
numbers,andsymbols(
33).
[CINEMAEOSSYSTEM]:CanonLogistheidealmodefordisplaying
imagescapturedwithCinemaEOScameras.UsingCameraLink,you
canhavetheimagequalitysettingchangeautomatically([Automatic
Adjustment(CINEMAEOS)]
63).
[ACESproxy(ver.1.0.1)]:AmodetodisplayACESproxyvideosinoptimum
gamma/EOTFandcolorgamut.
Contrast
2
0to20000 Adjuststhewhiteleveloftheimage.(Incrementsof1)
Brightness -500to500(0) Adjuststheblackleveloftheimage.(Incrementsof1)
Chroma
3
0to2000(1000) Adjuststhecolorsaturationoftheimage(colordepth).(Incrementsof1)
Sharpness 0to100(0) Adjuststhesharpnessoftheimage.(Incrementsof1)
BacklightControl
4
LocalDimming
Automatic
LocalDimmingHigh
LocalDimmingLow
Off
Switchesthebacklightcontrolmethod.
Localdimmingisatechnologytocontroltheamountoflightemitted
bythebacklightforeachdisplayarea.Thebacklightofbrightareais
increasedandthedarkareaisdecreasedaccordingtothedisplayed
content.
[Automatic]:ThismodeissuitableforcheckingHDRimages.
[High]:Thismodeissuitableforcheckingimageswithalotofbrightareas.
[Low]:ThismodeissuitableforcheckingSDRimages.
OSD Menu
26
Sub Menu Setting Options (Bold: factory default)
ColorTemperature
5
D93,D65,D65Custom,
D61,D60,D56,D50,
DCI-P3
Custom(xy),Off
• Whenapresetis
selected
GainR/G/B:
0to1023
BiasR/G/B:
-500to500(0)
• WhenCustom(xy)is
selected
x:0.260to0.360
y:0.260to0.360
Setsthecolortemperature.(
6)
[D93],[D65],[D61],[D60],[D56],[D50],[DCI-P3]:Selectfrompresetcolor
temperatures.
[D65Custom]:Thispresetisforadjustingthecolorofthevideodisplay
anddisplayshavingdifferentdisplaycharacteristics.Thegainand
biasareadjustedbasedonD65.
[GainR/G/B],[BiasR/G/B]:Adjuststhepresetcolortemperature.
(Incrementsof1)
[Custom(xy)]:AdjustsCIExandy.(Incrementsof0.001)
ColorGamut
6
SMPTE-C
EBU
ITU-RBT.709
ITU-RBT.2020
AdobeRGB
DCI-P3
Native
CinemaGamutto709
CinemaGamutto2020
CinemaGamuttoDCI
DCI-P3+to709
DCI-P3+toDCI
S-Gamut3to709
S-Gamut3to2020
S-Gamut3toDCI
S-Gamut3.Cineto709
S-Gamut3.Cineto2020
S-Gamut3.CinetoDCI
GamutLUT1to
GamutLUT8
Setsthecolorrange.
When[PictureMode]
[User1–7]or[CINEMAEOSSYSTEM]
[SMPTE-C],[EBU],[ITU-RBT.709],[ITU-RBT.2020],[AdobeRGB],
[DCI-P3]:Colorgamutcomplianttoeachstandard.
[Native]:Colorgamutthatcanbedisplayedbythisvideodisplay.
[CinemaGamutto709],[CinemaGamutto2020],
[CinemaGamuttoDCI],[DCI-P3+to709],[DCI-P3+toDCI]:Modes
wherethecolorgamutisconvertedtomonitorCinemaGamutand
DCI-P3+videosrecordedbytheCinemaEOScameras.
[S-Gamut3to709],[S-Gamut3to2020],[S-Gamut3toDCI],
[S-Gamut3.Cineto709],[S-Gamut3.Cineto2020],
[S-Gamut3.CinetoDCI]:Presetmodeswherethecolorgamutis
converted.
[GamutLUT1]to[GamutLUT8]:SelectsanexternalLUT.
OSD Menu
27
Sub Menu Setting Options (Bold: factory default)
Gamma/EOTF
7
1.0,2.2,2.35,2.4,2.6,
ITU-RBT.1886
SMPTEST2084(PQ)
HybridLog-Gamma
HybridLog-GammaRGB
CanonLog
CanonLog(HDR)
CanonLog2
CanonLog2(HDR)
CanonLog3
CanonLog3(HDR)
S-Log2(HDR)
S-Log3(HDR)
GammaLUT1to
GammaLUT8
Off
SetstheGamma/EOTF.
[1.0],[2.2],[2.35],[2.4],[2.6],[ITU-RBT.1886],[CanonLog],[CanonLog2],
[CanonLog3],[S-Log2(HDR)],[S-Log3(HDR)]:Selectthepresetgamma.
[SMPTEST2084(PQ)],[HybridLog-Gamma],[HybridLog-GammaRGB],
[CanonLog(HDR)],[CanonLog2(HDR)],[CanonLog3(HDR)]:Selectthe
gamma/EOTFforHDRdisplay.
[GammaLUT1]to[GammaLUT8]:SelectsanexternalLUT.
About[HybridLog-Gamma]
Thisvideodisplaysupportsthefollowingtwomethods.
[HybridLog-Gamma]:Thismethodprocessesthesystemgammaforthe
Ysignal(CompliantwithITU-RBT.2100).
[HybridLog-GammaRGB]:Thismethodprocessesthesystemgamma
fortheRGBsignal.
Ifusing[HybridLog-Gamma]thenthesystemgammavaluewillbe
displayedinthe[SettingOptions]onthemenuscreen.
OSD Menu
28
Sub Menu Setting Options (Bold: factory default)
HDRRange SetsthedisplaymethodwhenGamma/EOTFforHDRdisplayisselected.
SMPTEST2084(PQ) 100to10000(2000) Setsthe[SMPTEST2084(PQ)]dynamicrangetobedisplayed,from0.005
to10,000cd/m
2
(nits).(100to4000:100increments.4000to10000:
1000increments)
HybridLog-Gamma 100to1000 Setshowfartodisplaythe[HybridLog-Gamma]dynamicrange.
(inincrementsof100)
Theupperlimitvaluewillchangetomatchthesettingsof[HybridLog-
GammaSystem].(
32)
HybridLog-Gamma
RGB
100to1000/2000
CanonLog(HDR) 100to800 Setsthe[CanonLog]dynamicrangetobedisplayed,from0to800%.(in
100increments)
CanonLog2(HDR) 100to1600 Setsthe[CanonLog2]dynamicrangetobedisplayed,from0to1600%.
(in100increments)
CanonLog3(HDR) 100to1600 Setsthe[CanonLog3]dynamicrangetobedisplayed,from0to1600%.
(in100increments)
S-Log2(HDR) 100to1400(1000) Setshowfartodisplaythe[S-Log]dynamicrange.(in100increments)
S-Log3(HDR) 100to3900(1000)
GammaLUT1to
GammaLUT8
512to1023 Setshowfartodisplaythe10-bitLUTdatadynamicrange,from0to
1023.(in1increments)
Settingprocedures
Theexplanationuses[SMPTEST2084(PQ)]asanexample.
Whensetat“2000,”thoseareasthatexceed2,000cd/m
2
areclipped,andthosethatare2,000cd/m
2
orbelowareassigned
tothedynamicrangeofthevideodisplay.WhendisplayinganimagewithaPQof2,000cd/m
2
,youcanchecktheentire
dynamicrangeoftheimage.Also,whendisplayinganimagewithaPQof4,000cd/m
2
,youcanchecktheimageupto
2,000cd/m
2
.
Whensetat“2000,”thoseareasthatexceed4,000cd/m
2
areclipped,andthosethatare4,000cd/m
2
orbelowareassigned
tothedynamicrangeofthevideodisplay.WhendisplayinganimagewithaPQof4,000cd/m
2
,althoughtheapparent
brightnesslowers,youcanstillcheckallthedynamicrangeoftheimage.
ThebrightnessofthevideodisplaycorrespondstothevaluesetforContrast.
4,000 cd/㎡
2,000 cd/㎡
4,000 cd/㎡
2,000 cd/㎡
2,000 cd/㎡
2,000 cd/㎡
SMPTE ST 2084 (PQ) 4,000 cd/m
2
signal
(Contrast: [20000])
SMPTEST2084(PQ):Setto[4000]SMPTEST2084(PQ):Setto[2000]
SMPTEST2084
range
SMPTEST2084
range
Rangeof
videodisplay
Rangeof
videodisplay
Gradationisreproducedbyassigning
therangetotherangeofthe
videodisplay(whichlowers
thebrightness).
Clip(Saturatesgradation.)
Brightnessvalue
correspondingto
thecontrastsetting
OSD Menu
29
Sub Menu Setting Options (Bold: factory default)
ColorRange
8
Automatic
Full
SDIFull(4-1019)
Limited
Setsthequantizationrange.
[Automatic]:Setstherangebasedonsignalinformationautomatically.
InputTransform Automatic
Off
When[PictureMode] [ACESproxy(ver.1.0.1)]
SetswhethertoapplyACESInputTransformtothe[3G-SDIRAW]signal
(
41).
[Automatic]:Appliedautomatically.
[Off]:Notapplied.
OutputTransform ITU-RBT.709
ITU-RBT.2020
DCI-P3
When[PictureMode] [ACESproxy(ver.1.0.1)]
Displayedinsteadof[Gamma/EOTF]or[ColorGamut].
[ITU-RBT.709],[ITU-RBT.2020],[DCI-P3]:ACESproxyisconvertedinto
respectivemode.
OutputTransformSurround DimSurround
DarkSurround
When[PictureMode] [ACESproxy(ver.1.0.1)]
Displayedinsteadof[Gamma/EOTF]or[ColorGamut].
[DimSurround]:EnablesDimSurroundprocessspeciedbyACESproxy.
[DarkSurround]:EnablesDarkSurroundprocessspeciedbyACESproxy.
OSD Menu
30
Sub Menu Setting Options (Bold: factory default)
CDL/UserLUT
9
ConguressettingsforCDLorUserLUT.
CDL/UserLUT
CDL1toCDL8
User LUT 1toUser
LUT8
Off
Onlywhen[Picture
Mode]is[User1-7]
ARRI(Rec2100-PQ-
1K-100)
ARRI(Rec2100-HLG-
1K-200)
VARICAM(V-Logto
V-709)
2020PQto2020SDR
2020PQto709SDR
2020HLGto709HLG
2020HLGto709SDR
SelectapresetsuchasCDLorexternalLUT.
Power 0.50to4.00(1.00) AdjuststheGammaoftheimage.(0.01increments)
Saturation 0.000to2.000(1.000) Adjuststhecolorsaturationoftheimage.(0.001increments)
Offset -1.000to1.000(0.000) Adjuststheblackleveloftheimage.(0.001increments)
Slope 0.000to2.000(1.000) Adjuststhewhiteleveloftheimage.(0.001increments)
CDL/UserLUTBypass On,Off [CDL]:Whensetto[On],youcantemporarilydisabletheCDLadjustment
resultandreturntopreviouslysetimagequality.
[UserLUT]:Whensetto[On],youcanreturntotheimagequalitybefore
userLUTwasapplied.
DetailSettings
CDLExport ExportsCDLparameters.
CDLPreset CDL1toCDL8
All
FileType CCC
CDL
Execute
CDLImport ImportsCDLparameters.
Filename
CDLPreset CDL1toCDL8
Execute
CDLPresetName Youcanspecifythenameofpresetmodewithin16one-bytecharacters
includingalphabeticalcharacters,numbers,andsymbols.
AnchorCDL Youcantemporarilysaveparametersfor[Power],[Saturation],[Offset],
and[Slope]andrecoverthevalues.(anchorpointsetting)
ResetCDL ResetsCDLparameters.
OSD Menu
31
Sub Menu Setting Options (Bold: factory default)
DetailSettings
SetsdetailsforPictureMode.
LUTImport YoucanimportLUT.Filenamesthatcanbeimportedcanbeupto48one-bytecharacters,including
alphabeticalcharacters,numbers,andsymbols(includingleextensions).
Filename Selectalename.
LUTType User LUT
GammaLUT
GamutLUT
SelecttheLUTtype.
SelectLUT UserLUT1-8
GammaLUT1-8
GamutLUT1-8
BaseColorGamut SMPTE-C
EBU
ITU-R BT.709
AdobeRGB
DCI-P3
Native
When[LUTType] [GamutLUT]
SelectsthecolorgamutusedwhencreatingtheLUT.
Execute Performsimport.
LUTName YoucanspecifythenameofLUTwithinone-byte24charactersincludingalphabeticalcharacters,
numbers,andsymbols.
LUTType User LUT
GammaLUT
GamutLUT
SelecttheLUTtype.
SelectLUT UserLUT1-8
GammaLUT1-8
GamutLUT1-8
InputName InputtheLUTname.
LUTDelete DeletesimportedLUT.
LUTType User LUT
GammaLUT
GamutLUT
SelecttheLUTtype.
SelectLUT UserLUT1-8
GammaLUT1-8
GamutLUT1-8
Delete DeletesLUT.
OSD Menu
32
Sub Menu Setting Options (Bold: factory default)
YCbCrColorMatrix Automatic
ITU-RBT.709
ITU-RBT.2020
SetsthematrixconversionmethodforinputsignalsinYCbCrformat.
[Automatic]:MatrixcoefcientissetinconformancewiththeITU-R
BT.2020standardwhenthe[PictureMode]or[ColorGamut]settingis
[ITU-RBT.2020]andinconformancewiththeITU-RBT.709standard
otherwise.
[ITU-RBT.709]:MatrixcoefcientissetinconformancewiththeITU-R
BT.709standard.
[ITU-RBT.2020]:MatrixcoefcientissetinconformancewiththeITU-R
BT.2020standard.
2020Constant
Luminance
10
ConstantLuminance
Non-constant
Luminance
When[PictureMode]or[ColorGamut] [ITU-RBT.2020]
Setsthecolormatrixconversionmethod.
[ConstantLuminance]:YUVsignalsarelinearlyconvertedandthen
convertedintoRGBsignals.
[Non-constantLuminance]:YUVsignalsareconvertedintoRGBsignals
withoutchanginggamma0.45.
2020GamutMapping GamutMapping
Clipping
When[PictureMode]or[ColorGamut] [ITU-RBT.2020]
[GamutMapping]:Mappingisperformedoncolorsoutsidethenative
colorgamutbyCanon'suniquemethod.
[Clipping]:Colorsoutsidethenativecolorgamutareclippedbyageneral
method.
HybridLog-Gamma
System
Automatic
Manual
• WhenManualis
selected
[Gamma/EOTF]
When[HybridLog-
Gamma]
1.000to1.500 (1.200)
When[HybridLog-
GammaRGB]
γ
1.2 - 1000 cd/m
2
γ
1.2-2000cd/m
2
When[Gamma/EOTF] [HybridLog-Gamma]or[HybridLog-Gamma
RGB]
Setsthesystemgammaorpeakluminance.
[Automatic]:When[HybridLog-Gamma]isselected,itadjuststhesystem
gammaautomaticallytomatchthecontrastvalue.Itcannotbeset
when[HybridLog-GammaRGB]isselected.
[Manual]:Operationswhen[HybridLog-Gamma]or[HybridLog-Gamma
RGB]isselectedareasfollows:
[HybridLog-Gamma]:Adjuststhesystemgamma.(Incrementsof
0.005)
[HybridLog-GammaRGB]:Setsthepeakluminance.Themaximum
valueforeachsettingbecomestheupperlimitvalueof[HDRRange].
HDR/SDRView
11
On,Off TheHDR(HighDynamicRange)andSDR(StandardDynamicRange)
displayscanbecompared.
[On]:TherightscreenisdisplayedatSDRluminance.
[Off]:DoesnotcomparetheHDRandSDRdisplay.
OSD Menu
33
Sub Menu Setting Options (Bold: factory default)
HDMILink
12
When[PictureMode] [User1–7]
Videois displayedat theimagequalitylinkedto the videoimagequalitysettingusingtheHDMI
metadata.
AutomaticAdjustment On,Off
ColorGamut/Gamma/
EOTF
On,Off Matchesthe[ColorGamut]and[Gamma/EOTF]settingsofthevideo
displaywiththeHDMImetadata.
Contrast/HDRRange On,Off Matchesthe[Contrast]and[HDRRange]settingofthevideodisplaywith
theHDMImetadata.
CopyPictureMode
13
When[PictureMode] [User1–7]
CopythePictureModesettings.
PictureMode(Copy
from)
SMPTE-C
EBU
ITU-R BT.709
ITU-RBT.2020
AdobeRGB
DCI-P3
User1(2020PQ)
User2(2020HLG)
User3(DCIPQ)
User4(DCIPQD65)
User5~User7
Select"PictureMode(Copyfrom)".
[User1–7]:Selectfromotherthanthecurrentlysetmode.
Execute Performscopy.
PictureModeName Youcanchangethenameof[User1–7]within24charactersincluding
alphabeticalcharacters,numbers,andsymbols.
AnchorAdjustment OK
Cancel
Temporarilysavesparametersforadjusting[Contrast],[Brightness],
[Chroma],[Sharpness],and[HDRRange]andrecoverthevalues(anchor
pointsetting).
[OK]:Performsanchorpointsetting.
[Cancel]:Returnstothepreviousscreenwithoutsettinganchorpoint.
Reset OK
Cancel
Return[PictureMode]tofactorydefault.Notethatin[User1–7]mode
whereyouareperformingcalibration,thesettingreturnstothevalueafter
calibrationinsteadofthefactorydefault.
Whenselected,themessage[ResetAdjustmentsettingstodefaults?]
appears.
[OK]:Performsreset.
[Cancel]:Returnstothepreviousscreenwithoutresetting.
OSD Menu
34
1
[ACESproxy(ver.1.0.1)]cannotbesetwhen[ChannelSettings] [PictureMode] [Type]are[L/R],[4K/2K]or[Automatic].
2
When[ChannelSettings] [PictureMode] [Type]is[L/R],[Contrast]cannotbeadjustedatthe[PictureMode]settingfortherightscreen.The
rightscreen'ssettingwillbethesameassetfortheleftscreen.
3
Canonlybeadjustedwhen[CDL/UserLUT]is[CDL1-8]or[Off].
4
When[ChannelSettings] [PictureMode] [Type]is[L/R],[BacklightControl]cannotbesetatthe[PictureMode]settingfortherightscreen.
Therightscreen'ssettingwillbethesameassetfortheleftscreen.
5
• [Custom(xy)]and[GainR/G/B]or[BiasR/G/B]cannotbeselectedatthesametime.
 • When[GainR/G/B]or[BiasR/G/B]valueisadjusted,anasterisk[*]isdisplayedbycolortemperaturepresetmode.
