100380
7
Zoom out
Zoom in
Previous page
1/163
Next page
DIGITAL CAMERA
Camera User Guide
Please read the Read This First section (p. 7).
Please also read the Software Starter Guide and the Direct Print User Guide.
CDI-E117-010 XXXXXXX © 2004 CANON INC. PRINTED IN JAPAN
Camera User Guide
ENGLISH
Flowchart and Reference Guides
Use of genuine Canon accessories is recommended.
This product is designed to perform optimally when used with
genuine Canon accessories. Canon shall not be liable for any damage
to this product and/or accidents such as fire, etc., caused by the
malfunction of non-genuine Canon accessories (e.g., a leakage and/
or explosion of a battery pack). Please note that this warranty does
not apply to repairs arising out of the malfunction of non-genuine
Canon accessories, although you may request such repairs on a
chargeable basis.
Shooting with the Camera
This Guide
This Guide
Software Starter Guide
Software Starter Guide
Direct Print User Guide
Printer User Guide
Installing the Software
Connecting the Camera to a Computer
Downloading Images to a Computer
Using the Printer and Printing
This Guide
1
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for
an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less
than 0.01% of the pixels may occasionally misfire or appear as red or black
dots. This has no effect on the recorded image and does not constitute a
malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region
before using it with a TV monitor (p. 127).
Charging the Date/Time Battery
The camera has a built-in rechargeable lithium battery that maintains the
date, time and other camera settings. This battery recharges when the
main battery pack is inserted into the camera. When you first purchase the
camera, place a charged battery pack in it or use the AC adapter kit (sold
separately) for at least 4 hours to charge the date/time battery. It will
charge even when the camera power is set to Off.
If the Date/Time menu appears when the camera power is turned on, it
means that the date/time battery charge is depleted. Recharge it as
described above.
2
About This Guide
Conventions Used in the Text
Question? Look Here First
What settings are available
under each function?
See Functions Available in Each
Shooting Mode (p. 160).
Will my settings remain in
effect even after I’ve turned
the camera off?
What can be accomplished
with each function?
See FUNC. MENU (p. 44).
See Rec. Menu (p. 47).
See Play Menu (p. 48).
See Set up Menu (p. 48).
See My Camera Menu (p. 51).
What do the icons listed in
the Camera User Guide
mean?
See Information Displayed on the
LCD Monitor (p. 35).
See Menu Settings and Factory
Defaults (p. 47).
: This mark denotes issues that may affect the camera’s operation.
: This mark denotes additional topics that complement the basic
operating procedures.
Icons on the right end of title bars show the applicable operating modes.
As in the example below, the procedure can be performed in (Auto),
(Manual), (Stitch Assist) or (Movie) mode.
Using the Self-timer
3
Preparing the Camera 18
Basic Functions 30
Shooting 53
Playback 89
Erasing 105
Print Settings/Transferring 108
Connecting the Camera to a Computer/TV
118
My Camera Settings 129
List of Messages
134
Troubleshooting 136
Appendix 140
Photo Tips and Information 153
Thumb Index
4
Read This First .................................................. 7
Please Read............................................................................................... 7
Safety Precautions..................................................................................... 8
Preventing Malfunctions .......................................................................... 13
Components Guide .............................................14
Preparing the Camera
Charging the Battery Pack ....................................................................... 18
Installing the Battery Pack ....................................................................... 21
Installing the CF Card .............................................................................. 23
Setting the Date and Time ....................................................................... 26
Setting the Language............................................................................... 28
Basic Functions
Turning the Power On.............................................................................. 30
Switching Between Shooting/Playback.................................................... 32
Using the LCD Monitor............................................................................ 33
Information Displayed on the LCD Monitor ............................................. 35
Using the Viewfinder ............................................................................... 39
Using the Zoom....................................................................................... 40
Pressing the Shutter Button .................................................................... 41
Selecting Menus and Settings ................................................................. 43
Menu Settings and Factory Defaults ........................................................ 47
Resetting Settings to Their Default Values............................................... 52
Shooting
Shooting in Auto Mode ..................................................................... 53
Reviewing an Image Right after Shooting................................................ 54
Changing Resolution/Compression Settings ........................................... 55
Quick Shots ............................................................................................. 57
Using the Flash ................................................................................... 58
Shooting Close-Ups/ Infinity Shots.............................................. 60
Using the Digital Zoom............................................................................ 62
Continuous Shooting ......................................................................... 63
Using the Self-timer........................................................................... 64
Shooting in Manual Mode............................................................... 66
Shooting Panoramic Images (Stitch Assist)..................................... 67
Table of Contents
Items marked with are lists or charts that summarize camera functions or
procedures.