 • Thedisplayedcolorcoordinates(x,y)arejustaguideandnotguaranteedabsolutevalues.
6
• [ColorGamut]cannotbesetinthefollowingcases.
-
When[CDL/UserLUT] [ARRI(Rec2100-PQ-1K-100)],[ARRI(Rec2100-HLG-1K-200)],[VARICAM(V-LogtoV-709)],[2020PQto2020
SDR],[2020PQto709SDR],[2020HLGto709HLG]or[2020HLGto709SDR]isselected.
 • ForcheckingthevideocapturedwithCinemaEOScameras,pleaserefertothe"ParameterofCinemaEOScamerasandCanondisplays
(
67)".
OSD Menu
35
7
• Notsettableinthefollowingcases:
-
When[ACESproxy(ver.1.0.1)]isselectedin[PictureMode]
-
When[CDL/UserLUT] [ARRI(Rec2100-PQ-1K-100)],[ARRI(Rec2100-HLG-1K-200)],[VARICAM(V-LogtoV-709)],[2020PQto2020
SDR],[2020PQto709SDR],[2020HLGto709SDR]isselected.
 • ForcheckingthecapturedvideowithCinemaEOScamerasandARRI/Panasoniccinemacameras,pleasereferto[CameraLink] [Automatic
Adjustment](
63).
 • Therelationshipbetween[ColorGamut]and[Gamma/EOTF]thatcanbeselectedisshownbelow.When[ColorGamut]ischanged,[Gamma/
EOTF]ischangedtotheunderlinedvalue(defaultvalue)whenthecurrent[Gamma/EOTF]settingsarenotselectable.
PictureMode ColorGamut SelectableGamma/EOTF
SMPTE-C Cannotbeselected Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,
CanonLog(HDR),GammaLUT1toGammaLUT8
EBU Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,
CanonLog(HDR),GammaLUT1toGammaLUT8
ITU-RBT.709,
ITU-RBT.2020
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,
HybridLog-GammaRGB,CanonLog,CanonLog(HDR),CanonLog2,
CanonLog2(HDR),CanonLog3,CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR),
GammaLUT1toGammaLUT8
AdobeRGB Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8
DCI-P3 Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,
CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR),
S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8
CINEMAEOS
SYSTEM,
User1-7
SMPTE-C Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,
CanonLog(HDR),GammaLUT1toGammaLUT8
EBU Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,
CanonLog(HDR),GammaLUT1toGammaLUT8
ITU-RBT.709,
ITU-RBT.2020
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,
HybridLog-GammaRGB,CanonLog,CanonLog(HDR),CanonLog2,
CanonLog2(HDR),CanonLog3,CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR),
GammaLUT1toGammaLUT8
AdobeRGB Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8
DCI-P3 Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,
CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR),
S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8
Native Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),GammaLUT1to
GammaLUT8
CinemaGamutto709,
CinemaGamutto2020
2.2,CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,
CanonLog3(HDR)
CinemaGamuttoDCI CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,Canon
Log3(HDR)
DCI-P3+to709,
DCI-P3+toDCI
CanonLog,CanonLog(HDR)
S-Gamut3to709
S-Gamut3to2020
S-Gamut3.Cineto709
S-Gamut3.Cineto2020
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,
HybridLog-GammaRGB,S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT
8
S-Gamut3toDCI
S-Gamut3.CinetoDCI
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),S-Log2(HDR),
S-Log3(HDR),GammaLUT1toGammaLUT8
GamutLUT1to
GamutLUT8
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8
OSD Menu
36
8
• Settingisdisabledwhen[ACESproxy(ver.1.0.1)]isselectedfor[PictureMode].
 • Operationswhen[Automatic]isselectedaredescribedbelow.
-
ItissetinaccordancewiththesettingsifColorRangesettingsareincludedinthecamerametadata.Whenthereis[FullRange]metadatain
PayloadwhenSDIisselected,itwillbesetto[SDIFull].
-
WhenHDMIisselected,[Full]or[Limited]issetautomaticallydependingonHDMIsignalinformation.
-
WhenSDIisselected,thesettingisconguredaccordingtothesettingsfor[PictureMode],[ColorGamut],and[Gamma/EOTF].
SettingOptions ColorRangetobeSet
PictureMode DCI-P3
Full
ColorGamut
DCI-P3
CinemaGamuttoDCI
DCI-P3+toDCI
Gamma/EOTF
CanonLog(HDR)
CanonLog2(HDR)
CanonLog3(HDR)
S-Log2(HDR)
S-Log3(HDR)
Otherthantheabove Limited
 • Operationswhen[Format]issetto[ICtCp]aredescribedbelow.
-
When[ColorRange]issettootherthan[Full],[WaveFormMonitor]willdisplayonlyasignalsetwith[ColorRange].
-
If[ChannelSettings] [PictureMode] [Type]is[L/R],therightscreen's[ColorRange]settingforthefollowingwillbethesameassetfor
theleftscreen:
-Whendisplayingasingleterminal’sinputinfull-screen
-Whendisplaying“2SampleInterleave”or“DualLink3G-SDI”signals
9
• Whenasettingotherthan[CDL1-8]isselected,thefollowingfunctionscannotbeset.
-
[Power],[Saturation],[Offset],[Slope],[DetailSettings],[AnchorCDL],[ResetCDL].
 • When[ARRI(Rec2100-PQ-1K-100)]isselected,[HDRRange] [SMPTEST2084(PQ)]settingsbecome[1000].
 • When[ARRI(Rec2100-HLG-1K-200)]isselected,[HDRRange] [HybridLog-Gamma]settingsbecome[1000].
 • Dependingonthe[UserLUT]settings,[ColorGamut]and[Gamma/EOTF]willbethesameassetbelow.
UserLUT ColorGamut Gamma/EOTF
ARRI(Rec2100-PQ-1K-100) ITU-RBT.2020 SMPTEST2084(PQ)
ARRI(Rec2100-HLG-1K-200) ITU-RBT.2020 HybridLog-Gamma
VARICAM(V-LogtoV-709) ITU-RBT.709 2.2
2020PQto2020SDR ITU-RBT.2020
2.4
2020PQto709SDR ITU-RBT.709
2020HLGto709HLG ITU-RBT.709 –
2020HLGto709SDR ITU-RBT.709 2.4
 • [CDL/UserLUTBypass]:Fixedat[Off]when[PictureFunctionSettings]
[CompareView] [Enable]issetto[On].
10
• SD-SDIsignalisxedto[Non-constantLuminance].
 • If[ChannelSettings]
[PictureMode] [Type]is[L/R],[2020ConstantLuminance]isxedat[Non-constantLuminance]forthefollowing.
However,if[ColorGamut]fortheleftandrightscreensis[ITU-RBT.2020],thentherightscreen'ssettingwillbethesameassetfortheleft
screen.
-
Whendisplayingasingleterminal’sinputinfull-screen
-
Whendisplaying“2SampleInterleave”or“DualLink3G-SDI”signals
11
• Cannotbesetwhen[PictureMode]isselectedintherightscreen.
 • Whenthe[Contrast]settingfortheleftscreenisspeciedas[1000]orless,theluminanceoftheleftandrightscreensisthesame.
OSD Menu
37
12
• ParameterofHDMImetadataandVideoDisplay
HDMImetadata Videodisplaysetting
ColorGamut
BT.709 ITU-RBT.709
BT.2020 ITU-RBT.2020
Gamma/EOTF
TraditionalSDR 2.2
PQ PQ
HybridLog-Gamma HybridLog-Gamma
 • Cannotset[HDMILink]when[ChannelSettings]
[PictureMode] [Type]is[L/R].
13
In[PictureMode]otherthan[User1–7],theresultsofcalibrationperformedatthefactoryarecopied.
OSD Menu
38
■
Details of the factory default settings for each [Picture Mode]
Item SMPTE-C EBU
ITU-R
BT.709
ITU-R
BT.2020
Adobe
RGB
DCI-P3
Contrast 1000 1000 1000 1000 1000 480
Brightness 0 0 0 0 0 0
Chroma 1000 1000 1000 1000 1000 1000
Sharpness 0 0 0 0 0 0
BacklightControl LocalDimming
Low
LocalDimming
Low
LocalDimming
Low
LocalDimming
Low
LocalDimming
Low
LocalDimming
Low
Color
Temperature
Preset D65 D65 D65 D65 D65 DCI-P3
x 0.313 0.313 0.313 0.313 0.313 0.314
y 0.329 0.329 0.329 0.329 0.329 0.351
GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)
BiasR/G/B 0 0 0 0 0 0
ColorGamut SMPTE-C EBU ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3
Gamma/EOTF 2.2 2.35 2.2 2.2 2.2 2.6
ColorRange Automatic Automatic Automatic Automatic Automatic Automatic
InputTransform – – – – – –
OutputTransform – – – – – –
OutputTransform
Surround
– – – – – –
CDL/UserLUT Off Off Off Off Off Off
YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic Automatic
2020ConstantLuminance Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
2020GamutMapping Clipping Clipping Clipping Clipping Clipping Clipping
HybridLog-Gamma
System
– Manual(when[HybridLog-
Gamma]:1.200;
when[HybridLog-Gamma
RGB]:
γ
1.2-1000cd/m
2
)
–
HDR/SDRView Off Off Off Off Off Off
HDMILink Off Off Off Off Off Off
PictureModeName – – – – – –
OSD Menu
39
Item User 1 User 2 User 3 User 4
User 5 to
User 7
Contrast 20000 10000 20000 20000 1000
Brightness 0 0 0 0 0
Chroma 1000 1000 1000 1000 1000
Sharpness 0 0 0 0 0
BacklightControl LocalDimming
Automatic
LocalDimming
Automatic
LocalDimming
Automatic
LocalDimming
Automatic
LocalDimming
Low
Color
Temperature
Preset D65 D65 DCI-P3 D65 D65
x 0.313 0.313 0.314 0.313 0.313
y 0.329 0.329 0.351 0.329 0.329
GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)
BiasR/G/B 0 0 0 0 0
ColorGamut ITU-RBT.2020 ITU-RBT.2020 DCI-P3 DCI-P3 ITU-RBT.709
Gamma/EOTF SMPTEST
2084(PQ)
HybridLog-
Gamma
SMPTEST
2084(PQ)
SMPTEST
2084(PQ)
2.2
ColorRange Automatic Automatic Automatic Automatic Automatic
InputTransform – – – – –
OutputTransform – – – – –
OutputTransform
Surround
– – – – –
CDL/UserLUT Off Off Off Off Off
YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic
2020ConstantLuminance Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
Non-constant
Luminance
2020GamutMapping Clipping Clipping Clipping Clipping Clipping
HybridLog-Gamma
System
Manual(when[HybridLog-Gamma]:1.200;
when[HybridLog-GammaRGB]:
γ
1.2-1000cd/m
2
)
HDR/SDRView On On On Off Off
HDMILink Off Off Off Off Off
PictureModeName User1
(2020PQ)
User2
(2020HLG)
User3
(DCIPQ)
User4
(DCIPQD65)
User5to
User7
OSD Menu
40
Item CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1)
Contrast 20000 480
Brightness 0 0
Chroma 1000 1000
Sharpness 0 0
BacklightControl LocalDimmingAutomatic LocalDimmingLow
Color
Temperature
Preset D65 D60
x 0.313 0.322
y 0.329 0.338
GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)
BiasR/G/B 0 0
ColorGamut ITU-RBT.2020 –
Gamma/EOTF CanonLog2(HDR) –
ColorRange Automatic –
InputTransform – Automatic
OutputTransform – DCI-P3
OutputTransform
Surround
– DarkSurround
CDL/UserLUT Off Off
YCbCrColorMatrix Automatic Automatic
2020ConstantLuminance Non-constantLuminance Non-constantLuminance
2020GamutMapping Clipping Clipping
HybridLog-Gamma
System
Manual(when[HybridLog-
Gamma]:1.200;
when[HybridLog-GammaRGB]:
γ
1.2-1000cd/m
2
)
–
HDR/SDRView Off Off
HDMILink Off Off
PictureModeName – –
OSD Menu
41
Channel Settings
Thismenuisusedforinputrelatedsettings.Selectthe[SelectChannel]andchooseachannelnumberfromCH1to
CH20.Finallydenetheparameterofeachofthe[ChannelSettings].
"SupportedSignalFormat"( 83)
Sub Menu Setting Options
SelectChannel
1
CH1toCH20 Displaythechannelnumber.Inaddition,youcanassigneachcontentof
[ChannelSettings]toeachchannel(
15).
InputConguration 12-3G/HD-SDI
3G-SDIRAW
SD-SDI
HDMI
—(Notset)
Selecttheinput.Factorydefaultdependonthechannel(
16).
SelectInputSignal
2
Automatic
QuadInput
DualInputA,B
DualInputC,D
SingleInputA
SingleInputB
SingleInputC
SingleInputD
Setsthesignaldisplaymethod.
[Automatic]:Thedisplaymethodisautomaticallydeterminedtomatchthe
inputsignal.
[QuadInput]:Fourinputsignals(InputAtoInputDterminals)are
displayed.
[DualInputA,B]:Twoinputsignals(InputAterminalandInputBterminal)
aredisplayed.
[DualInputC,D]:Twoinputsignals(InputCterminalandInputDterminal)
aredisplayed.
[SingleInputA],[SingleInputB],[SingleInputC],[SingleInputD]:One
inputsignal(anyofInputAtoInputD)isdisplayed.
ImageDivision
3
When[InputConguration] [12-3G/HD-SDI]
Setsthedisplaymethodwhenusingeither[QuadInput]or[DualInput].Twodivisionmethods
"SquareDivision"and"2SampleInterleave"aresupportedfor4Kvideosignals.
Automatic
SquareDivision
2SampleInterleave
[SelectInputSignal]
When[QuadInput]
MultiView(Quad)
When[DualInput]
DualLink3G-SDI
MultiView(Dual)
[Automatic]:Automaticallydeterminedbasedonpayloadanddisplayed.
[SquareDivision]:Displaysasignaltransmittedoverfourinputsasasingle
image.
[2SampleInterleave]:Displaysasignaltransmitteddividedintoa2K/HD
signalasasingleimage.
[MultiView(Quad)]:Eachoftheimagesfromthefourinputsareshownin
fourscreens.
[DualLink3G-SDI]:DisplaysaDualLink3G-SDIsignalasasingleimage.
[MultiView(Dual)]:Eachoftheimages(InputsA/BorInputsC/D)fromthe
twoinputsareshownintwoscreens.
SelectInputSignal:QuadInput,ImageDivision:SquareDivision
OSD Menu
42
Sub Menu Setting Options
LinkOrder Automatic
Off
Automaticallydetectsanddisplayscorrectterminalorderbasedon
payloadwhenusing[2SampleInterleave]or[DualLink3G-SDI].
Format
4
SDISignal
Automatic
4:2:2YCbCr10-bit
4:2:2YCbCr12-bit
4:4:4YCbCr10-bit
4:4:4YCbCr12-bit
4:2:2ICtCp10-bit
4:2:2ICtCp12-bit
4:4:4ICtCp10-bit
4:4:4ICtCp12-bit
4:4:4RGB10-bit
4:4:4RGB12-bit
4:4:4XYZ10-bit
4:4:4XYZ12-bit
HDMISignal
Automatic
4:4:4XYZ12/10-bit
Setsthecolorformatandgradation.
[Automatic]:Setsautomaticallytomatchtheinputsignal.
AudioInput
5
[SelectInputSignal]
When[QuadInput]
Automatic,InputA,
InputB,InputC,InputD
When[DualInputA,B]
Automatic,InputA,
InputB
When[DualInputC,D]
Automatic,InputC,
InputD
Setstheaudioterminal.
[Automatic]:Setsautomaticallytomatchtheinputsignal.
Marker/TC/CameraInfo
Input
6
[SelectInputSignal]
When[Automatic]or
[QuadInput]
InputA,InputB,InputC,
InputD
When[DualInputA,B]
InputA,InputB
When[DualInputC,D]
InputC,InputD
Setthetargetterminalsothatvariousmarkers(exceptGridMarker),Time
Code,andCameraInformationaredisplayed.(CameraInformationis
availableinthe[MultiView(Quad)]displayonly)
OSD Menu
43
Sub Menu Setting Options
InternalSync On,Off
When[ImageDivision] [SquareDivision]
Setswhethertosynchronizefourinputs.
[On]:Forcesynchronization.
[Off]:Donotforcesynchronization.
ChannelName Setsthenameoftheselectedchannel.Youcaninputupto16
alphanumericcharacters.
PictureMode
7
Set[PictureMode]byindividualchannel.
Type Normal
L/R
4K/2K
Automatic
[Normal]:Setsone[PictureMode].
[L/R]:Sets[PictureMode]byindividualleftandrightscreen.Displaysas
[SingleInputDualView]whenusingresolutionsof2Korlower.
[4K/2K]:Sets[PictureMode]byindividual4Kor2Ksignalscreen.
[Automatic]:[PictureMode]issetaccordingtotheSDIsignal.Theset
[PictureMode]ischangedtointheordercamerametadata
→
Payload
→
resolution(4K/2K).
[Type]
When[Normal]
PictureMode
When[L/R]
PictureModeL
PictureModeR
When[4K/2K]
Resolution4K,2K
When[Automatic]
Resolution4K,2K
Payload
UHD/PQ,
UHD/HLG,UHD,
709/PQ,
709/HLG,709,
VANC,Unknown
Camera
CINEMAEOS
SYSTEM,
ARRI,VARICAM
SMPTE-C
EBU
ITU-RBT.709
ITU-RBT.2020
AdobeRGB
DCI-P3
User1(2020PQ)
User2(2020HLG)
User3(DCIPQ)
User4(DCIPQD65)
User5~User7
CINEMAEOSSYSTEM
ACESproxy(ver.1.0.1)
—(Notset)
Setthe[PictureMode]foreachscreen.
[ACESproxy(ver.1.0.1)]:Canbesetwhen[Type]is[Normal].
[—](Notset):Cannotautomaticallychangeimagequalitytosuitinput
signal.Canbesetwhenotherthan[Resolution4K]and[Resolution
2K]areselectedin[Type]
[Automatic].
• ColorimetryBit/TransferCharacteristicsoftheSDIPayloadIDsupports
thesignalinconformitywiththefollowingstandard.
SMPTEST2082-10:2018(12G-SDI)
SMPTEST2081-10:2018(6G-SDI)
SMPTEST425-1:2017(3G-SDISingleLink/SquareDivision)
SMPTEST425-3:2019(3G-SDIDualLink(2SI))
SMPTEST425-5:2019(3G-SDIQuadLink(2SI))
SMPTEST292-1:2018(HD-SDI)
OSD Menu
44
Sub Menu Setting Options
SingleInputDualView
8
Automatic,Off
Whenotherthan[ImageDivision] [MultiView(Quad)]or[MultiView(Dual)]
Theimagefromtheinputsignalcanbereducedandshownin
dual-screen.
[Automatic]:When[PictureMode] [Type]is[L/R],orwhenthe[Picture
FunctionSettings]SubMenuitemsaresetto[On],identicalimages
areautomaticallyshownanddual-screencomparisoncanbemade.
4Kimagesareshowninreducedsize.
Relevant[PictureFunctionSettings]SubMenuitems:
[Peaking],[FalseColor],[OverRange],[2020OutsideofGamutView],
[Monochrome],[BlueOnly],[RedOff],[GreenOff],[BlueOff],and
[CompareView]
Separator White
Half
Black
Off
Inthefollowingcases,screenborderswillbedisplayed.
-
When[PictureMode] [Type]is[L/R]
-
When[MultiView(Quad)]or[MultiView(Dual)]isselected
-
When[SingleInputDualView]issetto[Automatic]andtheimagesare
shownnexttoeachotherforimagecomparison
-
When[PictureFunctionSettings] [CompareView] [Enable]is[On]
1
Itmaytake5secondswhenswitchingchannels.
2
Settingsthatcanbesetdifferaccordingtotheinputsignal.
-
[SD-SDI]:Only[SingleInputA]to[SingleInputD]canbeselected.
-
[HDMI]:Thisisxedto[Automatic].
3
• Thecombinationsofvideosignalformatsthatcanbedisplayedwhenusingtwoscreensorfourscreensin[MultiView(Quad)]or[MultiView(Dual)]
areasfollows:
-
Resolutioncombinations:Same,or“4096x2160,2048x1080”,“3840x2160,1920x1080”
-
WhenusingaframerateandI/P/PsFcombinationthatisoneof“23.98P/24P/25P/29.97P/30P”
"I(All)/PsF(All)/47.95P/48P/50P/59.94P/60P"
-
(Quadscreendisplayonly)Forbothleftandright,whenthetopandbottomscreenvideosignalframeratesandI/P/PsFarethesame
 • TheremaybeperiodicaldeteriorationintheimagewheninputtingsignalswithdifferingframeratesorI/P/PsF.
4
• TheHD-SDIsignaliseither[4:2:2YCbCr10-bit]or[4:2:2ICtCp10-bit].
 • [SD-SDI]isxedto[4:2:2YCbCr10-bit].
 • For[3G-SDIRAW],thesettingisxedto[Automatic].
 • If[Automatic]isselected,theyarerenderedinaPayloadthatisselectedintheorderA
→
B
→
C
→
D.
 • ThesettingsforcorrectlydisplayingICtCpformatsignalsareasfollows.
-
[PictureMode]:[ITU-RBT.709]or[ITU-RBT.2020]
-
[ColorGamut]:[ITU-RBT.709]or[ITU-RBT.2020]
-
[Gamma/EOTF]:[SMPTEST2084(PQ)],[HybridLog-Gamma]or[HybridLog-GammaRGB]
 • IfyouneedtousetheICtCpformatforSDIsignals,selectanyofthefollowingtomatchthesignal:[4:2:2ICtCp10-bit],[4:2:2ICtCp12-bit],[4:4:4
ICtCp10-bit],[4:4:4ICtCp12-bit]
 • Touse4:4:4XYZ10-bitforSDIsignals,select[4:4:4XYZ10-bit].Then,signalswillbeprocessedassignalswhereXYZdataisincludedinRGB
dataoutputin4:4:4RGB10-bitformat.
5
For[SelectInputSignal] [Automatic]or[SingleInput],itisxedat[Automatic].
6
Thissettingbecomesinvalidexceptforthe[MultiView(Quad)]or[MultiView(Dual)]display.
OSD Menu
45
7
• Settingsthatcanbesetdifferaccordingtotheinputsignal.
-
[SD-SDI]:[Type]isxedto[Normal].[Automatic]cannotbeset.
-
[3G-SDIRAW]and[HDMI]:[Automatic]and[4K/2K]cannotbesetin[Type].
 • When[Type]is[L/R]
-
Settingthesame[PictureMode]forbothleftandrightscreenswillcause[PictureMode]inthenon-selectedscreentochangetoadifferent
mode(forexample,the[PictureMode]settingsoftheleftandrightscreensareswitched).
-
Whenusingasignal2Korunder,itisxedat[SingleInputDualView].
8
Cannotbeusedwhenanunsupportedvideosignalisinput.
OSD Menu
46
Display Settings
Thismenuisusedtocongurethedisplaymethod.
Sub Menu Setting Options (Bold: factory default)
ScreenScaling
1
NativeInputResolution
200%
Automatic
Deneshowthevideoisscaledanddisplayedonthescreen.
[NativeInputResolution]:Displaystheinputsignalwithoutscaling.
1920x1080(original)
[200%]:Doublestheverticalandhorizontaldimensions.
1920x1080
→
3840x2160
[Automatic]:Enlargestofullscreen.
1920x1080
→
3840x2160
Anamorphic
2
x2.0
x1.8
x1.5
x1.33
Off
Setwhencheckingimagesphotographedusingananamorphiclens.
Displayedinaccordancewiththesetmagnication.
OSD Menu
47
Sub Menu Setting Options (Bold: factory default)
ScalingMethod Shape Trace
Bicubic
NearestNeighbor
Setstheinterpolationmethodwhen[ScreenScaling]issetto[200%]or
[Automatic].
[ShapeTrace]:Canonoriginalprocessingthatproducessmoothslopes
withreducedjaggedlines.
[Bicubic]:Generalinterpolationprocessthatusesneighboringpixel
informationtocreateinterpolatedpixels.
[NearestNeighbor]:Processthatusesnearestneighborpixelinformation
tocreate(copy)newpixels.Thisisusefulasitenlargestheoriginal
pixels,thusmakinganyjaggedlinesvisible.
VideoPosition
(MultiView)
Top
Middle
Center
Whenusing[MultiView(Quad)],[MultiView(Dual)],or[SingleInputDual
View]
Setstheverticaldisplaypositionfortheimage.
[Top]:Displaysatthetopofthescreen.
[Middle]:Displaysatthetopmiddleofthescreen.
[Center]:Displaysatthemiddleofthescreen.
Zoom
3
Enlargespartofthevideoimage.Thezoomfunctioncanbeusedwhentheresolutionis[4096x2160],
[3840x2160],[2048x1080]or[1920x1080].
ZoomPreset Zoom1
Zoom2
Zoom3
Off
Setsthezoomdisplaymethod.Therearethreepresets.
Magnication x2
x4
x8
Setsthedisplayscaleofzoom.
Position Thezoomadjustmentscreenisdisplayed.Usethejogdialtoadjustthe
displayposition.
Type Normal
SingleInputDualView
Setstheenlargedimagedisplaymethod.
[Normal]:Onlydisplaystheenlargedimage.
[SingleInputDualView]:Displaystheoverallimageontheleftandthe
enlargedimageontheright.
OSD Menu
48
Sub Menu Setting Options (Bold: factory default)
Frame Hold
4
On, Off Pauses the video.
Background Color
5
White
Gray
Off
Sets the color of the black band to check the boundary of the black band
and video image.
I/PsF Automatic
Interlace
PsF
Defines how the interlace signal or PsF signal is displayed.
[Automatic]: Automatically determined based on payload and displayed. If
there is no payload, the signal is displayed as an interlace signal.
[Interlace]: Displayed as an interlace signal.
[PsF]: Displayed as a PsF signal.
PsF Progressive
Interlace
Defines how the PsF signal is displayed.
[Progressive]: Interpolates giving preference to image quality by detecting
paired fields.
[Interlace]: Interpolates using two adjacent fields giving priority to speed.
I/P Conversion Image Priority
Speed Priority
Sets the interlaced signal I/P conversion method.
[Image Priority]: This mode gives priority to image quality. Processing time
will be longer than [Speed Priority].
[Speed Priority]: This mode gives priority to speed.
Film Cadence
6
2-2
2-3
2-3-3-2
Off
Sets the film cadence mode.
[2-2]: Displays progressive image after conversion for 2-2 pulldown
processed interlaced signal input.
[2-3]: Displays progressive image after conversion for 2-3 pulldown
processed interlaced signal input.
[2-3-3-2]: Displays progressive image after conversion for 2-3-3-2
pulldown processed interlaced signal input.
[Off]: Does not perform film cadence mode progressive conversion.
1
In the following cases, the maximum magnification is 200% even if [Automatic] is selected.
-
When [Peaking], [False Color] or [Over Range] is [On]
2
Settings are invalid in the following cases:
-
When [Peaking], [False Color] or [Over Range] is set to [On]
3
• Thezoomfunctioncannotbeusedinthefollowingcases:
-
During execution of [Playback File] under [Screen Capture]
-
During display of the test pattern
-
When [Multi View (Quad)] or [Multi View (Dual)] is selected
-
When [Channel Settings] [Picture Mode] [Type] is set to [L/R]
-
When [Picture Function Settings] [Compare View] [Enable] is set to [On]
 • Whilethezoomfunctionisinuse,thefollowingarenotdisplayed:
Background Color, Various markers
 • Whenzoomsettingsarechanged,[FrameHold]turns[Off].
 • When[Type] [Normal] is selected: When the resolution is [2048x1080] or [1920x1080], the display position cannot be changed even if
[Magnification] is set to [x2].
 • When[Type] [Single Input Dual View] is selected: For 4K video (3840x2160 or 4096x2160), the quality of the enlarged image will be degraded
compared to [Normal].
OSD Menu
49
4
• Settingisdisabledwhen[Peaking]issetto[On].
 • Iftheimagequalitysettingischangedwhilethevideoispaused,thesettingmaynotchangecorrectly.
5
Setting is disabled when [Multi View (Quad)] or [Multi View (Dual)] is selected.
6
• Thiscanbesetonlywhen[I/PConversion]issetto[ImagePriority].
 • Cannotbesetinthe[MultiView(Quad)]or[MultiView(Dual)]display.Thesettingisxedto[Off].
OSD Menu
50
Audio Settings
Thismenuisusedtosetaudiooutputfromtheheadphoneterminal.
Sub Menu Setting Options (Bold: factory default)
SDIGroup CH1-CH8
CH9-CH16
SwitchestheaudiogrouptobeinputduringSDIaudioinput.
CHL(SDI)
[SDIGroup]
When[CH1-CH8]
CH1toCH8(CH1)
When[CH9-CH16]
CH9toCH16(CH9)
Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphone
respectively.Theoptionsdifferaccordingtothe[SDIGroup]setting.
CHR(SDI)
[SDIGroup]
When[CH1-CH8]
CH1toCH8(CH2)
When[CH9-CH16]
CH9toCH16(CH10)
CHL(HDMI) CH1toCH8(CH1) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphone
respectively.
CHR(HDMI) CH1toCH8(CH2)
Volume 0to100(30) Setsthevolume.(Incrementsof1)
AudioSwitch L R
L
R
MIX(L+R)
Setsthestereooutput.
OSD Menu
51
Marker Settings
Thismenuisusedtocongurevariousmarkers.
Sub Menu Setting Options (Bold: factory default)
MarkerPreset Marker 1to5
Off
Customizesmarkerswhichareassignedtomarkers1to5.
AspectMarker
1
[AspectMarker]displaysarangeinaccordancewiththespeciedaspectratio.
Enable On,Off SwitchestheaspectmarkerOn,Off.
Mask Black
Half
Off
Switchesthemaskcolor.Maskistheblankingareaoutsidetherangeof
themarker.
[Black]:
[Half](50%gray):
[Off]:Turnsmaskoff.
AspectRatio 16:9,15:9,14:9,13:9,
4:3,2.39:1,2.35:1,
1.896:1,1.85:1,1.66:1,
Variable
• WhenVariableis
selected
1.00:1to3.00:1
(1.78:1)
Setstheaspectratiooftheaspectmarker.
Theaspectratiocanbeenteredasanumericvaluewhenyouselect
[Variable](0.01:1increments).Thegrayedoutsliderbecomesactiveand
canbeusedtosettheaspectratio.
Line On,Off
When[Mask] [Black]or[Half]
SwitcheslinesonmaskOn,Off.
LineWidth Thick
Normal
Thin
Setsthethicknessoftheaspectmarkerline.
OSD Menu
52
Sub Menu Setting Options (Bold: factory default)
LineColor White,Red,Green,
Blue,Yellow,Cyan,
Magenta,Gray
Setsthecoloroftheaspectmarkerline.
LineBrightness High,Low,Half Setsthebrightnessoftheaspectmarkerline.
HPosition -65to65(0) Changeshorizontalpositionwithoutchangingtheaspect.
VPosition -35to35(0) Changesverticalpositionwithoutchangingtheaspect.
SafetyZoneMarker1,2
1
Therearetwotypesof[SafetyZoneMarker]:1and2,whichsharethesamesettings.Asafetyzone
markerisusedtosetthesafezoneoftheimage(actualdisplayedarea)tochecktheimage.
Enable On,Off SwitchesthesafetyzonemarkerOn,Off.
AspectRatio
2
16:9,15:9,14:9,13:9,
4:3,2.39:1,2.35:1,
1.896:1,1.85:1,1.66:1,
Variable
• WhenVariableis
selected
1.00:1to3.00:1
(1.78:1)
Setstheaspectratioofthesafetyzonemarker.
[Variable]:Theaspectratiocanbeenteredasanumericvalue(0.01:1
increments).Thegrayedoutsliderbecomesactiveandcanbeused
tosettheaspectratio.
AreaSize 80%,88%,90%,93%,
Variable(%),
Variable(dot)
Setsthesafetyzonemarkerareasize.
[Variable(%)]:Thegrayedout[Rate(%)]becomesactive.
[Variable(dot)]:Thegrayedout[Width(dot)]and[Height(dot)]become
active.
Rate(%) 50to100(80)
When[AreaSize] [Variable(%)]
Movetheslidertosetthedisplayedmarkerareasizewithoutchangingthe
aspectratioin1%increments.
Width(dot) 360to4096(3276)
When[AreaSize] [Variable(dot)]
Movetheslidertosettheareawidthin2dotincrement.
Height(dot) 240to2160(1728)
When[AreaSize] [Variable(dot)]
Movetheslidertosettheareaheightin2dotincrement.
OSD Menu
53
Sub Menu Setting Options (Bold: factory default)
Shape Box
Brackets
Enclosure
Setstheareashapeofthesafetyzonemarker.
[Box]:
[Brackets]:
[Enclosure]:
LineWidth Thick
Normal
Thin
Setsthewidthofthesafetyzonemarkerline.
LineColor White,Red,Green,
Blue,Yellow,Cyan,
Magenta,Gray
Setsthecolorofthesafetyzonemarkerline.
LineBrightness High,Low,Half Setsthebrightnessofthesafetyzonemarkerline.
HPosition -65to65(0) Adjuststhemarkerhorizontalpositionwiththesetaspectandsize.
VPosition -35to35(0) Adjuststhemarkerverticalpositionwiththesetaspectandsize.
OSD Menu
54
Sub Menu Setting Options (Bold: factory default)
AreaMarker
1
[AreaMarker]isusedtocheckaspecicareausingarectangularbox.
Enable On,Off SwitchestheareamarkerOn,Off.
HPosition 0to4086(240) Setsthestartposition(x-coordinate)todrawtherectangle.(inincrements
of2)
VPosition 0to2150(120) Setsthestartposition(y-coordinate)todrawtherectangle.(inincrements
of2)
Width(dot) 10to4096(240) Setsthewidthoftherectangle.(inincrementsof2)
Height(dot) 10to2160(120) Setstheheightoftherectangle.(inincrementsof2)
Mask Black
Half
Off
Switchesthemaskcolor(inthemarker).
Line On,Off
When[Mask] [Black]or[Half]
TurnsOn/Offtheoutlinesoftherectangularbox.
LineWidth Thick
Normal
Thin
Setsthewidthoftheareamarkerline.
LineColor White,Red,Green,
Blue,Yellow,Cyan,
Magenta,Gray
Setsthecoloroftheareamarkerline.
LineBrightness High,Low,Half Setsthebrightnessoftheareamarkerline.
CenterMarker
3
[CenterMarker]showsthecenteroftheimage.
Enable On,Off SwitchesthecentermarkerOn,Off.
Size Large
Middle
Small
Setsthesizeofthecentermarker.
LineWidth Thick
Normal
Thin
Setsthewidthofthecentermarkerline.
LineColor White,Red,Green,
Blue,Yellow,Cyan,
Magenta,Gray
Setsthecolorofthecentermarkerline.
LineBrightness High,Low,Half Setsthebrightnessofthecentermarkerline.
OSD Menu
55
Sub Menu Setting Options (Bold: factory default)
GridMarker
3
[GridMarker]ismarkerusedtocheckthehorizontalandverticalposition.
Enable On,Off SwitchesthegridmarkerOn,Off.
Distance 160 dots
240dots
320dots
Setsthehorizontalandverticallinedistance.
LineWidth Thick
Normal
Thin
Setsthewidthofthegridmarkerline.
LineColor White,Red,Green,
Blue,Yellow,Cyan,
Magenta,Gray
Setsthecolorofthegridmarkerline.
LineBrightness High,Low,Half Setsthebrightnessofthegridmarkerline.
1
Themarkerisnotdisplayedinthefollowingcases:
-
Whenthereisnosignal,unsupportedsignal,orachannelwith[InputConguration]notsetisselected
-
Whenanenlargedimageisdisplayed
-
Duringtheexecutionof[PlaybackFile]under[ScreenCapture]
-
Whena[TestPattern]isdisplayed
2
When[AreaSize]issetto[Variable(dot)],youcannotselect[AspectRatio].
3
Themarkerisnotdisplayedinthefollowingcases:
-
Whenanenlargedimageisdisplayed
OSD Menu
56
Function Settings
Thismenuisusedtosettheimagesignalinformationdisplayandthecinemacameralinkfunction.
Sub Menu Setting Options (Bold: factory default)
TimeCode
1,2
Displaythetimecodesuperimposedonthesignal.
VITC 01:23:45.05
Enable On,Off SwitchesthetimecodedisplayOn,Off.
Type VITC
LTC
Selectsthetype.
Size Large
Small
Selectsthesize.
Position
3
TopLeft
TopRight
Bottom Left
BottomRight
Selectsthedisplayposition.
HOffset 0to1460(0) Adjuststhedisplaypositionofthetimecode.
TypeStringDisplay On,Off SetsdisplayofVITC/LTCstrings.
Brightness Normal,Half SetstheBrightnessofthestrings.
AudioLevelMeter
1,4
Conguresvarioussettingsfortheaudiolevelmeter.Displaystheaudioleveloftheselectedchannel
number.