5
Shooting a Movie............................................................................... 70
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) ........................ 72
Locking the Exposure Setting (AE Lock) .................................................. 74
Locking the Flash Exposure Setting (FE Lock) ......................................... 75
Switching between Focusing Modes........................................................ 76
Switching between Light Metering Modes ......................................... 77
Adjusting the Exposure Compensation .................................................... 78
Shooting in Long Shutter Mode ............................................................... 79
Adjusting the Tone (White Balance) ......................................................... 81
Changing the Photo Effect........................................................................ 84
Adjusting the ISO Speed .......................................................................... 85
Setting the Auto Rotate Function ............................................................. 86
Resetting the File Number........................................................................ 87
Playback
Displaying Images Individually................................................................. 89
Magnifying Images............................................................................. 90
Viewing Images in Sets of Nine (Index Playback) ............................ 91
Viewing Movies........................................................................................ 93
Editing Movies ......................................................................................... 95
Rotating Images in the Display ................................................................ 97
Attaching Sound Memos to Images......................................................... 98
Automated Playback (Slide Shows) ....................................................... 100
Protecting Images.................................................................................. 104
Erasing
Erasing Single Images ..................................................................... 105
Erasing All Images ................................................................................. 106
Formatting CF Cards .............................................................................. 107
Printing
About Printing........................................................................................ 108
Setting the DPOF Print Settings ............................................................. 110
Image Transmission Settings (DPOF Transfer Order)
Selecting Images for Transferring.......................................................... 116
Connecting the Camera to a Computer
Connecting the Camera to a Computer .................................................. 119
Computer System Requirements.................................................... 119
Downloading Images by Direct Transfer ................................................ 123
6
Connecting the Camera to the Computer to Download Images without
Installing Software.......................................................................... 125
Downloading Directly from a CF Card ....................................................126
Viewing Images on a TV set.................................... 127
Customizing the Camera (My Camera Settings)
Changing My Camera Settings .............................................................. 129
Registering My Camera Settings ........................................................... 131
List of Messages ............................................. 134
Troubleshooting .............................................. 136
Appendix
Using an AC Adapter Kit (Sold Separately) ............................................ 140
Using a Car Battery Charger (Sold Separately)...................................... 141
Camera Care and Maintenance .............................................................. 142
Specifications ........................................................................................ 143
Photo Tips and Information
Tip for Using the Self-timer ................................................................... 153
How to adjust the exposure ................................................................... 153
ISO Speed.............................................................................................. 154
Advanced Technique for the Macro mode ............................................. 154
Index ........................................................... 155
Functions Available in Each Shooting Mode ............. 160
7
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that
you shoot several trial images to confirm that the camera is operating and
being operated correctly.
Please note that Canon, its subsidiaries and affiliates, and its distributors
are not liable for any consequential damages arising from any malfunction
of a camera or accessory, including CF cards, that results in the failure of an
image to be recorded or to be recorded in a format that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from performances, exhibitions,
or commercial properties by means of a camera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If a problem
arises while the camera is in use abroad, please convey it back to the
country of sale before proceeding with a warranty claim to a Canon
Customer Support Help Desk.
For Canon Customer Support contacts, please see the Canon Limited
Warranty supplied with your camera.
8
Safety Precautions
Before using the camera, please ensure that you read and understand the
safety precautions described below. Always ensure that the camera is
operated correctly.
The safety precautions noted on the following pages are intended to
instruct you in the safe and correct operation of the camera and its
accessories to prevent injuries or damage to yourself, other persons and
equipment.
In the next few pages, the term “equipment” refers primarily to the camera
and its power supply accessories, such as the battery charger and
optional compact power adapter or car battery charger.
Warnings
Do not aim the camera directly into the sun or at other intense light
sources that could damage your eyesight.
Do not trigger the flash in close proximity to human or animal eyes.
Exposure to the intense light produced by the flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from infants
when using the flash.
Store this equipment out of the reach of children and infants. Accidental
damage to the camera or batteries by a child could result in serious injury.
In addition, placement of the strap around the child’s neck could result in
asphyxiation.
Do not attempt to disassemble or alter any part of the equipment that is
not expressly described in this guide. Disassembly or alteration may
result in high-voltage electrical shock. Internal inspections, alterations and
repairs should be conducted by qualified service personnel authorized by
your camera distributor or a Canon Customer Support Help Desk.
To avoid the risk of high-voltage electrical shock, do not touch the flash
portion of the camera if it has been damaged. Similarly, never touch
internal portions of the equipment that become exposed as a result of
damage. There is a risk of high-voltage electrical shock. Please take the
first opportunity to consult your camera distributor or the closest Canon
Customer Support Help Desk.
9
Stop operating the equipment immediately if it emits smoke or noxious
fumes. Failure to do so may result in fire or electrical shock. Immediately
turn the camera power off, remove the camera battery or unplug the
power cable from the power outlet. Confirm that smoke or fume
emissions have ceased. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
Stop operating the equipment if it is dropped or the casing is damaged.
Failure to do so may result in fire or electrical shock. Immediately turn the
camera power off, remove the camera battery or unplug the power cable
from the power outlet. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
Do not allow the equipment to come into contact with, or become
immersed in, water or other liquids. Do not allow liquids to enter the
interior. The camera has not been waterproofed. If the exterior comes into
contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If
water or other foreign substances enter the interior, immediately turn the
camera power off and remove the camera battery or unplug the power
cable from the power outlet. Continued use of the equipment may result in
fire or electrical shock. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
Do not use substances containing alcohol, benzene, thinners or other
flammable substances to clean or maintain the equipment. The use of
these substances may lead to fire.