Whenusingdualorquadscreens,setting[ChannelSettings]
[AudioInput]to[Automatic]will
displaymultipleaudiolevelmeters.Youcandisplayuptoeightchannelsonthescreenoverall.
Enable On,Off SwitchestheaudiolevelmeterOn,Off.
ChannelNumber
(SDI)
2CH
4CH
6CH
8CH
8CH(1-4,5-8)
SetsthenumberofchannelsdisplayedwhenSDIsignalisinput.Options
changeaccordingtothesettingfor[SDIGroup]under[AudioSettings].
When[SDIGroup]
[CH1-CH8]
[2CH]:CH1toCH2
[4CH]:CH1toCH4
[6CH]:CH1toCH6
[8CH]:CH1toCH8
When[SDIGroup]
[CH9-CH16]
[2CH]:CH9toCH10
[4CH]:CH9toCH12
[6CH]:CH9toCH14
[8CH]:CH9toCH16
ChannelNumber
(HDMI)
2CH
4CH
6CH
8CH
SetsthenumberofchannelsdisplayedwhenHDMIsignalisinput.
[2CH]:CH1toCH2
[4CH]:CH1toCH4
[6CH]:CH1toCH6
[8CH]:CH1toCH8
Size Large
Middle
Small
Setsthesizeofthedisplay.
OSD Menu
57
Sub Menu Setting Options (Bold: factory default)
PeakHold On,Off Onesecondofaudiosignalatthepeakiskept.
ReferenceLevel -40to0(-20) Setsthereferencelevel.
Brightness Normal
Low
Half
Setsbrightnessfortheaudiolevelmeter.
WaveFormMonitor
1
Conguresvarioussettingsforthewaveformmonitor.Onthewaveformmonitor,thehorizontalaxis
showsthehorizontalresolutionofthevideoandtheverticallineshowsthesignallevel.Totherightof
thewaveformmonitor,[ColorRange]and[HDRRange]information(verticalline)isdisplayed.
1023
-4%
0%
50 %
100 %
0
Signallevel
IRE
Horizontalresolutionofvideo
Enable On,Off SwitchesthewaveformmonitorOn,Off.
SelectSignal Y,Cb,Cr,R,G,B Setsthewaveformtobedisplayed.
DisplayType All
Line
Setsthedisplaytype.
[Line]:Thedataforonelineisdisplayed.
SelectLine 1to2160 Selectsthelinetobedisplayedwhen[Line]isselected.
Scale Automatic
IRE
ST2084(PQ)Full
ST2084(PQ)Limited
HybridLog-Gamma
CanonLog
CanonLog2
CanonLog3
S-Log2
S-Log3
ARRI(Rec2100-PQ-
1K-100)
ARRI(Rec2100-HLG-
1K-200)
Setsthescaleofthewaveformmonitor.
[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]and[Color
Range]settings.
ReferenceLine 4to1023 Aguideisdisplayedatthespeciedposition.[ReferenceLine]isnot
displayedwhen[1023]isselected.
OSD Menu
58
Sub Menu Setting Options (Bold: factory default)
ReferenceLevel Automatic
Manual
Setstherangeofthereferencelevel.Tintstheoutsideoftherangeofthe
referencelevel.
[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]and[Color
Range]settings.
• Inthecaseof[Gamma/EOTF]correspondingtotheHDRrange,parts
thatexceedtheHDRrangearetinted.
• When[ColorRange]
[Limited],outsidethelimitedrangeistinted.
ReferenceLevel
High
468to1023 Setsthereferencedisplaylevel(high).[ReferenceLevelHigh]isnot
displayedwhen[1023]isselected.
ReferenceLevel
Low
0to468 Setsthereferencedisplaylevel(low).[ReferenceLevelLow]isnot
displayedwhen[0]isselected.
Color Setsthesignalstobedisplayedandthecolorofsignalsexceedingthereferencelevel.
Y White
Red
Green
Blue
Yellow
Cyan
Magenta
[Y],[Cb],[Cr],[R],[G],[B]:Selectsthecoloroftheselectedsignal.
Defaultvalueofeachsignalisshownbelow.
Y(White),Cb(White),Cr(White),R(Red),G(Green),B(Blue)
[ReferenceLevelHigh],[ReferenceLevelLow]:Selectsthecolorofthe
signaloftheselectedreferencelevel.
Defaultvalueofeachreferencelevelisshownbelow.
ReferenceLevelHigh(Magenta),ReferenceLevelLow(Cyan)
Cb
Cr
R
G
B
ReferenceLevel
High
ReferenceLevel
Low
Brightness Automatic
Normal
Low
SetstheBrightnessofthewaveformmonitor.
[Automatic]:Brightnessisautomaticallyadjustedaccordingtothecontrast
valueandaverageluminancevalueoftheinputsignal.
Position
3
Bottom Left
BottomRight
Selectsthedisplayposition.
Size Large,Middle,Small Setsthesizeofthedisplay.
VectorScope
1
Conguresvarioussettingsforthevectorscope.Vectorscopedisplaystheintensityofcolorsignals
andhuewiththehorizontalaxisshowingthecolordifferencesignalCbandtheverticallineshowing
Cr.
Red
Green
Yellow
Blue
Cyan
Magenta
(Cb,Cr)=(255,255)
(Cb,Cr)=(0,0)
Cr
Cb
Enable On,Off SwitchesthevectorscopeOn,Off.
OSD Menu
59
Sub Menu Setting Options (Bold: factory default)
Target 75%
100%
75%+100%
Setsthetarget.
Position
3
BottomLeft
Bottom Right
Selectsthedisplayposition.
Size Large,Middle,Small Setsthesizeofthedisplay.
Histogram
1,5
Displaystheluminancedistributionofthevideo.
LuminanceDistribution
SDRRatio
AverageLuminance
PeakLuminance
BeyondHDRrange
HDRRatio
Enable On,Off Switchesbetweendisplayingorhiding[Histogram].
Color Automatic
Normal
FalseColor
[Automatic]:Unless[PictureFunctionSettings]
[FalseColor] [Enable]
issetto[Off],itwillautomaticallyadjustthedisplaytomatchthe[False
Color]settings.
[Normal]:Displaysinmonochrome.
[FalseColor]:When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or
[HybridLog-Gamma],thenitwilladjustthedisplaytomatchthe[False
Color]settings.
When[FalseColor]
[Enable]is[FalseColor1]or[Off]:Matchthe
[FalseColor1]settings.
When[FalseColor]
[Enable]is[FalseColor2]:Matchthe[False
Color2]settings.
Gain x1,x2,x3 Increasesthedisplayedgraphsize.
HDRRange On
On(Clip)
Off
[On]:AreasthatexceedtheHDRrangewillbetinted.
[On(Clip)]:AreasthatexceedtheHDRrangeandareasthatexceedthe
HDRrangeandareclippedwillbetinted.
[Off]:AreasthatexceedtheHDRrangewillnotbetinted.
HDR/SDRRatio On,Off
When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or[HybridLog-
Gamma]
Switchesbetweendisplayingorhiding[HDR/SDRRatio].Theratio
calculationforHDR/SDRusesthe[FalseColor]
[HDR/SDRBorder]
settings.
Peak/Ave.Luminance On,Off
When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or[HybridLog-
Gamma]
Switchesbetweendisplayingorhiding[Peak/Ave.Luminance].
Size Large,Small Setsthesizeofthedisplay.
OSD Menu
60
Sub Menu Setting Options (Bold: factory default)
FrameLuminance
Monitor
1,6
When[Gamma/EOTF] [SMPTEST2084(PQ)]or[HybridLog-Gamma],"Max./Ave.Luminance"
fortheentirescreen(frame)isdisplayed.Forotherconditions,"Max./Ave.GradationValues"
isdisplayed.Theframeluminancemonitorcanbeusedwhentheresolutionis[4096x2160],
[3840x2160],[2048x1080]or[1920x1080].
• Luminancegraph
Currentvalueforpeakluminance
(cumulativemaximumvalue)
Currentvalueforaverageluminance
(cumulativemaximumvalue)
Peakluminance
Average
luminance
Luminance
distributiongraph
• Ratiograph
HDRRatio SDRRatio
Enable On,Off Sets[FrameLuminanceMonitor]onoroff.Obtainstheluminancevalue
whenvalid.
Display All
LuminanceGraph
HDR/SDRRatioGraph
LuminanceValue
Off
Setswhethereachgraphisdisplayed.
[All]:Displays[LuminanceGraph(Includingluminancevalue)]and[HDR/
SDRRatioGraph].
[Luminance Graph]: Displays[Luminance Graph (Includingluminance
value)].
[HDR/SDRRatioGraph]:Displays[HDR/SDRRatioGraph].
[LuminanceValue]:Displaysthepeakandaverageluminancevalues.
[Off]:Doesnotdisplayanygraphs.
OSD Menu
61
Sub Menu Setting Options (Bold: factory default)
LuminanceGraph
Settings
Sets[LuminanceGraph]displaymethod.
Luminance
Distribution
On,Off Switchesbetweendisplayingandnotdisplayingtheluminancedistribution
graph.
Color Automatic
Normal
FalseColor
[Automatic]:Unless[PictureFunctionSettings]
[FalseColor] [Enable]
issetto[Off],itwillautomaticallyadjustthedisplaytomatchthe[False
Color]settings.
[Normal]:Displaysinmonochrome.
[FalseColor]:When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or
[HybridLog-Gamma],thenitwilladjustthedisplaytomatchthe[False
Color]settings.
When[FalseColor]
[Enable]is[FalseColor1]or[Off]:Matchthe
[FalseColor1]settings.
When[FalseColor]
[Enable]is[FalseColor2]:Matchthe[False
Color2]settings.
Reference
LuminanceLevel-
Peak
Automatic
Manual
[Automatic]:Worksinconjunctionwiththe[HDRRange]settingsto
automaticallytinttheareasthatexceedthepeakluminance.
[Manual]:Setstheupperlimitforpeakluminance.
400to10000(1000) Setwhenusing[Manual].Areasthatexceedthesetvaluewillbetinted.
(400to4000:incrementsof100.4000to10000:incrementsof1000)
Ave. 100to1000(400) Areasthatexceedthesetvaluewillbetinted.(incrementsof100)
ReferenceLum.
RiseLevel-Peak
0to1000(400) Setsthereferencevalueforpeakluminanceriselevel.(incrementsof
10cd/m
2
)
Ave. 0to1000(200) Setsthereferencevalueforaverageluminanceriselevel.(incrementsof
10cd/m
2
)
HDR/SDRRatioGraph
Settings
Setsthe[HDR/SDRRatioGraph]displaymethod.TheratiosforHDRandSDRusethe[FalseColor]
[HDR/SDRBorder]settingsaswellasthesettingsforeachrange.
Type HDR/SDR
HDR
[HDR/SDR]:DisplaystheratiobetweentheHDRandSDRareas.
[HDR]:DisplaystheratioofluminanceintheHDRarea.
Scale Automatic,100%,
75%,50%,25%
When[Type] [HDR]
Sets[Scale]oftheluminancevalue.
Size Large,Small Setsthesizeofthedisplay.
Reset Resetsthedisplayedcontent.
Export
Theluminanceinformationobtainedwhen[FrameLuminanceMonitor]isvalid,isexportedtotheUSB
memory.
PixelValueCheck
1,7
When[Gamma/EOTF] [SMPTEST2084(PQ)]or[HybridLog-Gamma]
TheluminanceandRGBvalueofthespeciedpixel(cursor)positionaremeasuredanddisplayed.
Thepixelvaluecheckcanbeusedwhentheresolutionis[4096x2160],[3840x2160],[2048x1080]or
[1920x1080].
Enable On,Off SwitchesthepixelvaluecheckOn,Off.
HPosition 1to4096(960) Setsthepixelposition(horizontal).
VPosition 1to2160(540) Setsthepixelposition(vertical).
ResetPosition Normal
Around Peak
Luminance
SetsoperationwhentheRESETbuttonispressed.
[Normal]:Resetsthevaluetothedefaultvalue.
[AroundPeakLuminance]:Movesclosertotheareaofpeakluminance
insidethedisplayimage.
OSD Menu
62
Sub Menu Setting Options (Bold: factory default)
TestPattern
8
White(1023),
White(940),
Gray,Black(64),
Black(0),Ramp,
ColorBars,
ColorBars(PQFull),
ColorBars(PQLimited),
ColorBars(HLG),
PLUGE,
PLUGE(PQ/HLG),
Off
Setsthetestpatternbuiltintothemainunit.
SignalMonitoring
9
Monitorstheinputsignalstatus.
Control On,Off Setswhether[SignalMonitoring]isusedornot.
ErrorHold On(Notimeout)
On(5sec.)
Off
Setsthelengthoftimefordisplayingerrors,whentheyaredetected.
[On(Notimeout)]:Errorscontinuetobedisplayed.Tohidethedisplayed
error,presstheRESETbuttonwhenclosingtheOSDmenu.
[On(5sec.)]:Thedisplayederrorwilldisappear5secondsaftertheinitial
detection.
[Off]:Onlydisplayserrorsduringtheperiodwhentheyaredetected.The
displayederrormessagewilldisappearoncetheerrorends.
NoSignal/Unsupported
Signal
On,Off Displaysanerrorwhenthereis[NoSignal]or[UnsupportedSignal].
2SILinkOrder On,Off Displaysanerrorwhenthecablesinsertedintotheinputterminalsarein
thewrongorderwhenusingsignalsinputvia[2SampleInterleave].
SDICRCError On,Off DisplaysanerrorwhenanincorrectSDIsignalisdetected(CRCerror).
8K2SIFormat On,Off MonitorstheinputsignalstatusforthefourterminalsusingtheSDIsignal
when[ChannelSettings]
[SelectInputSignal]issetto[Automatic].
8K2SISwitching On,Off Whenthereisno[8K2SIFormat]error,displayswhileswitchingvideo
betweeneachterminal(12G-SDIsignalonly).
ErrorLog Displayserrorhistory.
OSD Menu
63
Sub Menu Setting Options (Bold: factory default)
ScreenCapture Capturesthescreen.
Capture Capturesthescreen.Thedataissavedunderthename"YYYYMMDD_
hhmmss.bmp"or"YYYYMMDD_hhmmss.jpg"intherootfolderofthe
USBmemory.
FrameHold On,Off Pausesthevideo.
CaptureSource All
Video
Selectsthesourcestocapture.
[All]:Everythingiscapturedincludingvideoassistancefunctionssuchas
markersandwaveformmonitoraswellasOSDmenu.
[Video]:Onlyvideosignalsarecaptured.
FileType Bitmap
JPEG
SetstheFileTypeoftheimagetocapture.
CreateHDR/SDR
CompareFile
On,Off CreatesalethatletsyoucomparethebrightnessofHDRandSDR
imagesonacomputer.Whensaving,[_pc]isappendedtothelename.
PlaybackFile
10
SelectFile
Execute
Playsbackcapturedimages.
[SelectFile]:Selectsale.
[Execute]:Playsbacktheimage.
FinishPlaybackFile Finishesplayback.
CameraLink
SetsthefunctionstolinkwithCinemaEOScamerasandARRI/Panasoniccinemacameras.
AutomaticAdjustment
(CINEMAEOS)
When[PictureMode] [CINEMAEOSSYSTEM],[InputConguration] [12-3G/HD-SDI]or
[3G-SDIRAW]
Setswhetherornottolinktothecamera'simagequalitysetting.
On,Off RefertotheSettingValuesCorrespondenceTablewhen[ColorGamut/
Gamma/EOTF],[ColorTemperature],and[ColorRange]areallsetto[On].
(
67)
ColorGamut/Gamma/
EOTF
On,Off Theimagequalityofthedisplaycorrespondstothecamera'ssettings.
ColorTemperature On,Off
DisplayColorGamut ITU-RBT.709
ITU-R BT.2020
DCI-P3
Setsthecolorgamutshownonthedisplaywhenthecamera's[Color
Space]issetto[CinemaGamut]or[DCI-P3+].
AutomaticAdjustment
(ARRI)
When[PictureMode] [User6]to[User7],[InputConguration] [12-3G/HD-SDI]
Setswhetherornottolinktothecamera'simagequalitysetting.
On,Off RefertotheSettingValuesCorrespondenceTable.(
68)
UserLUT Rec2100-PQ-1K-100
Rec2100-HLG-1K-200
UserLUT1-8
When[AutomaticAdjustment(ARRI)] [On]
Setsthecolorgamutandgamma/EOTFshowninthedisplay.
OSD Menu
64
Sub Menu Setting Options (Bold: factory default)
AutomaticAdjustment
(VARICAM)
When[PictureMode] [User6]to[User7],[InputConguration] [12-3G/HD-SDI]
Setswhetherornottolinktothecamera'simagequalitysetting.
On,Off RefertotheSettingValuesCorrespondenceTable.(
68)
UserLUT V-Log to V-709
UserLUT1-8
When[AutomaticAdjustment(VARICAM)] [On]
Setsthecolorgamutandgamma/EOTFshowninthedisplay.
Anamorphic On,Off WhenaCanoncameraisconnected,displaysinaccordancewiththe
settingswhenanamorphiclensdisplaysettingsareincludedinthecamera
metadata.
AreaMarker
11
ARRIFrameline1A
ARRIFrameline1B
Off
WhenanARRIcinemacameraisconnectedtothisdevice,the[HPosition],
[VPosition],[Width],and[Height]forthe[AreaMarker]changedepending
onthemetadata.
CameraInformation Automatic
On
Off
Setsconditionstodisplaycamerainformation.
[Automatic]:Camerainformationisdisplayedfor4secondswhenthe
informationhaschanged.
[On]:Camerainformationisalwaysdisplayed.
[Off]:Camerainformationisnotdisplayed.
OSD Menu
65
1
Theinformationdisplayfunctionsthatcanbedisplayedvarydependingonthevideodisplay'ssettingsortheinputsignalstatus.
=
:Canview—:Cannotview
Time
Code
Audio Level
Meter
Wave
Form
Monitor
Vector
Scope
Histo-
gram
Frame
Luminance
Monitor
Pixel Value
Check
WithanSD-SDIsignal
= =
— — — — —
Whilezooming:When[Zoom] [Type]issetto[Normal]
= =
— — — — —
When[FrameHold]is[On]
(Forprogressivesignals)
— —
= = = = =
When[FrameHold]is[On]
(ForinterlacedorPsFsignals)
— — — —
= = =
When[Peaking] [Enable]issetto[Peaking1]or
[Peaking2]
= =
— —
= = =
Duringexecutionof[PlaybackFile]under[ScreenCapture]
— — — — — — —
Whenthedisplaypositionand[AudioLevelMeter]tobe
displayedisthesame
—
= = = = =
When[TestPattern]isdisplayed
— — — — — — —
When[MultiView(Quad)]isdisplayed
= =
— — — — —
When[MultiView(Dual)]isdisplayed
= = = =
— — —
When[SingleInputDualView]isdisplayed
= = = = = =
—
When[ChannelSettings] [PictureMode] [Type]is
setto[L/R]:When[MultiView(Dual)]or[SingleInputDual
View]isdisplayed
= = = =
— — —
When[ChannelSettings] [PictureMode] [Type]isset
to[L/R],andwhenasinglescreenisbeingused
= =
— — — — —
When[PictureFunctionSettings] [CompareView]
[Enable]issetto[On]:When[SingleInputDualView]isset
to[Off]andalsotheresolutionis4096x2160or3840x2160
= =
— — — — —
When[WaveFormMonitor]isdisplayed:When[WaveForm
Monitor]
[SelectSignal]is[R],[G],[B]
= = =
—
= = =
When[WaveFormMonitor]isdisplayedand[WaveForm
Monitor]
[Size]is[Large]:Whenthe[Position]settings
for[WaveFormMonitor]and[VectorScope]arethesame,
orwhenusing[MultiView(Dual)]/[SingleInputDualView]
display
= = =
—
= = =
WhenanI/PsF4Ksignalisdisplayedononescreenand
whenthe[WaveFormMonitor]and[VectorScope][Position]
settingsarethesame
= = =
—
= = =
Whenthereisnosignalortheinputsignalisnotsupported
= = = =
— — —
Whendisplayingvideoatresolutionsotherthan4096x2160
/3840x2160/2048x1080/1920x1080
= = = =
— — —
OSD Menu
66
2
• When[MultiView(Dual)]isdisplayed,the[HOffset]settingisinvalid.
 • [Type]:ThissettingbecomesinvalidwhenHDMIsignalisinputandisxedto[VITC].
3
[Position]:Thissettingbecomesinvalidinthe[MultiView(Dual)]display.
4
• When[ChannelSettings] [AudioInput]issetto[Automatic]
-
Whendisplayingas[MultiView(Quad)],[ChannelNumber]becomes[2CH].
-
Whendisplayingas[MultiView(Dual)],[ChannelNumber]becomes[4CH].
 • When[ChannelNumber(SDI)]issetto[8CH(1-4,5-8)],if[Size]issetto[Large],theresultingdisplaywillbethesameasfor[8CH].
5
[Size]:Fixedto[Small]during[SingleInputDualView].
6
• Theupdatetimefor[FrameLuminanceMonitor]maytakealongduration,orgraphindicationof[FrameLuminanceMonitor]mayberesetwhen
displayingthe[FrameLuminanceMonitor]andoperatingtheOSDmenu.
 • [Size
]
:Fixedto[Small]during[SingleInputDualView].
7
ItmaytaketimetorefreshwhenusingtheOSDmenuwhile[PixelValueCheck]isdisplayed.
8
• Ifthepoweristurnedoffonceandthenbackon,thetestpatternwillnotbedisplayed.
 • Thetestpatternwillbeerasedinthefollowingcases:
-
Whencalibrationhasbeenstarted
-
WhenachannelischangedusingtheCHbutton,FbuttonassignedforChannelUP/ChannelDOWN,or[SelectChannel]under[Channel
Settings]
-
Whenchanging[InputConguration]or[SelectInputSignal]under[ChannelSettings]
-
When[ResetAllSettings]isexecuted
9
• [SignalMonitoring]cannotbeusedinthefollowingcases:
-
When[SingleInputDualView]isdisplayed
-
Whenanenlargedimageisdisplayed
-
Duringdisplayofthetestpattern
-
Duringexecutionof[PlaybackFile]under[ScreenCapture]
 • Whenanerrorisdisplayed,[InMonitorDisplay]willnotbeshown.
 • Thepositiontheerrorisdisplayedcanbeadjustedwith[InMonitorDisplay] [Position].
 • [8K2SISwitching]:Doesnotoperateinthefollowingcases:
-
When[FrameHold]is[On]
10
• WhenplayingbackcapturedimagesonotherDP-V3120orPC,colormaynotbeplayedbackprecisely.
 • CannotreplayHDR/SDRcomparisonimageswith[_pc]inthelenames.
11
Thiscannotbedisplayedwhen[MarkerPreset]is[Off].
OSD Menu
67
■
Parameter of Cinema EOS cameras and Canon displays
CinemaEOScameras Canondisplay
ColorSpace ColorGamut Color
Temperature
BT.709 ITU-RBT.709 D65
BT.2020 ITU-RBT.2020 D65
DCI-P3 DCI-P3 DCI-P3
DCI-P3+ DCI-P3+to709 D65
DCI-P3+toDCI DCI-P3
CinemaGamut CinemaGamutto709 D65
CinemaGamutto2020 D65
CinemaGamuttoDCI DCI-P3
RAWGamut CinemaGamutto709 D65
CinemaGamutto2020 D65
CinemaGamuttoDCI DCI-P3
CinemaEOScameras Canondisplay
Gamma/EOTF Gamma/EOTF HDRRange
CanonLog CanonLog(HDR) —
CanonLog2 CanonLog2(HDR)
RAWGamma
CanonLog3 CanonLog3(HDR)
ST2084,PQ SMPTEST2084(PQ) 2000
Normal(BT.709) 2.2 —
WideDR
EOSStd.
DCI-P3 2.6
OSD Menu
68
■
Parameter of ARRI Cinema camera and Canon displays
ARRICinemacamera Canondisplay
ColorSpace DisplayColor
Gamut
CDL/UserLUT ColorGamut Gamma/EOTF HDRRange
REC709 — — ITU-RBT.709 2.2 —
REC2020 — — ITU-RBT.2020 2.2 —
WideGamutLogC Rec2100-PQ-
1K-100
ARRI(Rec2100-
PQ-1K-100)
ITU-RBT.2020 SMPTEST2084
(PQ)
1000
Rec2100-HLG-
1K-200
ARRI(Rec2100-
HLG-1K-200)
ITU-RBT.2020 Hybrid
Log-Gamma
—
UserLUT1-8 UserLUT1-8 — — —
■
Parameter of Panasonic Cinema camera and Canon displays
PanasonicCinema
camera
Canondisplay
ColorSpace DisplayColor
Gamut
CDL/UserLUT ColorGamut Gamma/EOTF HDRRange
V-709 — — ITU-RBT.709 2.2 —
V-Log
V-LogtoV-709
VARICAM(V-Log
toV-709)
ITU-RBT.709 2.2 —
UserLUT1-8 UserLUT1-8 — — —
OSD Menu
69
Picture Function Settings
Thismenuisusedtosetvideoassistancefunctions,forexample.
Sub Menu Setting Options (Bold: factory default)
Peaking
1
Theoutlineisdisplayedinacolor,usedtocheckthefocus.Customizespeakingswhichareassigned
toPeaking1orPeaking2.
Enable Peaking1
Peaking2
Off
SwitchesthepeakingdisplaymodeandalsosetspeakingtoOff.
Monochrome
When[Peaking1]
On,Off
When[Peaking2]
On,Off
Displaysvideoinmonochrome.
Frequency
When[Peaking1]
Low,Middle,High
When[Peaking2]
Low,Middle,High
Setsthecentralfrequencyofcontourenhancementsignals.
Range -3~3(0) Setsthewidthoftherangetobecolored.
Color White,Red,Green,
Blue,Yellow,Cyan,
Magenta
Setsthecolortobeused.
FalseColor
2
Displaysdifferentcolorsforthevideo'sbrightnesslevelstomakeiteasiertochecktheexposureand
brightnessdistribution.Customizesthefalsecolorandsetsittofalsecolor1orfalsecolor2.
Enable FalseColor1
FalseColor2
Off
SwitchesbetweenFalseColordisplaymodeandnon-display.
Type Automatic
IRE
SMPTEST2084(PQ)
HybridLog-Gamma
Setsthetintcolordisplaymethod.
[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]settings.
HDR/SDRBorder 100,200 SetstheboundaryvaluefortheSDR/HDRareas.
Range-SDR
When[FalseColor1]
On,Off
When[FalseColor2]
On,Off
SetswhethertotinttheSDRarea.
When[On],setsthesizeoftheareatobetinted.(incrementsof10)
Monochrome/Brown:10to190(90*)(40)
Brown/Monochrome:20to200(100*)(80)
*When[HDR/SDRBorder]is[100]
OSD Menu
70
Sub Menu Setting Options (Bold: factory default)
Range-HDR When[FalseColor1]
Automatic
Automatic(OverRange)
Manual
When[FalseColor2]
Automatic
Automatic(OverRange)
Manual
Setsthetintcolorrange.
[Automatic]:Setstheupperlimitautomaticallyinaccordancewiththe
[Gamma/EOTF]settings.
When[Manual]or[Automatic(OverRange)]isselected,setsthesizeof
theareatobecolored.
• Settingwhen[SMPTEST2084(PQ)](100to1000:10increments,
1000to4000:100increments,4000to10000:1000increments)
Blue/lightblue:250(150*)to400
Lightblue/green:400to1000
Green/yellow:600to4000
Yellow/orange:800to8000
Orange/red:1000to10000(Onlywhenusing[Manual])
• Settingwhen[HybridLog-Gamma](10increments)
Blue/lightblue:250(150*)to300
Lightblue/green:300(200*)to500
Green/yellow:400(300*)to700
Yellow/orange:500(400*)to900
Orange/red:600(500*)to1000(Onlywhenusing[Manual])
*When[HDR/SDRBorder]is[100]
OverRange
3
Displaysvideoinmonochrome,withtheareaswherethesetrangeisexceededareshowntinted.
Enable On,Off Switches[OverRange]On,Off.
Range(HDR) Automatic,Manual [Automatic]:When[Gamma/EOTF]
[SMPTEST2084(PQ)]or[Hybrid
Log-Gamma],onlytheareasthatexceedthe[HDRRange]settingare
tinted.
[Manual]:Onlyareasthatexceedtherangesetat[SMPTEST2084(PQ)]
or[HybridLog-Gamma]aretinted.
SMPTEST2084
(PQ)
100to10000(1000) Setsthetintcolorrange.(100to1000:10increments,1000to4000:100
increments,4000to10000:1000increments)
HybridLog-Gamma 100to1000(1000) Setsthetintcolorrange.(10increments)
Range(SDR) 512to1023(940) Setsthetintcolorrange.(1increments)
2020OutsideofGamut
View
3
When[PictureMode]or[ColorGamut] [ITU-RBT.2020]
Displaysvideoinmonochrome,withtheareaswherethecolorgamutexceedstheselectedcolor
gamutshowninred.
Enable On,Off SwitchesbetweenOnandOfffor[2020OutsideofGamutView].
ColorGamut ITU-R BT.709
Native
Setsthe[ColorGamut]tobesetasoutofcolorgamut.
Range 0to512(0) Setstherangewhentintingdarkareas.(1increments)
0:Tintsalldarkareas.
512:Darkareasatthesetvaluesorlessarenottinted.
OSD Menu
71
Sub Menu Setting Options (Bold: factory default)
Monochrome
4
On,Off Videoisdisplayedinmonochrome.
BlueOnly
5
On,Off Cutsredandgreensignals,anddisplaysonlybluesignalsinmonochrome.
RedOff
4
On,Off Videoisdisplayedwithredsignalscut.
GreenOff
4
On,Off Videoisdisplayedwithgreensignalscut.
BlueOff
4
On,Off Videoisdisplayedwithbluesignalscut.
CompareView
6
Imageshavingdifferentimagequalitysettingsaredisplayedontheleftandrightscreensfor
comparison.(When[PictureMode]forleftandrightscreensisthesame)
Enable On,Off SetsComparisonmodeOnorOff.
Type Automatic
HDR/SDR
CDL/UserLUT
Setsthetypeoftheimagetocompare.
[Automatic]:[HDR/SDR]when[Adjustment]
[CDL/UserLUT]is[Off],
otherwisesetat[CDL/UserLUT].
[HDR/SDR]:HDRandSDRimagesaredisplayed.
[CDL/UserLUT]:Theimageonwhich[CDL]or[UserLUT]isappliedis
displayedonlyintheleftscreen.
HDR/SDRConvert
Method
2020 HDR to 709 SDR
2020HDRto2020SDR
UserLUT1-8
Off
When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])]
SetsthedisplaymethodofthescreensettoSDR.
[2020HDRto709SDR],[2020HDRto2020SDR]:Settingdiffers
accordingtothe[Gamma/EOTF]settings.
 [SMPTEST2084(PQ)]:The[UserLUT]correspondingtoeachsetting
isapplied.
 [HybridLog-Gamma]:The[UserLUT]correspondingtoeachsettingis
applied.
 [CanonLog(HDR)],[CanonLog2(HDR)],[CanonLog3(HDR)]:
[CanonLog],[CanonLog2]or[CanonLog3]isapplied.
 [S-Log2(HDR)],[S-Log3(HDR)]:[HDRRange]setting[100]isset.
[UserLUT1-8]:Thespecied[UserLUT]isapplied.Afterapplying[User
LUT]theadjustmentinsidethedisplayxes[ColorGamut]at[ITU-R
BT.709]and[Gamma/EOTF]at[2.4].
[Off]:Onlybrightnessislowered.
Contrast(SDR) 500to2000(1000)
When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])]
AdjuststheSDRcontrast.
ColorTemperature
(SDR)
Normal,
D93,D65,
D65Custom,
DCI-P3
When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])]
SetstheSDRcolortemperature.
Gain(SDR) -15to15(0)
When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])]
SetstheSDRgain.
OSD Menu
72
Sub Menu Setting Options (Bold: factory default)
UserLUTTarget1 UserLUT1to
UserLUT8,Off
When[Type]issetto[CDL/UserLUT]or[Automatic([UserLUT])]
Setsthecomparisontarget.
UserLUTTarget2
(Quad)
UserLUT1to
UserLUT8,Off
When[Type]issetto[CDL/UserLUT]or[Automatic([UserLUT])]
Setsthecomparisontarget.
[UserLUT1-8]:AppliestheUserLUTseparatelyforeachquarterscreen
anddisplayscomparisonswhendisplaying[MultiView(Quad)].
UserLUTTarget3
(Quad)
UserLUT1to
UserLUT8,Off
1
• [Peaking]cannotbedisplayedduringtheexecutionof[PlaybackFile]under[ScreenCapture].
 • [Enable]changesto[Off]whenthepoweristurnedonagain.
 • Cannotsetwhen[CompareView]
[Enable]is[On].
2
• [FalseColor]cannotbedisplayedduringtheexecutionof[PlaybackFile]under[ScreenCapture].
 • [Enable]changesto[Off]whenthepoweristurnedonagain.
 • Cannotsetwhen[CompareView]
[Enable]is[On].
 • When[IRE]in[Type]isselected,[HDRRange]settingsbecomeinvalid.
3
• [Enable]changesto[Off]whenthepoweristurnedonagain.
 • Cannotsetwhen[CompareView]
[Enable]is[On].
4
• Whenthepoweristurnedoffandon,becomes[Off].
 • Cannotsetwhen[CompareView]
[Enable]is[On].
5
• [BlueOnly]cannotbesetwhen[CDL/UserLUT]isasettingotherthan[CDL1-8]or[Off].
 • Whenthepoweristurnedoffandon,becomes[Off].
 • Cannotsetwhen[CompareView]
[Enable]is[On].
6
• [CompareView]cannotbesetinthefollowingcases:
-
When[ChannelSettings] [PictureMode] [Type] [L/R]
-
When[Peaking],[FalseColor],[OverRange]or[2020OutsideofGamutView] [Enable] [On]
-
When[Monochrome],[BlueOnly],[RedOff],[GreenOff]or[BlueOff] [On]
-
ForSD-SDIsignals
 • Whenasignalwitharesolutionof2Korsmallerisdisplayedonasinglescreen,changesto[SingleInputDualView].
OSD Menu
73
Network/IMD Settings
Sub Menu Setting Options (Bold: factory default)
LAN
1
Conguresvideodisplay'snetworksettings.
CongureanIP
Address
Automatic
Manual
[Automatic]:ConguresanIPaddressautomaticallywithDHCP/AutoIP.
[Manual]:CongureanIPaddressandsubnetmaskmanually.
Display 192.168.0.1
SubnetMask 255.255.255.0
Wi-Fi ThisisusedtoconnectthevideodisplaytoanetworkusingWi-Fiandcontrolitfromanexternal
controldevice.(
20)
Control Infrastructure
AccessPoint
Off
SetstheWi-Ficonnectionmethod.
[Infrastructure]:ThismethodconnectstoWi-Fiviaanaccesspoint.
[AccessPoint]:Thisdeviceactsasanaccesspoint,andthismethod
connectsthedevicedirectlytotheWi-Fidevice.
Infrastructure Setstheaccesspointtoconnectto.Atfactorysettings,theaccesspoint
toconnecttoisnotcongured.
Password Youmayspecifyapasswordifneededbyusingupto24alpha-numerical
charactersandsymbols.Thedefaultpasswordisblank.
AccessPoint Congurestheaccesspoint.
SSID EntertheSSID.Thiscanbesetusingupto24alpha-numericalcharacters
andsymbols.
Frequency 2.4GHz,5.0 GHz Setsthecommunicationmode.
Channel
When[2.4GHz]
1to13(incrementsof1)
When[5.0GHz]
36,40,44,48
Setsthechanneltouseforcommunication.
Password Enterthepassword.Thisissetusingbetween8and24alpha-numerical
charactersandsymbols.
Remembertochangethedefaultpassword.Thedefaultpasswordisthe
serialnumber.Theserialnumberistheindividual12-digitnumberassigned
toyourproduct,andcanbecheckedonthe[SystemInformation]screen.
Web SettingsforoperatingthisdeviceremotelyusingaWebbrowser.(
22)
Control On,Off Setwhetherornottoreceivecontrolsignalsfromanexternaldevice,
connectedusingnetworkconnectionorWi-Ficonnection,inorderto
operatethevideodisplayremotelyfromthedevice'swebbrowser.
UserID EntertheuserID.Thisissetusingupto16alpha-numericalcharacters
andsymbols.ThedefaultuserIDis[user].
Password Enterthepassword.Thisissetusingbetween8and16alpha-numerical
charactersandsymbols.Thedefaultpasswordistheserialnumber.The
serialnumberistheindividual12-digitnumberassignedtoyourproduct,
andcanbecheckedonthe[SystemInformation]screen.
OSD Menu
74
Sub Menu Setting Options (Bold: factory default)
DisplaySettingLink
2
Adjustment
Channel
Adjustment/Channel
Off
SettingsarelinkedbetweendisplaysconnectedviaLAN.This device's
settingvaluesareappliedtoalllinkeddisplays.