Remove the power cable on a regular periodic basis and wipe away the
dust and dirt that collects on the plug, the exterior of the power outlet
and the surrounding area. In dusty, humid or greasy environments, the
dust that collects around the plug over long periods of time may become
saturated with humidity and short-circuit, leading to fire.
Do not cut, damage, alter or place heavy items on the power adapter
cable. Any of these actions may cause an electrical short circuit, which
may lead to fire or electrical shock.
Do not handle the power cable if your hands are wet. Handling it with
wet hands may lead to electrical shock. When unplugging the cable,
ensure that you hold the solid portion of the plug. Pulling on the flexible
portion of the cable may damage or expose the wire and insulation,
creating the potential for fires or electrical shocks.
10
Use only recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating,
distortion of the equipment, fire, electrical shock or other hazards.
Do not place the batteries near a heat source or expose them to direct
flame or heat. Neither should you immerse them in water. Such exposure
may damage the batteries and lead to the leakage of corrosive liquids, fire,
electrical shock, explosion or serious injury.
Do not attempt to disassemble, alter or apply heat to the batteries.
There is serious risk of injury due to an explosion. Immediately flush with
water any area of the body - including the eyes and mouth, or clothing -
that comes into contact with the inner contents of a battery. If the eyes or
mouth contact these substances, immediately flush with water and seek
medical assistance.
Avoid dropping or subjecting the batteries to severe impacts that could
damage the casings. It could lead to leakage and injury.
Do not short-circuit the battery terminals with metallic objects, such as
key holders. It could lead to overheating, burns and other injuries. Use
the supplied terminal cover to transport or store the battery pack.
Before you discard a battery, cover the terminals with tape or other
insulators to prevent direct contact with other objects. Contact with the
metallic components of other materials in waste containers may lead to
fire or explosions. Discard the batteries in specialized waste facilities if
available in your area.
Use only recommended batteries and accessories. Use of batteries not
expressly recommended for this equipment may cause explosions or
leaks, resulting in fire, injury and damage to the surroundings.
Use the specified battery charger to charge Battery Pack NB-1LH or NB-
1L. Use of other chargers may lead to overheating, distortion of the
equipment, fire or electrical shock.
Disconnect the battery charger and compact power adapter from both
the camera and the power outlet after recharging and when it is not in
use to avoid fire and other hazards. Continuous use over a long period
may cause a unit to overheat and distort, resulting in fire.
11
The camera terminals of the battery charger and compact power
adapter are designed for exclusive use with your camera. Do not use
them with other products or batteries. There is a risk of fire and other
hazards.
Caution about magnetic fields
Keep objects that are sensitive to magnetic fields (such as credit cards)
away from the speaker of the camera (p. 14). Such items may lose data
or stop working.
12
Cautions
Avoid using, placing or storing the equipment in places subject to
strong sunlight or high temperatures, such as the dashboard or trunk
(boot) of a car. Exposure to intense sunlight and heat may cause the
batteries to leak, overheat or explode, resulting in fire, burns or other
injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the battery charger to
charge the battery pack.
Do not store the equipment in humid or dusty areas. Storage in such
areas could lead to fire, electrical shock or other damage.
Be careful not to bang the camera or subject it to strong impacts or
shocks that could lead to injury or damage the equipment when
wearing or holding it by the strap.
Be careful not to cover the flash with your fingers or clothing when
shooting. The flash may be damaged and emit smoke or noise. In
addition, do not touch the surface of the flash after taking several pictures
in rapid succession. Either action could result in burns.
Do not operate the flash with dirt, dust or other items stuck to its lens.
The resulting heat build-up could damage the flash.
Ensure that the battery charger is plugged into a power outlet of the
specified rating, not over the specified rating. The plug of the battery
charger varies according to region.
Do not use the battery charger or compact power adapter if the plug or
cable is damaged, or if the plug is not fully inserted into the power
outlet.
Do not allow metal objects (such as pins or keys) or dirt to contact the
charger terminals or plug.
If your camera is used for prolonged periods, the camera body may
become warm. Please take care when operating the camera for extended
periods as your hands may experience a burning sensation.
13
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other
equipment generating strong electromagnetic fields. Exposure to strong
magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may
cause condensation (water droplets) to form on its external and internal
surfaces. You can avoid this by placing the equipment in an airtight,
resealable plastic bag and letting it adjust to temperature changes slowly
before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued
use may damage the equipment. Remove the CF card, battery pack or
compact power adapter from the camera and wait until the moisture
evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the
battery pack and store the equipment in a safe place. Storing the camera for
extended periods with a battery pack installed will run down the battery
pack and may damage the camera. The date, time and other camera settings
may reset to default settings if the battery pack has been removed for more
than three weeks. Follow the instructions in this guide to reset the desired
settings.