*Beforelinkingsettings,checkthatthefollowingconditionsaremet.
a
Turnonthepowertothisdisplayandthedisplay(s)tolinkwith,and
checkthattheyareallrecognizedonthenetwork
b
Changetheadjustmentorchannelandcheckthattheotherdisplay(s)
alsochange
Thedevicesandrmwareversionsthatcanbelinkedareshownbelow.
DP-V3120:Version1.0orhigher
DP-V2410:Version1.4orhigher
DP-V2420/DP-V2421:Version1.3orhigher
DP-V1710/DP-V1711:Version1.3orhigher
DP-V2411:Version1.2orhigher
DisplaysnotconnectedcanberemovedwiththeRESETbutton.
InMonitorDisplay ThevideodisplaysupportsTelevisionSystemsLtd.’s“TSLUMDProtocolVer.5.0”.Youcanoperate
thevideodisplayusinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersand
tallylightsonthescreen.Youcaninputanycharactersyoulikedirectlyfromthisvideodisplay.(
19)
Control TSL Ver. 5.00
Manual
Off
Setswhetherornottoreceivethecontrolsignalfromtheconnected
device.
[Manual]:Selecttoinputthecharactersonthisvideodisplay.Doesnot
receiveacontrolsignalfromtheconnecteddevice.
Position Top
Bottom
Thissetswhetherthecharactersandtallylightswillbedisplayedatthe
toporthebottom.
ManualDisplayType
3
Automatic
Single
DualA,B,DualC,D
QuadA,B,C,D
[Automatic]:ChangesdisplayinaccordancewiththeInputConguration.
[Single]:Single-screendisplay.
[DualA,B],[DualC,D]:Dual-screendisplay.
[QuadA,B,C,D]:Quadruple-screendisplay.
ManualString (Single)
(Dual/QuadA)
(Dual/QuadB)
(Dual/QuadC)
(Dual/QuadD)
(SingleDualL)
(SingleDualR)
When[Control] [Manual]
Setsthecharacterstodisplayfortheselected[ManualString].Youcan
inputupto16alphanumericcharacters.
1
Cannotbesetwhen[PoweronSetting]is[User1]to[User3].
2
• OperatingtheGPIorthebuttonsonthisdisplaywillreectsettingvaluechangesinall.LinkedoperationsusingPayloadID,HDMI,Camera,etc.
willnotreectthesettingschanges.
 • Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsettingranges,somesettingswillnotbecorrectlyexported(settingswillnotbe
changed,willreverttofactorydefaults,etc.)
 • Inanenvironmentwherecommunicationcannotbedoneproperly,suchaswhenthenetworkenvironmentisunstableorthebandwidthis
insufcient,settingsmaynotlinkproperly.OnlyconnectdisplaystobecontrolledtotheLAN.
 • Upto32displayscanhavetheirsettingslinked.
3
When[FunctionSettings] [SignalMonitoring] [Control]issetto[On]then[ManualDisplayType]isxedto[Automatic].
OSD Menu
75
System Settings
Thismenuisusedtoconguresystemsettingsrelatedtothevideodisplay.
Sub Menu Setting Options (Bold: factory default)
Function/ChannelButton SetsthefunctionorchanneltoassigntotheFbuttonsorCHbutton.
DisplayFunction SetsthefunctiontoassigntotheFbuttonsofthemainunit(
14).SelectanFbuttonandassigna
functionfromthefollowinglist(
80).
DisplayFunction(CDL)
DisplayChannel SetsthechanneltoassigntotheCHbuttononthedisplay.
CH1 CH1toCH20(CH1) SelectaCHbuttonandregisterachannelnumber.Alistofsettingsunder
themenu[ChannelSettings](
41)isdisplayed.
CH2 CH1toCH20(CH2)
CH3 CH1toCH20(CH3)
Remote(GPI)
1
Youcanoperatethevideodisplayusinganexternalcontrollersuchasaswitcherthathasbeen
connectedtotheREMOTEterminal.Operatesbyconnecting(shorting)theGND(No.8Pin)toNo.s
1to7.
Type Level,
ShortEdge
[Level]:Operateswhileshorted.
[ShortEdge]:Switchesbetween“operate”/”donotoperate”foreach
short.
Pin1~Pin7 AssignsfunctionsineachGPIpin.(
18)
Functionsthatcanberegistered
2
:
SMPTE-C,EBU,ITU-RBT.709,ITU-RBT.2020,AdobeRGB,DCI-P3,User1(2020PQ),
User2(2020HLG),User3(DCIPQ),User4(DCIPQD65),User5~User7,CINEMAEOSSYSTEM,
ACESproxy(ver.1.0.1),CH1toCH5,AspectMarker,SafetyZoneMarker1/2,AreaMarker,
CenterMarker,GridMarker,TimeCode,AudioLevelMeter,WaveFormMonitor,VectorScope,
Histogram,FrameLuminanceMonitor,FalseColor1/2,CompareView,MENU,TallyGreen,
TallyRed,PowerOn,—(Notset)
Functionswithvalidsettings:
AspectMarker,SafetyZoneMarker1/2,AreaMarker,CenterMarker,GridMarker,TimeCode,
AudioLevelMeter,WaveFormMonitor,VectorScope,Histogram,FrameLuminanceMonitor,
FalseColor1/2,CompareView
About[Tally]
Atallyappearsatthetopofthescreen.Combining[TallyGreen]and[TallyRed]makes[TallyAmber].
Language English
日本語
简体中文
SetsthelanguageoftheOSDmenuandmessages.
Date/Time Setstheyear/month/date/hour/minute.
OSD Menu
76
Sub Menu Setting Options (Bold: factory default)
DisplayName Setsthenameofthemainunit.Youcaninputupto16alphanumericcharacters.
OSDSettings
Banner Setsthebannerdisplaymethodforthechannelname,signalinformation,andstatusofthevideo
display.
AutomaticDisplay On,Off Automaticallydisplaysthebannerwhentheinputsignalorpicturemode
arechanged.
PictureMode On,Off Setswhethertodisplay[PictureMode].
TimeOut On,Off Thebannerautomaticallydisappears.
FunctionButtonGuide On,Off [On]:WhenallOSDarehidden,youcandisplaythelistoffunctions
assignedtoanFbuttononthevideodisplaybypressingthejogdial.
[Off]:FunctionButtonGuideisnotdisplayed.
OSDPosition Mode 1 (4096x2160)
Mode2(3840x2160)
[Mode1(4096x2160)]:OSDisdisplayedina4096x2160area.
[Mode2(3840x2160)]:OSDisdisplayedina3840x2160area.
OSDSize Large
Small
ThesizeoftheOSDmenucanbeselectedfrom[Large]and[Small].
OSDBrightness Automatic
(High - Middle)
Automatic
(High-Low)
High
Middle
Low
SetsthebrightnessoftheOSD.
Thebrightnessisautomaticallyadjustedtosuitthescreencontrastwhen
[Automatic]isselected.Youcanchoosebetween[High-Low]and
[High-Middle]adjustmentranges.
ProtectSettings Locksthesettingssotheycannotbechanged.WhenyoupresstheMENUbutton,[Signal/System
Information]appears,butotheroperationsaregrayedoutbecausetheyarelocked.
Password Setapasswordtoprotectsettings.Useafour-digitnumber(0000to
9999).Theinitialpasswordisblank.
ProtectTarget YoucanremovePictureModeandSelectChannelfromtheitemstobe
protected.
PictureMode On,Off [On]:Protectsthe[PictureMode]settings.
[Off]:Removesthe[PictureMode]settingsfromprotecttarget.
SelectChannel On,Off [On]:Protectsthe[SelectChannel]settings.
[Off]:Removesthe[SelectChannel]settingsfromprotecttarget.
FunctionSettings On,Off [On]:Protectsthe[FunctionSettings]settings.
[Off]:Removesthe[FunctionSettings]settingsfromprotecttarget.
Protect Select[OK]toprotect.Whenapasswordhasbeenset,enterthe
passwordandselect[OK].
UnlockingProtectSettings
Movetheselectionframeto[Protect]andpresstheJogdialfor
approximately3seconds.Whenapasswordhasbeenset,enterthe
passwordandselect[OK].
OSD Menu
77
Sub Menu Setting Options (Bold: factory default)
PowerIndicator/ButtonLEDSettings
PowerIndicator
Brightness
Off
1to5(3)
Adjuststhebrightnessofthepowerindicatoronthemainunit.Thegreater
thenumber,thehigherthebrightness.
DisplayButtonLED On,Off SetstheFbuttonsandthelampontheface.
ButtonNameLighting
Time(sec.)
60,30,10,5 Setsthetime(sec)untilthelamponthefacegoesout,ifnooperationis
performed.
CompatibleSettings SetscompatibilitywithHDMIdevicesandoperationoffunctionsthatdifferaccordingtotheversion
ofthevideodisplay’srmware.
HDMI Normal
Compatible1
Compatible2
[Normal]:Allformatsaresupported.
[Compatible1]:Setthisoptionwhenvideoisnotplayedcorrectlyin
[Normal].HDRsignalsofaluminancehigherthanthatofthedisplay
mainunitarenotsupported.
[Compatible2]:Setthisoptionwhenvideoisnotplayedcorrectlyin
[Normal]or[Compatible1].[4K50.00P/60.00P]andHDRsignalsare
notsupported.
BacklightControl Normal
Compatible
[Normal]:HDRimagevisibilityisimprovedcomparedtousingrmware
Version1.1forDP-V2420/DP-V2421.
[Compatible]:DisplaysanequivalentdisplaytousingrmwareVersion1.1
forDP-V2420/DP-V2421.
ReduceBacklightFlash On,Off
When[Adjustment]
[BacklightControl]issettoanoptionotherthan[Off],
thescreenmayexhibitaashincasessuchasswitchingbetweenscenes
withalargedifferenceinluminance.Youcanuse[ReduceBacklightFlash]
toreducethisphenomenon.
UserLUT
3
Normal
Compatible
[Normal]:Informationdisplayforvideossuchaswaveformmonitors
dependsonthestatusfollowingapplicationofUserLUT.
[Compatible]:Informationdisplayforvideossuchaswaveformmonitors
dependsonthestatusbeforeapplicationofUserLUT.
Firmware/LicenseUpdate Thisfunctionisusedtoupdatethevideodisplayrmware.RefertotheCanonwebsitefordetailed
information.
OSD Menu
78
Sub Menu Setting Options (Bold: factory default)
Export/Import
4
Setstheexport/importmainmenusettings.
Export
Target USB
User1toUser3
LAN
Selecttheexportdestination.
[USB]:ExporttoaUSBmemory.
[User1]to[User3]:Exporttothebuilt-inmemoryofthemainunit.
[LAN]:ExportstoadisplayconnectedwithaLAN.
Filename
When[Target] [USB]or[User1-3]
Factorydefaultis"dinfo_dpv3120.dat".Youcanchangethenameofthe
letobeexportedtotheUSBmemorywithin16one-bytecharacters
includingalphabeticalcharacters,numbers,andsymbols.
Display
When[Target] [LAN]
Selectthedisplaywiththesettingstoexportfromthedisplaysconnected
viaLAN.
Execute Performsexport.
Import
Target USB
User1toUser3
Specifythesavedestinationfortheletobeimported.
Filename Displaysleswiththeextension".dat"soyoucanselectfromamong
them.
Settings All
Adjustment
ChannelSettings
DisplaySettings
AudioSettings
MarkerSettings
Function/Network/
SystemSettings
Selectthesettingstoimport.
Execute Performsimport.
PoweronSetting Last memory
User1toUser3
Youcanselectthestateofthedisplaywhenthepoweristurnedon.
[Lastmemory]:Launcheswiththesamesettingsaswhenthepowerwas
turnedofftheprevioustime.
[User1]to[User3]:Itstartsupwiththesettingssavedin[User1]to[User3]
under[Export].
ResetAllSettings OK
Cancel
Returnsallsettingstofactorydefault.Whenselected,themessage[Reset
allsettingstofactorydefaults?]appears.
[OK]:Performsreset.
[Cancel]:Returnstothepreviousscreenwithoutresetting.
OSD Menu
79
1
• Thisfunctionwillnotworkcorrectlyinthefollowingcases.
-
Ifthesamefunctionisassignedtomultiplepins.
-
Ifthechangestothe[Remote(GPI)]settingandthepinassignmentsweremadewhenthepinswereshorted.
2
• Markers:Themarkercannotbedisplayedwhen[MarkerPreset]issetto[Off].
 • [PowerOn]:Canonlyberegisteredto[Pin7].
3
• [UserLUT]:When[PictureFunctionSettings] [CompareView] [Enable]issetto[On],xesas[Normal].
4
• Thefollowingsettingscannotbeexportedorimported.
DisplaySettings ZoomPreset,FrameHold
PictureFunctionSettings Peaking(Enable),FalseColor(Enable),OverRange(Enable),2020OutsideofGamutView(Enable),
TestPattern,Monochrome,BlueOnly,RedOff,GreenOff,BlueOff,CompareView(Enable)
Network/IMDSettings LAN,Wi-Fi,DisplaySettingLink
(LANandWi-Fi:onlyexport/importvianetwork)
SystemSettings Date/Time,Export/Import,PoweronSetting
 • UserLUTdatacannotbeexportedorimportedto[User1]to[User3]under[Target].
 • Dataexportedfromthisproductmaynotbeimportedtoproductsofwhichrmwareversionisearlierthantheversionofthisproduct.Toimport
data,updatethermwaretothelatestversion.
OSD Menu
80
■
Function to allow registration for the display F buttons ( 75)
Item Options Item Options
Adjustment PictureMode ChannelSettings ChannelUP
1
Contrast ChannelDOWN
1
Brightness SelectInputSignal
Chroma AudioInput
ChromaUp SingleInputDualView
Sharpness CH1toCH20
BacklightControl DisplaySettings ScreenScaling
Gamma/EOTF Anamorphic
HDR ScalingMethod
HDRRange ZoomPreset
HDR/SDRView Zoom1
Gain Zoom2
Bias Zoom3
xy FrameHold
PictureMode SMPTE-C BackgroundColor
EBU AudioSettings SDIGroup
ITU-RBT.709 CHL
ITU-RBT.2020 CHR
AdobeRGB Volume
DCI-P3 AudioSwitch
User1(2020PQ) MarkerSettings
2
MarkerPreset
User2(2020HLG) Marker1
User3(DCIPQ) Marker2
User4(DCIPQD65) Marker3
User5~User7 Marker4
CINEMAEOSSYSTEM Marker5
ACESproxy(ver.1.0.1) AspectMarker
CDL/UserLUT CDL/UserLUT SafetyZoneMarker1
CDLRGB SafetyZoneMarker2
CDLR AreaMarker
CDLG CenterMarker
CDLB GridMarker
CDLSOP/SAT
CDLSlope
CDLOffset
CDLPower
CDLSaturation
CDL/UserLUT
Bypass
CDLExport/Import
OSD Menu
81
Item Options
FunctionSettings TC/ALM
TimeCode
AudioLevelMeter
WFM/VEC
WaveFormMonitor
WFMSelectSignal
VectorScope
Histogram/FrameLuminance
Histogram
FrameLuminanceMonitor
PixelValueCheck
SignalMonitoringLog
Capture
CameraInformation
PictureFunction
Settings
Peaking
Peaking1
Peaking2
FalseColor
FalseColor1
FalseColor2
OverRange
2020OutsideofGamutView
Monochrome
BlueOnly
RedOff
GreenOff
BlueOff
CompareView
SystemSettings SignalInformation
HideOSD
3
1
Whenchangingchannelswith[ChannelUP/DOWN],thechannelswith[InputConguration]( 41)setto[–]areskipped.
2
WhenanymarkersettingsarechangedusinganFbutton,thosechangeswillbeappliedto[Enable]underthecurrentlyselected[MarkerPreset].
3
[HideOSD]isafunctiontohideallOSD.When[On]isselected,OSD,[Separator]and[BackgroundColor]arehiddenbutthemenucanbeused.
OSD Menu
82
Signal Information
Showsthesignalinformation.When[SelectInputSignal]is[QuadInput],informationfortheentiresignalandeach
inputisdisplayed.Selectasignalwiththejogdialaccordingtotheguideattoprightcornerofthemenu.Whensignal
informationhasbeenobtainedalthoughitisnotdisplayedonthescreen,thecontentoftheinformationisgrayedout.
SDI Signal HDMI Signal
Item Display Example Item Display Example
Channel
InputConguration
SelectInputSignal
ImageDivision
Format
Resolution
PictureRate,I/P/PsF*
SDIPayloadID
VideoStandard
SamplingStructure,BitDepth
PictureRate
ScanningMethod
LinkNumber
Colorimetry
TransferCharacteristics
CH1
12-3G/HD-SDI(3G-A)
QuadInput
Automatic
Automatic
4096x2160
24.00P
89C34601
3G-SDI
4:4:4:4GBRA10-bit
24.00
Progressive/Progressive
(Transport/Picture)
Single/Link_1
UHD
SDR-TV
Channel
InputConguration
Format
Resolution
PictureRate,I/P/PsF
PixelEncoding,ColorDepth
Matrix
Range
EOTF
MaxLuminance(Peak/Avg.)
DisplayLuminance(Max/Min)
WhitePoint
PrimaryColorRed
PrimaryColorGreen
PrimaryColorBlue
CH4
HDMI
Automatic
4096x2160
60.00P
4:2:2YCbCr10-bit
ITU-RBT.709
Full
SMPTEST2084(PQ)
1000/500cd/m
2
1000-0.005cd/m
2
x=0.313,y=0.329
x=0.640,y=0.330
x=0.300,y=0.600
x=0.150,y=0.060
*Whencontentisgrayedout,anasterisk[*]maybedisplayedindicatinglow[PictureRate]accuracysuchas[24.00P*].
System Information
Showsthevideodisplaystatusandnetworkinformation.
Item Display Example
Display DP-V3120
SerialNo. 000000000000
Firmware/LicenseVer. 1.0
UsageTime* 5h
IPAddress 192.168.0.1
SubnetMask 255.255.255.0
MACAddress FF:FF:FF:FF:FF:FF
Wi-FiIPAddress 192.168.0.1
Wi-FiSubnetMask 255.255.255.0
*The[UsageTime]isnotalways[0]whenyoupurchasethedisplayduetofactoryinspection.
83
SupportedSignalFormat
SDI
*Formatsnotsupportingaudiosignals.