14
Components Guide
Front View
* Be careful not to wave the camera about or catch it on other items when
dangling it from the wrist strap.
AF-assist Beam (p. 42)
Red-eye Reduction Lamp (p. 58)
Self-timer Lamp (p. 64)
Flash (p. 58)
Lens
Microphone (p. 98)
Wrist Strap Mount
Attaching the Wrist Strap
*
Speaker
Viewfinder Window (p. 39)
Terminal Cover
DIGITAL Terminal (p. 120)
A/V Out (Audio/Video Out)
Terminal (p. 127)
15
Preparing the Camera
Back View
LCD Monitor (p. 33)
Tripod Socket
CF Card Slot Cover (p. 23)
Battery Cover (p. 21)
Viewfinder (p. 39)
DC Coupler Terminal
Cover (p. 140)
Lock for the CF Card Slot
Cover (p. 23)
The following cables are used to connect the camera to a computer or
printer.
Computer (p. 118)
Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (Sold Separately)
CP Printers
Interface Cable IFC-400PCU (supplied with camera) or the Direct
Interface Cable DIF-100 (supplied with the CP-100/CP-10).
Bubble Jet Printers
- Bubble Jet Direct Compatible Printers:
Please refer to your Bubble Jet printer user guide.
- PictBridge Compliant Printers:
Interface Cable IFC-400PCU (supplied with the camera)
PictBridge Compliant Non-Canon Printers:
Interface Cable IFC-400PCU (supplied with the camera)
Please refer to the System Map or the Direct Print User Guide supplied
with the camera for direct print compatible printer information
.
16
Operation Panel
Power Lamp
Lights when the power is on or transmission preparations
are complete when connected to a computer
Shutter Button (p. 41)
(Light Metering) Button (p. 77)/
Button
(Flash) Button (p. 58)/
Button
(Continuous) Button
(p. 63)/
(Self-timer)
Button (p. 64)/
Button
Shooting Mode Dial (p. 53)
(Macro) / (Infinity) Button
(p. 60)/
Button
SET Button
MENU Button
Indicators (p. 17)
ON/OFF Button (p. 30)
Zoom Lever
Shooting:
(Telephoto)/
(Wide Angle) (p. 40)
Replay:
(Magnify) (p. 90)/
(Index) (p. 91)
Mode Switch (p. 32)
Print/Share Button
(See below)
FUNC. (Function) Button (p. 43)/
(Single Image Erase) Button
(p. 105)
DISP. (Display) Button (p. 33)
The following operations are accessible through one easy press of the
(Print/Share) button.
Printing: See the Direct Print User Guide (separate from this guide)
Downloading images (Windows only): See p.118 of this guide and the
Software Starter Guide (separate from this guide)
The indicator blinks or lights during a printer or computer connection.
Blue: Ready to print/Ready to transfer images
Blinking blue: Printing/Transferring
17
Preparing the Camera
Indicator
The indicator lights or blinks when the ON/OFF button or shutter button is
pressed.
Upper Indicator
Green: Ready to shoot
Blinking Green: Recording to CF card / Reading CF card / Erasing from CF
card/Transmitting data (during a computer connection)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
Lower Indicator
Yellow: Macro mode / Infinity mode/ AF lock
Blinking Yellow: Focusing difficulty (single beep).
Although you can still press the shutter button when the
indicator blinks yellow, you are recommended to shoot
using the focus lock or AF lock (p. 72).
18
Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time you
use the camera or when the “Change the battery pack” message displays.
To protect the battery pack and prolong its life, do not charge it for
longer than 24 hours continuously.
1
Insert the battery pack into the
battery charger.
Align the battery pack according to the
arrows on the battery and the charger.
Insert the battery securely.
2
Battery charger model names and types
vary by region.
(For CB-2LS)
Plug the battery charger into a
power outlet.
(For CB-2LSE)
Attach the power cord to the battery
charger and plug it into a power outlet.
The charge indicator will light red while
the battery pack is charging. It will change
to green when the charge is complete.
After charging, unplug the battery charger
and remove the battery pack.
Charge Indicator
19
Preparing the Camera
• Since this is a lithium ion battery pack, you need not completely
discharge it before recharging. It can be recharged at any point.
However, since the maximum number of charge cycles is
approximately 300 times (battery life), you are recommended to
charge the battery pack after having discharged it completely to
prolong battery life.
• It takes approximately 130 minutes to fully charge the battery pack
from a fully discharged state (based on Canon’s testing standard).
Charging it within a temperature range of 5° to 40 °C (41° to 104 °F)
is recommended.
• Charge times may vary according to the ambient temperature and
the battery pack’s charge state.
•See Battery Capacity (p. 147).
• You may hear a noise during charging. This is not a malfunction.
Handling Precautions
zKeep the battery pack terminals ( ) clean at all times. Dirty
terminals may cause poor contact between the battery pack and camera.