Transmission method Signal format Color format Color depth Standards
SD-SDI 720x487i59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE-259M
720x576i50.00Hz*
HD-SDI 1280x720P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE292-1
SMPTE296
1280x720P50.00Hz
1280x720P29.97/30.00Hz
1280x720P25.00Hz
1280x720P23.98/24.00Hz
1920x1080i59.94/60.00Hz SMPTE292-1
SMPTE274M
1920x1080i50.00Hz
1920x1080P29.97/30.00Hz
1920x1080PsF29.97/30.00Hz
1920x1080P25.00Hz
1920x1080PsF25.00Hz
1920x1080P23.98/24.00Hz
1920x1080PsF23.98/24.00Hz
2048x1080i59.94/60.00Hz
2048x1080i50.00Hz
2048x1080P29.97/30.00Hz SMPTE292-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
2048x1080PsF29.97/30.00Hz
2048x1080P25.00Hz
2048x1080PsF25.00Hz
2048x1080P23.98/24.00Hz
2048x1080PsF23.98/24.00Hz
3G-SDI
(LevelA)
1280x720P59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
10-bit SMPTE425-1
SMPTE296
1280x720P50.00Hz 4:4:4RGB
4:4:4YCbCr
10-bit
1280x720P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
10-bit
1280x720P25.00Hz 4:4:4RGB
4:4:4YCbCr
10-bit
1280x720P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
10-bit
1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE274M
Supported Signal Format
84
Transmission method Signal format Color format Color depth Standards
3G-SDI
(LevelA)
1920x1080i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P50.00Hz 4:2:2YCbCr 10-bit
1920x1080i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF29.97/30.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF25.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF23.98/24.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
2048x1080i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:2:2YCbCr
2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE2048-2
Supported Signal Format
85
Transmission method Signal format Color format Color depth Standards
3G-SDI
(LevelA)
2048x1080i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:2:2YCbCr
2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE2048-2
2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
Supported Signal Format
86
Transmission method Signal format Color format Color depth Standards
3G-SDI
(LevelB)
1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE274M
1920x1080i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P50.00Hz 4:2:2YCbCr 10-bit
1920x1080i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
2048x1080i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
2048x1080i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
Supported Signal Format
87
Transmission method Signal format Color format Color depth Standards
3G-SDI
(LevelB)
2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
Supported Signal Format
88
Transmission method Signal format Color format Color depth Standards
3G-SDI
(LevelB)
2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
DualLink3G-SDI
(LevelA)
1920x1080P59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE425-3
SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
2048x1080P59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE425-3
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
2048x1080P50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
2048x1080P47.95/48.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
DualLink3G-SDI
(LevelB)
1920x1080P59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE425-3
SMPTE372
SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
2048x1080P59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE425-3
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
2048x1080P50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
2048x1080P47.95/48.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
Supported Signal Format
89
Transmission method Signal format Color format Color depth Standards
DualLink3G-SDI
SquareDivision
(LevelB)
3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE425-3
SMPTE372
SMPTE274M
3840x2160PsF29.97/30.00Hz
3840x2160P25.00Hz
3840x2160PsF25.00Hz
3840x2160P23.98/24.00Hz
3840x2160PsF23.98/24.00Hz
4096x2160P29.97/30.00Hz SMPTE425-3
SMPTE372
SMPTE2048-2
4096x2160PsF29.97/30.00Hz
4096x2160P25.00Hz
4096x2160PsF25.00Hz
4096x2160P23.98/24.00Hz
4096x2160PsF23.98/24.00Hz
DualLink3G-SDI
2SampleInterleave
(LevelB)
3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE425-3
SMPTE372
SMPTE274M
3840x2160P25.00Hz
3840x2160P23.98/24.00Hz
4096x2160P29.97/30.00Hz SMPTE425-3
SMPTE372
SMPTE2048-2
4096x2160P25.00Hz
4096x2160P23.98/24.00Hz
QuadLinkHD-SDI 3840x2160i59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE292-1
SMPTE274M
3840x2160i50.00Hz
3840x2160P29.97/30.00Hz
3840x2160PsF29.97/30.00Hz
3840x2160P25.00Hz
3840x2160PsF25.00Hz
3840x2160P23.98/24.00Hz
3840x2160PsF23.98/24.00Hz
4096x2160i59.94/60.00Hz
4096x2160i50.00Hz
4096x2160P29.97/30.00Hz SMPTE292-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4096x2160PsF29.97/30.00Hz
4096x2160P25.00Hz
4096x2160PsF25.00Hz
4096x2160P23.98/24.00Hz
4096x2160PsF23.98/24.00Hz
Supported Signal Format
90
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI
(LevelA)
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE274M
3840x2160i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P50.00Hz 4:2:2YCbCr 12-bit
3840x2160i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF29.97/30.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF25.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF23.98/24.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1
SMPTE274M
4:2:2YCbCr 12-bit
4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4096x2160i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
Supported Signal Format
91
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI
(LevelA)
4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE2048-2
4096x2160i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE2048-2
4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE2048-2
4:2:2YCbCr 12-bit
Supported Signal Format
92
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI
2SampleInterleave
(LevelA)
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5
SMPTE274M
3840x2160P50.00Hz 4:2:2YCbCr 10-bit
3840x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4096x2160P50.00Hz 4:2:2YCbCr 10-bit
4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit
4096x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
QuadLink3G-SDI
(LevelB)
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE274M
3840x2160i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P50.00Hz 4:2:2YCbCr 10-bit
Supported Signal Format
93
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI
(LevelB)
3840x2160i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE274M
4:2:2YCbCr 12-bit
3840x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4096x2160i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4096x2160i50.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
Supported Signal Format
94
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI
(LevelB)
4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
Supported Signal Format
95
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI
(LevelB)
4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1
SMPTE372
SMPTE2048-2
4:2:2YCbCr 12-bit
QuadLink3G-SDI
2SampleInterleave
(LevelB)
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5
SMPTE372
SMPTE274M
3840x2160P50.00Hz 4:2:2YCbCr 10-bit
3840x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5
SMPTE372
SMPTE428-9
SMPTE428-19
SMPTE2048-2
4096x2160P50.00Hz 4:2:2YCbCr 10-bit
4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit
4096x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
6G-SDI 3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE2081-10
3840x2160P25.00Hz
3840x2160P23.98/24.00Hz
4096x2160P25.00Hz
4096x2160P23.98/24.00Hz
DualLink6G-SDI
SquareDivision,
2SampleInterleave
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE2081-11
3840x2160P50.00Hz
Supported Signal Format
96
Transmission method Signal format Color format Color depth Standards
12G-SDI 3840x2160P29.97/30.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit SMPTE2082-10
4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P25.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB
4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z'
4:2:2YCbCr
12-bit
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit
3840x2160P50.00Hz
4096x2160P47.95/48.00Hz
4096x2160P59.94/60.00Hz
4096x2160P50.00Hz
Supported Signal Format
97
RAW
Signal format
3840x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz
4096x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz
HDMI
Signal format Color format/Color depth
640x480P59.94/60.00Hz 4:4:4RGB8-bit
800x600P60.00Hz
1024x768P60.00Hz
720x480P59.94/60.00Hz 4:4:4RGB12-bit/10-bit/8-bit
4:4:4YCbCr12-bit/10-bit/8-bit
4:2:2YCbCr12-bit
720x576P50.00Hz
1280x720P59.94/60.00Hz
1280x720P50.00Hz
1920x1080P59.94/60.00Hz
1920x1080i59.94/60.00Hz
1920x1080P50.00Hz
1920x1080i50.00Hz
1920x1080P29.97/30.00Hz
1920x1080P25.00Hz
1920x1080P23.98/24.00Hz
2048x1080P59.94/60.00Hz
2048x1080P50.00Hz
2048x1080P29.97/30.00Hz
2048x1080P25.00Hz
2048x1080P23.98/24.00Hz
3840x2160P59.94/60.00Hz 4:4:4RGB8-bit
4:4:4YCbCr8-bit
4:2:2YCbCr12-bit
4:2:0YCbCr12-bit/10-bit/8-bit
3840x2160P50.00Hz
3840x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit
4:4:4YCbCr12-bit/10-bit/8-bit
4:2:2YCbCr12-bit
3840x2160P25.00Hz
3840x2160P23.98/24.00Hz
4096x2160P59.94/60.00Hz 4:4:4RGB8-bit
4:4:4YCbCr8-bit
4:2:2YCbCr12-bit
4:2:0YCbCr12-bit/10-bit/8-bit
4096x2160P50.00Hz
4096x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit
4:4:4YCbCr12-bit/10-bit/8-bit
4:2:2YCbCr12-bit
4096x2160P25.00Hz
4096x2160P23.98/24.00Hz
98
Image/FrameDisplay
SDI
Signal system Display Method
720x487 59.94/60.00 i 59.94/60.00 P
720x576 50.00 i 50.00 P
1280x720 23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
1920x1080 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
2048x1080 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
47.95/48.00 P 47.95/48.00 P
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
Image/Frame Display
99
Signal system Display Method
3840x2160 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
4096x2160 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
47.95/48.00 P 47.95/48.00 P
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
*:Displayingsameframe
Image/Frame Display
100
HDMI
Signal system Display Method
640x480 59.94/60.00 P 59.94/60.00 P
800x600 60.00 P 60.00 P
720x480 59.94/60.00 P 59.94/60.00 P
720x576 50.00 P 50.00 P
1024x768 60.00 P 60.00 P
1280x720 59.94/60.00 P 59.94/60.00 P
1280x720 50.00 P 50.00 P
1920x1080 59.94/60.00 P 59.94/60.00 P
1920x1080 59.94/60.00 i 59.94/60.00 P
1920x1080 50.00 P 50.00 P
1920x1080 50.00 i 50.00 P
1920x1080 29.97/30.00 P 59.94/60.00 P*
1920x1080 25.00 P 50.00 P*
1920x1080 23.98/24.00 P 47.96/48.00 P*
2048x1080 59.94/60.00 P 59.94/60.00 P
2048x1080 50.00 P 50.00 P
2048x1080 29.97/30.00 P 59.94/60.00 P*
2048x1080 25.00 P 50.00 P*
2048x1080 23.98/24.00 P 47.96/48.00 P*
3840x2160 59.94/60.00 P 59.94/60.00 P
3840x2160 50.00 P 50.00 P
3840x2160 29.97/30.00 P 59.94/60.00 P*
3840x2160 25.00 P 50.00 P*
3840x2160 23.98/24.00 P 47.96/48.00 P*
4096x2160 59.94/60.00 P 59.94/60.00 P
4096x2160 50.00 P 50.00 P
4096x2160 29.97/30.00 P 59.94/60.00 P*
4096x2160 25.00 P 50.00 P*
4096x2160 23.98/24.00 P 47.96/48.00 P*
*:Displayingsameframe
101
ErrorMessages
Message Description and Action
Network Communicationerror. IPaddressmaybeinconictortheremaybea
networkcommunicationerror.Checkthenetwork
environment.
InvalidIPAddress. EnterthecorrectIPaddress.
InvalidSubnetMask. Enterthecorrectsubnetmask.
Displayisnotconnected. CheckthattheCanondisplaytowhichyouwishto
exportthisvideodisplay'ssettingsandthisvideo
displayarecorrectlyconnectedwithaLANcable.
Varioussettings,
CDLexport
TheUSBmemoryisfull. UseanotherUSBmemoryordeletethecontentof
thememory.
Failedtowritele. TheUSBmemorymaybedefectiveorprotected.
ChecktheUSBmemory.
LUT,Varioussettings,
CDLimport
(LUTImport)"LUTType"isdifferent.
(CDLImport)"FileType"isdifferent.
Selectthecorrectleformat.
Failedtoreadle. TheUSBmemorymaybedefectiveorprotected.
ChecktheUSBmemory.
Failedtoimport. Thereisanerrorintheletobeimported.Checkthe
le.
Noimportle. Checkandensurethatthelehasbeensavedtothe
USBmemoryorimportedto[User1]to[User3].
ScreenCapture Failedtocapture. TheUSBmemorymaybedefectiveorprotected.
ChecktheUSBmemory.
InvalidSignal. Ascreendisplayingnovideoisbeingcapturedfor
examplethereisnosignaloranunsupportedsignal
isbeinginput.Checkthesignal,inputitagain,and
captureit.
Copyprotectedsignal. Thesignalyoutriedtocapturemaybeprotectedby
HDCP2.2whichisacopypreventionstandardfor
HDMI.Inthiscase,thesignalcannotbecaptured.
ChecktheHDMIsignal.
Failedtoplaybackle. TheUSBmemoryorthelemaybedefectiveor
protected.ChecktheUSBmemoryorthele.
Nocapturele. Checkandensurethatthelehasbeensavedtothe
USBmemory.
Error Messages
102
Message Description and Action
Hardwareerror Backlighterror. Disconnectthepowercord,reconnectit,andthen
turnonthepower.
Ifthemessagepersists,contactCanonCustomer
Center.
Fanerror.
Panelerror.
I/Ferror.
Systemerror.
Inputsignal NoSignal Displayedwhenthereisnovideosignalinput.
Unsupported Unsupportedvideosignalisinput.Checkthe
supportedsignalformat(
83).
Operation Invalidoperation. Operationisdisabled.Checkthesettingitems.
"ProtectSettings"ison. TousetheOSDmenu,movetheselectionframe
to[Protect]andpressthejogdialforapproximately3
seconds.
"CDL/UserLUTBypass"ison. When[CDL/UserLUTBypass]isturned[On],you
cannotadjust[Power],[Saturation],[Offset],or
[Slope].
InvalidPassword. Enterthecorrectpassword.
USBmemory USBmemoryisnotconnected. CorrectlyconnecttheUSBmemorytotheUSBport
ofthismainunit.
UnsupportedUSBmemory. ChecktheUSBmemoryformatandmakesureitis
notprotected.
Wi-Fiadapter Wi-FiAdaptorisnotconnected. CorrectlyconnecttheWi-FiadaptertotheUSB
terminalofthevideodisplay.
FailedtoconnectWi-FiAccessPoint. Thepasswordmaybewrong,ortheremaybea
networkcommunicationerror.Checkthenetwork
environment.
FirmwareUpdate Noupdatele. FirmwareupdatelesarenotsavedonUSBmemory
orothermedia.
Failedtoreadupdatele. Thereisanerrorinthele.Checkthele.
Thermware/licensehasbeenalreadyupdated. Thisisthelethatisupdatedonthevideodisplay.
103
Troubleshooting
Symptom Cause and Action
Powerdoesnotturnon.
(Powerindicatordoesnotturnon.)
• Pressthe
button.
• CheckthattheACpowercordisconnectedcorrectly.
• Brightnessofthepowerindicatormaybeturnedoff.Turnitonand
checkoncemore.
—
77
Thescreenisdark. Whenthepowerindicatordoesnotturnon:
• Pressthe
button.
• CheckthattheACpowercordisconnectedcorrectly.
—
Whenthepowerindicatorislitorange:
• Pressthe
button.
—
Whenthepowerindicatorisashingorange:
• Flashingonceevery3seconds: ContactCanonCustomerCenter.
• Flashingtwiceevery3seconds:
-Turnonthepowerwiththe
button.
-Thetemperatureofthedisplayrises(orfalls)dependonoperation
environment.Checktheenvironmentalconditionsanddonotusein
directsunlight.
-Ifthepowerstilldoesnotturnon,contactCanonCustomerCenter.
—
Theimagedoesnotdisplay. • Seteachitemin[ChannelSettings]accordingtoinputsignal. 41
The3G-SDIRAWsignalimagedoesnot
display.
• Attimesthe3G-SDIRAWsignalimagemaynotdisplay,dependingon
thetypeoftheCinemaEOScamera.RefertotheCanonwebsitefora
listofsupportedproducts.
—
ThereisablankareawhensettoQuad
Input/DualInput.
• Theremaybenoinputsignal.Checkthesignal.
• Somecombinationsarenotsupported.Checkthesignal.
44
82
Theimageappearstobedelayed. • When[ReduceBacklightFlash]issetto[On],thedisplayedimagemay
bedelayeddependingonthescene.Insuchcase,changethesettingto
[Off].
77
Videopausedtemporarily Thescreenmaypausewhenrunning[Capture]viaawebbrowser.When
[Capture]iscomplete,orturning[Web]
[Control]to[Off]willreturnto
normalscreen.
22
73
Troubleshooting
104
Symptom Cause and Action
Screenistoobright/dark. • Adjustthe[Contrast]ontheOSDmenu.
• ThereisalimitontheservicelifeofLCDbacklight.Ifthescreen
becomesdarkorstartsickering,contactCanonCustomerCenter.
25
Burn-inimageappears. • ThisisacharacteristicoftheLCDpanelandyoushouldavoiddisplaying
stationaryimageforalongtime.
—
Thereisanunlitorred,blue,green,or
whitedotonscreen.
• LCDdisplayismadeofveryhighprecisiontechnology.Ithaseffective
pixelsof99.99%ormore,buttheremaybeblackdotsorred,blue,or
greendotsthatmaybealwayson.Thisisnotafailure.
—
Thereisaninterferencepatternortrace
thatremainswhentheLCDpanelis
pressed.
• Thesymptommayberesolvedbydisplayingawhiteorblackimageon
theentirescreen. —
OSDmenucannotbeused. • Checkthat[ProtectSettings]isnotset. 76
[AspectMarker],[SafetyZoneMarker]or
[AreaMarker]doesnotappear.
• Achannelwithnosignal,unsupportedsignal,orwith[Input
Conguration]notsetmaybeselected.Checkthesignal.
82
Loudfannoise • Whenhigh-luminancecontentisdisplayedcontinuously,thetemperature
insidethemainunitriseseveniftheoperatingtemperatureiswithin
therecommendedrange,andthefanoperatesatafasterspeedthan
usualtolowertheinternaltemperature.Itisrecommendedtolowerthe
brightnessofthevideodisplay.
—
Youforgotthepasswordfor[Protect
Settings].
• Pressthejogdialandthe
buttonwhilethevideodisplayisinstandby.
Thecongurationwillberesettothestatewherenopasswordisset.
—
Thevideodisplaydoesnotstartupinthe
conditionthatthepowerwasturnedoff
lasttime.
• Checkthe[PoweronSetting]ontheOSDmenu.Set[Lastmemory]to
startupthevideodisplayintheconditionthatthepoweristurnedofflast
time.
78
TheimagequalityfortheUsermodein
[PictureMode]differsfromtheimage
qualityofpresets.
• Selectthepresetmodeby[CopyPictureMode]andcopythesettings. 33
Imagequalityontheleftandrightscreens
isdifferent.
• Checkthe[ChannelSettings]
[PictureMode]settings. 8
43
Imagequalityisautomaticallychanged.
Thesameimageisdisplayedintwo
screens.
• Checkthe[ChannelSettings]
[SingleInputDualView]settings. 44
105
SoftwareUsedinThisProduct
SoftwareinstalledwiththisproductincludessoftwaremodulesfromCanonorthirdparties.