Polish the terminals with a tissue or a dry cloth before charging or using
the battery pack.
zDo not rapidly overturn or wave the battery charger around when it
contains the battery pack. The battery pack could fly out.
zAt low temperatures, battery pack performance may be reduced and the
low battery icon may appear earlier than usual. Under these conditions,
resuscitate the battery pack by warming it in a pocket immediately before
use. However, ensure that there are no metallic items in the pocket that
could cause a short circuit, such as a key holder, etc.
zDo not place anything, such as tablecloths, carpets, bedding or cushions,
on top of the battery charger while it is charging. Heat will build up and
could result in a fire.
zDo not charge batteries other than Battery Pack NB-1LH or NB-1L in this
charger.
zThe battery pack continues to discharge a minimal portion of its power
while installed in the camera, even with the power off, or in the charger.
This will shorten battery life.
20
zDo not allow any metal objects
such as key rings to touch the
and terminals (Fig. A), as this
can damage the battery pack. To
carry the battery pack or store it
during periods of disuse, always
replace the terminal cover (Fig. B).
zEven charged battery packs
continue to discharge naturally.
You are advised to charge the
battery on the day of use, or one
day before, to ensure a full charge.
zSince storing a fully charged battery pack for long periods of time (about 1
year) can shorten its life cycle or affect performance, you are
recommended to use the battery pack in the camera until it is completely
discharged and to store it at normal temperature (23 °C/73 °F) or lower. If
you do not use the battery pack for long periods of time, charge it fully and
discharge it fully in the camera at least once a year before returning it to
storage.
zIf the performance of the battery pack diminishes substantially even when it
is fully charged, its life has been exceeded and it should be replaced.
Fig. A Fig. B
21
Preparing the Camera
Installing the Battery Pack
Install Battery Pack NB-1LH (supplied) as shown below. Battery Pack NB-1L
can also be used with the camera.
Please recharge the battery pack (p. 18)
before you use it for the first
time.
1
Slide the battery cover in the
direction of the arrows.
2
Press the battery lock while
inserting the battery pack all the
way in until the lock clicks.
Insert the battery pack correctly by
aligning the arrows on the camera and the
battery pack.
To remove the battery pack, press the
battery lock and pull the battery pack out.
3
Slide the battery cover closed.
1
2
Battery Lock
1
2
22
Do not turn off the power or open the battery cover while the upper
indicator beside the viewfinder blinks green. The camera is writing,
reading, erasing or transmitting an image to or from the CF card.
Remove the battery pack when the camera is not in use. Please
note, however, that the date, time and other camera settings may
reset to the default settings if the battery pack has been removed for
more than three weeks.
Please use an AC Adapter Kit ACK500 (sold separately) for extended
use of the camera (p. 140).
Battery Pack Charge
The following icons and messages will display when the battery pack charge
is low.
See Battery Capacity (p. 147).
Battery pack charge is low. Recharge it as soon as possible
before it is required for an extended period.
When the LCD monitor is off, this icon will display when
you press any button other than the ON/OFF, SET or
MENU button.
Change the
battery pack
Battery charge is insufficient to operate the camera. Replace
the battery pack immediately.
23
Preparing the Camera
Installing the CF Card
Turn the camera power off and insert the CF card with the following
procedures.
To remove the CF card
Push the eject button and pull the CF card
out.
1
Slide the lock up and open the CF
card slot cover.
2
Insert the CF card with its label
facing upward until the CF card
eject button fully extends.
Insert the card firmly into the slot, following
the diagram on the CF card slot cover.
3
Close the CF card slot cover.
1
2
Label
CF Card Eject Button
24
Since the camera is writing, reading, erasing or transmitting data to
or from the CF card when the upper indicator beside the viewfinder
blinks green, never perform the following actions during this time. It
could corrupt the image data.
- Subject the camera body to vibration or shocks.
- Turn the camera’s power off, or open the battery cover or CF card
slot cover.
Please note that CF cards formatted with other manufacturers’
cameras or a computer, or formatted or edited with application
programs, may slow down writing to the CF card or may not operate
correctly in the camera.
You are recommended to use CF cards that have been formatted in
your camera (p. 107). The card supplied with the camera may be
used without further formatting.
See CF Cards and Estimated Capacities (p. 148).
25
Preparing the Camera
Handling Precautions for CF Cards
zCF cards are high-precision electronic devices. Do not bend them, apply
force to them, or subject them to shocks or vibration.
zDo not attempt to disassemble or alter the CF card.
zMoving a CF card rapidly between temperature extremes will cause
condensation to form in the card and lead to a malfunction. To avoid
condensation, place the CF card in a sealed plastic bag before moving it
into a different temperature zone and allow it to adjust slowly to the new
temperature.
zIf condensation forms on the CF card, store it at room temperature until the
water droplets have evaporated naturally.
zDo not use or store CF cards in the following locations.
- Locations subject to dust or sand
- Locations subject to high humidity and high temperatures
26
Setting the Date and Time
The Date/Time menu will appear the first time the camera power is turned
on or whenever the built-in rechargeable lithium date/time battery charge is
low. Start from Step 5 to set the date and time.
1
Press the ON/OFF button until the
power lamp lights.
2
Press the MENU button.
The (Rec.) or (Play) menu is
displayed.
3
Use the or button to select the
(Set up) menu.
4
Use the or button to select
and press the SET button.
Power Lamp
27
Preparing the Camera
• Please note that the date and time settings may reset to the default
settings if the camera battery has been removed for more than three
weeks. Reset them when this occurs.
• Setting the date and time settings does not cause the date/time
stamp to appear on images. For printing images with the date on
them, refer to the Direct Print User Guide or Software Starter Guide.
Charging the Date/Time Battery
- The camera has a built-in rechargeable lithium battery for saving
settings such as the date and time. This battery is recharged by
the battery pack while it is in the camera. Right after purchasing
the camera, leave a charged battery pack in the camera, or plug
in AC Adapter Kit ACK500 (sold separately), for about 4 hours to
charge the date/time battery. It will charge even when the camera
power is turned off.
- If the Date/Time menu appears when the camera power is turned
on, the date/time battery charge is low. Use the above method to
recharge it.
5
Set the date and time.
Use the or button to select a field
(year, month, day, hour, minute and date
format).
Use the or button to change its
value.
6
Press the SET button.
The setting is complete.
7
Press the MENU button.
The display will return to the Shooting or
Playback screen.
28
Setting the Language
Use this feature to select the language for the LCD monitor display.
1
Press the ON/OFF button until the
power lamp lights.
2
Press the MENU button.
The (Rec.) or (Play) menu is
displayed.
3
Use the or button to select the
(Set up) menu.
4
Use the or button to select
and press the SET button.
Power Lamp
29
Preparing the Camera
The Language menu can also be displayed in playback mode by
holding down the SET button and pressing the MENU button. This
function cannot be used while a movie clip is played back, or a
separately sold printer is connected to the camera.
5
Use the , , or button to
select a language and press the
SET button.
6
Press the MENU button.
The display will return to the Shooting or
Playback screen.
30
Basic Functions
Turning the Power On
To turn the power off
Press the ON/OFF button again.
The Date/Time menu will appear the first time the camera power is
turned on or whenever the built-in rechargeable lithium battery
charge is low. Reset the date and time when this occurs (p. 26).
If the power saving function activates, press the ON/OFF button to
restore power. (p. 31)
You will hear a start-up sound and see the start-up image when the
power is turned on. (To change the start-up sound and image, see
p.49, 51, 129)
The start-up image does not display when the LCD monitor is turned
off in shooting mode or when the camera is connected to a TV via
the A/V Out terminal.
Turning On the Camera without the Start-Up Sound and Start-Up Image
Hold the SET button down while turning on the power.
Press the ON/OFF button until the
power lamp lights green.
The lens extends when the mode switch is
set to .
The lens retracts approximately 1 minute
after sliding the mode switch from to
.
When the mode switch is set to , the
upper indicator beside the viewfinder will
blinks green and the LCD monitor will turn
on.
Power Lamp
31
Basic Functions
Power Saving Function
This camera is equipped with a power saving function.
When this function is turned on and it activates, restore power by pressing
the ON/OFF button.
Shooting Mode: Powers down approximately 3 minutes after the
last control is accessed on the camera.
The LCD monitor automatically turns off 1 minute*
after the last control is accessed even if [Auto
Power Down] is set to [Off].
(Press any button
except the ON/OFF button to turn the LCD
monitor back on.)
* This time can be changed (p. 49).
Playback Mode: Powers down approximately 5 minutes after the
last control is accessed on the camera.
Connected to a Printer (sold separately):
Powers down approximately 5 minutes after the
last control is accessed on the camera or on a
connected printer.
The power saving function will not activate during slide show or while the
camera is connected to a computer.
The power saving function can be turned off (p. 49).
32
Switching Between Shooting/Playback
The mode switch is used to select Shooting and Playback functions.
When a printer (sold separately) is properly connected, the , or
icon appears on the LCD monitor.
To Shoot Images (Shooting Mode)
Slide the mode switch to .
To Play Back Images (Playback Mode)
Slide the mode switch to .
When a printer (sold separately) is connected,
images can be printed (see the Direct Print User
Guide).
When a camera is connected, recorded images
can be downloaded to and viewed with a computer
(p. 119).
33
Basic Functions
Using the LCD Monitor
The LCD monitor can be used to compose images while shooting, adjust
menu settings and play back recorded images. Icons showing the camera’s
status and setting contents appear on the LCD monitor.
The image in the LCD monitor will darken in strong sunlight or bright
light. This does not constitute a malfunction.
Shooting Mode ( )
• The LCD monitor setting (On or Off) is saved by the camera when
the power is turned off so that the same setting is automatically
available when the power is turned on again. However, the setting
may be lost when the power has been turned off after the “Change
the battery pack” message has displayed, while the LCD monitor
was on in shooting mode.