Software Developed by Canon and Free Software
SoftwaredevelopedorcreatedbyCanonandaccompanyingdocumentisprotectedbycopyrightlaw,termsofan
internationalconventionandanyothergoverninglaws.
Thisproductusessoftwaremodulesundercopyrightbythirdpartiesanddistributedasfreesoftware.Someofthese
softwaremodulesaresubjecttotheGNUGeneralPublicLicensev2(GPL),GNULesserGeneralPublicLicensev2.1
(LGPL)oranyotherlicense.
Free software modules installed with this product
•linuxkernel •busybox •glibc •JFFS2
•SquashFS •FUSE •libfuse •libupnp
•avahi-autoipd •libxml •zlib •libpng
•Newlib(libc) •Newlib(libm) •wireless_tools •wpa_supplicant
•openssl •libnl •RealTek_WiFi_linuxdriver
•dhcpd •hostapd
Acquiring Source Code for Free Software
Somefreesoftwarerequirestheacquirementofthesourcecodeofmodulesinordertodistributetheexecutableform
ofthosesoftwaremodules.Forinformationonhowtoacquirethesourcecodeforfreesoftwaresuchastheseand
conrmingtermsoftheGPL,LGPLandotherlicenseagreements,pleasecheckwiththedistributorfromwhomthe
productwaspurchased.
License Agreement for this Product
Obligation to Present License Agreement
Thecopyrightholdersofsoftwaremodulesinstalledwiththisproductrequireitslicenseagreementtobedisplayed.
Thislicenseagreementisasfollows:
■
libupnp License
Copyright(c)2000-2003IntelCorporationAllrightsreserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodication,arepermittedprovidedthatthe
followingconditionsaremet:
* Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimer.
* Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
* NeithernameofIntelCorporationnorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts
derivedfromthissoftwarewithoutspecicpriorwrittenpermission.
THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANYEXPRESS
ORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY
ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLINTELORCONTRIBUTORS
BELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES
(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE,
DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,
Software Used in This Product
106
WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGIN
ANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.
■
libxml License
Copyright(C)1998-2003DanielVeillard.AllRightsReserved.
Permissionisherebygranted,freeofcharge,toanypersonobtainingacopyofthissoftwareandassociated
documentationles(the"Software"),todealintheSoftwarewithoutrestriction,includingwithoutlimitationtherightsto
use,copy,modify,merge,publish,distribute,sublicense,and/orsellcopiesoftheSoftware,andtopermitpersonsto
whomtheSoftwareisfurnishedtodoso,subjecttothefollowingconditions:
Theabovecopyrightnoticeandthispermissionnoticeshallbeincludedinallcopiesorsubstantialportionsofthe
Software.
THESOFTWAREISPROVIDED"ASIS",WITHOUTWARRANTYOFANYKIND,EXPRESSORIMPLIED,INCLUDING
BUTNOTLIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORAPARTICULARPURPOSEAND
NONINFRINGEMENT.INNOEVENTSHALLTHEDANIELVEILLARDBELIABLEFORANYCLAIM,DAMAGESOR
OTHERLIABILITY,WHETHERINANACTIONOFCONTRACT,TORTOROTHERWISE,ARISINGFROM,OUTOFOR
INCONNECTIONWITHTHESOFTWAREORTHEUSEOROTHERDEALINGSINTHESOFTWARE.
Exceptascontainedinthisnotice,thenameofDanielVeillardshallnotbeusedinadvertisingorotherwisetopromote
thesale,useorotherdealingsinthisSoftwarewithoutpriorwrittenauthorizationfromhim.
■
Newlib(libc) License
Copyright(c)1990TheRegentsoftheUniversityofCalifornia.Allrightsreserved.
Redistributionanduseinsourceandbinaryformsarepermittedprovidedthattheabovecopyrightnoticeandthis
paragraphareduplicatedinallsuchformsandthatanydocumentation,andothermaterialsrelatedtosuchdistribution
anduseacknowledgethatthesoftwarewasdevelopedbytheUniversityofCalifornia,Berkeley.Thenameofthe
Universitymaynotbeusedtoendorseorpromoteproductsderivedfromthissoftwarewithoutspecicpriorwritten
permission.
THISSOFTWAREISPROVIDED"ASIS"ANDWITHOUTANYEXPRESSORIMPLIEDWARRANTIES,INCLUDING,
WITHOUTLIMITATION,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULAR
PURPOSE.
Copyright(c)1991,2000TheRegentsoftheUniversityofCalifornia.Allrightsreserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodication,arepermittedprovidedthatthe
followingconditionsaremet:
1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgement:
ThisproductincludessoftwaredevelopedbytheUniversityofCalifornia,Berkeleyanditscontributors.
4.NeitherthenameoftheUniversitynorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts
derivedfromthissoftwarewithoutspecicpriorwrittenpermission.
Software Used in This Product
107
THISSOFTWAREISPROVIDEDBYTHEREGENTSANDCONTRIBUTORS"ASIS"ANDANYEXPRESSOR
IMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY
ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEREGENTS
ORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR
CONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSOR
SERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDON
ANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCE
OROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHE
POSSIBILITYOFSUCHDAMAGE.
■
Newlib(libm) License
Copyright(C)1993bySunMicrosystems,Inc.Allrightsreserved.
DevelopedatSunPro,aSunMicrosystems,Inc.business.
Permissiontouse,copy,modify,anddistributethissoftwareisfreelygranted,providedthatthisnoticeispreserved.
■
openssl
Copyright(C)1998-2017TheOpenSSLProject.Allrightsreserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodication,arepermittedprovidedthatthe
followingconditionsaremet:
1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgment:
"ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit.(http://
www.openssl.org/)"
4.Thenames"OpenSSLToolkit"and"OpenSSLProject"mustnotbeusedtoendorseorpromoteproductsderived
fromthissoftwarewithoutpriorwrittenpermission.Forwrittenpermission,pleasecontactopenssl-core@openssl.
org.
5.Productsderivedfromthissoftwaremaynotbecalled"OpenSSL"normay"OpenSSL"appearintheirnames
withoutpriorwrittenpermissionoftheOpenSSLProject.
6.Redistributionsofanyformwhatsoevermustretainthefollowingacknowledgment:
"ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit(http://www.
openssl.org/)"
THISSOFTWAREISPROVIDEDBYTHEOpenSSLPROJECT"ASIS"ANDANYEXPRESSEDORIMPLIED
WARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYAND
FITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEOpenSSLPROJECT
ORITSCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR
CONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSOR
SERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDON
ANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCE
OROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHE
POSSIBILITYOFSUCHDAMAGE.
Copyright(C)1995-1998EricYoung(eay@cryptsoft.com)
Allrightsreserved.
Software Used in This Product
108
ThispackageisanSSLimplementationwrittenbyEricYoung(eay@cryptsoft.com).
TheimplementationwaswrittensoastoconformwithNetscapesSSL.
Thislibraryisfreeforcommercialandnon-commercialuseaslongasthefollowingconditionsareahearedto.The
followingconditionsapplytoallcodefoundinthisdistribution,beittheRC4,RSA,lhash,DES,etc.,code;notjustthe
SSLcode.TheSSLdocumentationincludedwiththisdistributioniscoveredbythesamecopyrighttermsexceptthat
theholderisTimHudson(tjh@cryptsoft.com).
CopyrightremainsEricYoung's,andassuchanyCopyrightnoticesinthecodearenottoberemoved.Ifthispackage
isusedinaproduct,EricYoungshouldbegivenattributionastheauthorofthepartsofthelibraryused.Thiscanbe
intheformofatextualmessageatprogramstartuporindocumentation(onlineortextual)providedwiththepackage.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodication,arepermittedprovidedthatthe
followingconditionsaremet:
1.Redistributionsofsourcecodemustretainthecopyrightnotice,thislistofconditionsandthefollowingdisclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgement:
"ThisproductincludescryptographicsoftwarewrittenbyEricYoung(eay@cryptsoft.com)"
Theword'cryptographic'canbeleftoutiftherouinesfromthelibrarybeingusedarenotcryptographicrelated:-).
4.IfyouincludeanyWindowsspeciccode(oraderivativethereof)fromtheappsdirectory(applicationcode)you
mustincludeanacknowledgement:
"ThisproductincludessoftwarewrittenbyTimHudson(tjh@cryptsoft.com)"
THISSOFTWAREISPROVIDEDBYERICYOUNG"ASIS"ANDANYEXPRESSORIMPLIEDWARRANTIES,
INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORA
PARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEAUTHORORCONTRIBUTORSBELIABLE
FORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING,
BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,OR
PROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERIN
CONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUT
OFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.
Thelicenceanddistributiontermsforanypublicallyavailableversionorderivativeofthiscodecannotbechanged.i.e.
thiscodecannotsimplybecopiedandputunderanotherdistributionlicence[includingtheGNUPublicLicence.]
■
wpa_supplicant, hostapd
Copyright(C)2002-2016,JouniMalinen<j@w1.>andcontributors
AllRightsReserved.
Thissoftwaremaybedistributed,used,andmodiedunderthetermsofBSDlicense:
Redistributionanduseinsourceandbinaryforms,withorwithoutmodication,arepermittedprovidedthatthe
followingconditionsaremet:
1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing
disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Neitherthename(s)oftheabove-listedcopyrightholder(s)northenamesofitscontributorsmaybeusedtoendorse
orpromoteproductsderivedfromthissoftwarewithoutspecicpriorwrittenpermission.
Software Used in This Product
109
THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANY
EXPRESSORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOF
MERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALL
THECOPYRIGHTOWNERORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,
EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOF
SUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)
HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT
(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVEN
IFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.
Copyright(c)2004-2014byInternetSystemsConsortium,Inc.("ISC")
Copyright(c)1995-2003byInternetSoftwareConsortium
Permissiontouse,copy,modify,anddistributethissoftwareforany
purposewithorwithoutfeeisherebygranted,providedthattheabove
copyrightnoticeandthispermissionnoticeappearinallcopies.
THESOFTWAREISPROVIDED"ASIS"ANDISCDISCLAIMSALLWARRANTIES
WITHREGARDTOTHISSOFTWAREINCLUDINGALLIMPLIEDWARRANTIESOF
MERCHANTABILITYANDFITNESS.INNOEVENTSHALLISCBELIABLEFOR
ANYSPECIAL,DIRECT,INDIRECT,ORCONSEQUENTIALDAMAGESORANYDAMAGES
WHATSOEVERRESULTINGFROMLOSSOFUSE,DATAORPROFITS,WHETHERINAN
ACTIONOFCONTRACT,NEGLIGENCEOROTHERTORTIOUSACTION,ARISINGOUT
OFORINCONNECTIONWITHTHEUSEORPERFORMANCEOFTHISSOFTWARE.
InternetSystemsConsortium,Inc.
950CharterStreet
RedwoodCity,CA94063
<info@isc.org>
https://www.isc.org/
110
Index
Number
2SampleInterleave................................................... 41
200%(ScreenScaling).............................................. 46
2020ConstantLuminance........................................ 32
2020GamutMapping............................................... 32
2020OutsideofGamutView..................................... 70
A
ACESproxy................................................................ 25
Adjustment................................................................ 25
AdobeRGB............................................................... 25
Anamorphic......................................................... 46,64
AnchorAdjustment................................................ 7,33
AreaMarker............................................................... 54
AreaMarker(CameraLink)........................................ 64
AspectMarker........................................................... 51
AudioInput................................................................ 42
AudioLevelMeter...................................................... 56
AudioSettings........................................................... 50
AutomaticAdjustment
(CINEMAEOS/ARRI/VARICAM)................................. 63
B
BackgroundColor..................................................... 48
BacklightControl................................................. 25,77
Banner...................................................................... 76
BiasR/G/B................................................................ 26
Bicubic...................................................................... 47
Black(TestPattern).................................................... 62
BlueOff..................................................................... 71
BlueOnly................................................................... 71
Brightness................................................................. 25
ButtonNameLightingTime....................................... 77
C
CameraInformation................................................... 64
CameraLink.............................................................. 63
CanonLog,CanonLog2,CanonLog3..................... 27
CDLExport/CDLImport............................................ 12
CDL/UserLUT........................................................... 30
CDL/UserLUTBypass.............................................. 30
CenterMarker........................................................... 54
ChannelName........................................................... 43
ChannelSettings....................................................... 41
Chroma..................................................................... 25
CINEMAEOSSYSTEM(PictureMode)...................... 25
CinemaGamutto709............................................... 26
CinemaGamutto2020............................................. 26
CinemaGamuttoDCI............................................... 26
ColorBars(TestPattern)............................................ 62
ColorGamut.............................................................. 26
ColorRange.............................................................. 29
ColorTemperature..................................................... 26
CompareView........................................................... 71
CompatibleSettings.................................................. 77
Contrast.................................................................... 25
CopyPictureMode.................................................... 33
Custom(xy)(ColorTemperature)................................ 26
D
Date/Time........................................................... 13,75
DCI-P3...................................................................... 25
DCI-P3+to709......................................................... 26
DCI-P3+toDCI......................................................... 26
DetailSettings
Adjustment............................................................ 31
CDL/UserLUT....................................................... 30
DisplayButtonLED................................................... 77
DisplayChannel......................................................... 75
DisplayFunction/DisplayFunction(CDL).................... 75
DisplayName............................................................ 76
DisplaySettingLink................................................... 74
DisplaySettings......................................................... 46
DualInput.................................................................. 41
DualLink3G-SDI....................................................... 41
E
EBU........................................................................... 25
Export/Import...................................................... 11,78
F
FalseColor................................................................ 69
FilmCadence............................................................ 48
Firmware/LicenseUpdate.......................................... 77
Firmware/LicenseVer................................................. 82
Format....................................................................... 42
111
FrameHold............................................................... 48
FrameLuminanceMonitor......................................... 60
FunctionButtonGuide............................................... 76
Function/ChannelButton........................................... 75
FunctionSettings....................................................... 56
G
GainR/G/B................................................................ 26
Gamma/EOTF........................................................... 27
GammaLUT.............................................................. 27
GamutLUT................................................................ 26
Gray(TestPattern)..................................................... 62
GreenOff................................................................... 71
GridMarker............................................................... 55
H
HDMI................................................................. 97,100
HDMILink................................................................. 33
HDRRange............................................................... 28
HDR/SDRView......................................................... 32
HideOSD.................................................................. 81
Histogram.................................................................. 59
HybridLog-Gamma................................................... 27
HybridLog-GammaSystem...................................... 32
I
ImageDivision........................................................... 41
ImagePriority............................................................ 48
InMonitorDisplay...................................................... 74
InputConguration.................................................... 41
InputTransform......................................................... 29
InternalSync............................................................. 43
I/PConversion........................................................... 48
I/PsF.......................................................................... 48
ITU-RBT.709............................................................. 25
ITU-RBT.1886........................................................... 27
ITU-RBT.2020........................................................... 25
L
Language.................................................................. 75
LAN(Network/IMDSettings)...................................... 73
LinkOrder................................................................. 42
LocalDimming.......................................................... 25
LTC........................................................................... 56
LUTImport.......................................................... 10,31
M
MACAddress............................................................ 82
MarkerPreset............................................................ 51
MarkerSettings......................................................... 51
Marker/TC/CameraInfoInput..................................... 42
Monochrome............................................................. 71
MultiView(Dual/Quad).............................................. 41
N
NativeInputResolution(ScreenScaling).................... 46
NearestNeighbor...................................................... 47
Network/IMDSettings............................................... 73
O
Offset........................................................................ 30
OSDBrightness......................................................... 76
OSDMenu............................................................ 4,25
OSDPosition............................................................. 76
OSDSettings............................................................. 76
OSDSize................................................................... 76
OutputTransform...................................................... 29
OutputTransformSurround....................................... 29
OverRange............................................................... 70
P
Password............................................................ 73,76
Peaking..................................................................... 69
PictureFunctionSettings........................................... 69
PictureMode....................................................... 25,43
PixelValueCheck...................................................... 61
PLUGE(TestPattern)................................................. 62
Power........................................................................ 30
PowerIndicatorBrightness........................................ 77
PowerIndicator/ButtonLEDSettings......................... 77
PoweronSetting....................................................... 78
ProtectSettings......................................................... 76
PsF............................................................................ 48
Q
QuadInput................................................................ 41
112
R
Ramp(TestPattern)................................................... 62
RAW.......................................................................... 97
RedOff...................................................................... 71
ReduceBacklightFlash............................................. 77
Remote(GPI).............................................................. 75
Reset......................................................................... 33
ResetAllSettings...................................................... 78
S
SafetyZoneMarker1,2............................................ 52
Saturation.................................................................. 30
ScalingMethod......................................................... 47
ScreenCapture......................................................... 63
ScreenScaling.......................................................... 46
SDI...................................................................... 83,98
SelectChannel.......................................................... 41
SelectInputSignal..................................................... 41
Separator.................................................................. 44
SerialNo.................................................................... 82
ShapeTrace.............................................................. 47
Sharpness................................................................. 25
SignalInformation...................................................... 82
SignalMonitoring....................................................... 62
SingleInput............................................................... 41
SingleInputDualView............................................... 44
Slope......................................................................... 30
SMPTE-C.................................................................. 25
SpeedPriority............................................................ 48
SquareDivision.......................................................... 41
SubnetMask............................................................. 73
SystemInformation.................................................... 82
SystemSettings........................................................ 75
T
TestPattern............................................................... 62
TimeCode................................................................ 56
U
UsageTime............................................................... 82
User1–7.................................................................... 25
UserLUT............................................................. 30,77
V
VectorScope............................................................. 58
VideoPosition(MultiView)......................................... 47
VITC.......................................................................... 56
W
WaveFormMonitor................................................... 57
Web.................................................................... 22,73
White(TestPattern)................................................... 62
Wi-Fi.................................................................... 20,73
Y
YCbCrColorMatrix................................................... 32
Z
Zoom........................................................................ 47
MIE-0023-000 © CANON INC. 2019
The information in this document is verified as of August 2019. Subject to change without notice.
Visit your local Canon website to download the latest version.
USA http://pro.usa.canon.com
CANON U.S.A., INC.
http://pro.usa.canon.com/support
(855) 4K-CANON (855-452-2666)
(USA only)
UNITED KINGDOM
Canon UK Ltd
Unit 160, Centennial Park, Centennial Avenue,
Elstree, Hertfordshire, WD6 3SG
020-7660-0186
Canon Inc.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Europa N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon DP-V3120 - Video Display at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon DP-V3120 - Video Display in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon DP-V3120 - Video Display

Canon DP-V3120 - Video Display Installation Guide - English - 23 pages

Canon DP-V3120 - Video Display Installation Guide - German - 19 pages

Canon DP-V3120 - Video Display User Manual - German - 113 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info