• In the or mode, the LCD monitor turns on regardless of its
On/Off setting.
Press the DISP. button.
The display mode changes as follows with
each press.
Standard (No Information)
Detailed (Information View)
Off
34
Playback Mode ( )
When the mode switch is set to , the LCD monitor will turn on.
In Index playback mode (p. 91), the detailed display is not available.
Press the DISP. button.
The display mode changes as follows with
each press.
Standard
Detailed
No Information
35
Basic Functions
Information Displayed on the LCD Monitor
When shooting or playing back images, the shooting information or play
back information appears on the LCD monitor.
When setting the flash, continuous mode, self-timer, macro mode, infinity
mode, or the metering method, the shooting information displays on the
LCD monitor for approximately 6 seconds even if the LCD monitor is set to
[Standard (No Information)] or [Off]. (It may not display under some
circumstances, depending on the selected settings.)
A slow shutter speed has likely been selected because of insufficient
lighting if the upper indicator beside the viewfinder blinks orange after
the metering preparations are complete and the camera shake icon
appears in the LCD monitor. Set the flash to or , or affix the
camera to a tripod to shoot.
• Right after a shot is taken, the image and its information appear in
the LCD monitor for 2 seconds (or for the number of seconds
selected if the review time was changed (2 - 10 sec.)) even if you
release the shutter button. If the SET button is pressed while an
image is displayed, it will continue to display (p. 54)
• While a recorded image is displayed on the LCD monitor, you can
check the exposure with the graph (see Histogram Function p.38)
that shows the distribution of the brightness data. If the exposure
requires adjustment, set the exposure compensation and reshoot.
(Press the DISP. button if the histogram and other information is not
shown)
Shooting Mode
36
* Appears even if the LCD monitor is set to [Standard (No Information)].
(1) is not available with the PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430.
Zoom powers indicate the combined optical and digital amount of zoom.
These figures appear when the digital zoom is activated.
ISO Speed (p. 85)
Photo Effect (p. 84)
Compression (p. 55)
Resolution (p. 55)
Low Battery (p. 22)
Metering Mode (p. 77)
Shooting Method (p. 63, 64)
Flash (p. 58)
Movie Recording (p. 70)
Camera Shake Warning (p. 35)
Spot AE Point Frame ( Mode)
AF Frame (p. 76)
Shots Remaining or Remaining
Movie Time/Elapsed Time
Digital Zoom (p. 62)
PowerShot S500 DIGITAL ELPH/DIGITAL IXUS 500:
3.8x, 4.9x, 6.1x, 7.6x, 9.3x, 12.0x
PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430:
4.3x, 5.3x, 6.7x, 8.2, 11.0x
(Red)*
*
Quick Shot (p. 57)
*
Exposure Compensation (p. 78)
Long Shutter Mode (p. 79)
White Balance (p. 81)
Shooting Mode (p. 53)
Macro/Infinity (p. 60)
Auto Rotate (p. 86)
AE Lock
(p. 74)
FE Lock
(p. 75)
AF Lock
(p. 72)
(1)
*
*
*
*
*
37
Basic Functions
Playback Mode (Standard Display)
Protection Status (p. 104)
Compression (Still Images)
(p. 55)
Resolution (Still Images) (p. 55)
Movie (p. 93)
WAVE Format Sound (p. 98)
Long Shutter Mode (p. 79)
Shooting Mode (p. 53)
Exposure Compensation
(p. 78)
White Balance (p. 81)
Photo Effect (p. 84)
ISO Speed (p. 85)
Resolution (Movies) (p. 55)
Flash (p. 58)
Metering Mode (p. 77)
Movie Length Shown on
Movie Files (p. 70)
File Number
Shooting DateImage Number
Playback Mode (Detailed Display)
Histogram
Macro/Infinity (p. 60)
(1) is not available with the PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430.
(1)
38
The following information may also be displayed with some images.
Please note that image information recorded by this camera may not
display correctly on other cameras and image information recorded
by other cameras may not display correctly on this camera.
A sound file in a format other than the WAVE format is attached or the
file format is not recognized.
JPEG file with format not conforming to Design rule for Camera File
System Standards
RAW format file
File with unrecognized format
Histogram Function
The histogram is a graph that allows you to judge the brightness of the
shot image. The greater the bias toward the left in the graph, the darker
the image. The greater the bias toward the right, the brighter the image.
If the image is too dark, adjust the exposure compensation to a positive
value. Similarly, adjust the exposure compensation to a negative value
if the image is too bright (p. 78).
Sample Histograms
Balanced ImageDark Image Bright Image
39
Basic Functions
Using the Viewfinder
The viewfinder can be used to conserve power by setting the LCD monitor
to Off (p. 33) while shooting.
Image Seen in Viewfinder vs. Recorded Image
Usually the recorded image is wider than the image seen in the
viewfinder. Confirm the actual image size with the LCD monitor.
The image recorded may differ from the image seen in the viewfinder
due to the distance between the viewfinder and lens (especially with
close-ups). If you use the viewfinder to take close-up shots, portions of
the close-up subject may not appear in the recorded image. Use the
LCD monitor when taking close-up shots.
Shows the center of the image
View Finder
About the Autofocus Function
This camera employs AiAF (artificial intelligence autofocus) technology
which uses a broad metering field to calculate the focal distance with
high precision. It delivers a crisp focus even when the photographic
subject is slightly off-center.
The AiAF function can be turned off so that the autofocus is metered from
a fixed AF frame at the center of the field (p. 76).
40
Using the Zoom
The zoom can be adjusted from 36 mm to 108 mm in 35 mm film equivalent
terms.
Telephoto/Wide Angle
Digital Zoom
When the LCD monitor is on, you can shoot with a combined optical and
digital zoom up to approximately 12x with the PowerShot S500 DIGITAL
ELPH/DIGITAL IXUS 500 and 11x with the PowerShot S410 DIGITAL ELPH/
DIGITAL IXUS 430 (p. 62).
The digital zoom is unavailable in some modes (p. 160).
Images become coarser the more they are digitally zoomed.
1
Press the zoom lever toward or
.
Press the zoom lever toward to zoom
in (telephoto).
Press the zoom lever toward to zoom
out (wide angle).
41
Basic Functions
Pressing the Shutter Button
The shutter button features a two-stage action.
Pressing Halfway
Pressing halfway automatically sets the exposure and focus.
Press the shutter button halfway.
zIndicator Status
Upper Indicator
Green: Metering complete
(two beeps sound)
Orange: Flash will fire
Blinking Orange: Camera shake warning/
Insufficient exposure
Lower Indicator
Yellow: Macro mode/Infinity
mode/AF lock (p. 72)
Blinking Yellow: Focusing difficulty
*
(single beep sounds)
* Use the focus lock or AF lock to shoot when the
indicator blinks yellow (p. 72).
zAF Frame Status (LCD Monitor On)
AiAF On (p. 76)
Green Frame: Metering complete
(focused AF frame)
No Frame: Focusing difficulty
(single beep sounds)
AiAF Off (p. 76) (Center AF Frame)
Green Frame: Metering complete
Yellow Frame: Focusing difficulty
(single beep sounds)
Indicator
42
Pressing Fully
Pressing the shutter button down fully activates the shutter and causes the
shutter sound to sound.
Shots cannot be taken while the flash is charging.
AF-assist Beam
The AF-assist Beam will sometimes emit when the shutter button is
pressed halfway to assist focusing in certain conditions, i.e., dark
conditions.
The AF-assist Beam can be turned off (p. 47).
For example, if animals are your subject, turn off the beam when
shooting in the dark to avoid startling them.
However, please keep in mind the following facts.
- Turning the AF-assist Beam off or shooting in dark places may
make it more difficult for the camera to focus.
- The red-eye reduction lamp may emit when the flash is set to
or even if the AF-assist Beam is turned off.
Press the shutter button fully.
While the image is being recorded to the CF
card, the upper indicator beside the
viewfinder blinks green.
43
Basic Functions
Selecting Menus and Settings
Menus are used to adjust shooting and playback settings, as well as other
camera settings like the Date/Time and sounds. Menus are displayed by
pressing the FUNC. or MENU button according to the circumstances. Use
the LCD monitor to perform the following procedures.
Selecting Menu Settings with the FUNC. Button
(Shooting Mode only)
1
Slide the mode switch to (Rec.).
2
Press the FUNC. button.
The icons of the items that can be adjusted
appear at the LCD monitor’s left edge.
3
Use the or button to select an
item.
See FUNC Menu on the next page for the
menu items available.
4
Use the or button to select an
option.
Some menu items can only be selected
after pressing the SET button to display
the next menu. Press the SET button again
to confirm the setting.
You can shoot right after performing these
steps. The menu displays again after the
shot, allowing you to change the settings
easily.
5
Press the FUNC. button.
The menu will close.
44
Selecting Menu Settings with the MENU Button
1
Slide the mode switch to (Rec.)
or (Play).
(
) Resolution (Movie)*
(p. 55)
FUNC. MENU
()
ISO Speed (p. 85)
()
Photo Effect (p. 84)
(
) Compression
(p. 55)
(
) Resolution
(p. 55)
()
Exposure Compensation (p. 78)
(1) Long Shutter Mode (p. 79)
()
White Balance (p. 81)
( ) Items in parentheses show default settings.
*The PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430 menu is
different because it does not feature the option.
45
Basic Functions
See Setting the DPOF Print Settings for the procedures for the
(Print Order) item in the Play menu.
2
Press the MENU button.
In Shooting mode, the (Rec.) menu
appears.
In Playback mode, the (Play) menu
appears.
3
Use the or button to select a
menu.
Select the menu with the / , or
icon in the upper left corner of the
LCD monitor selected.
The zoom lever lets you select the menu
even if the / , or icon is
not selected.
4
Use the or button to select an
item.
See Menu Settings and Factory Defaults (p.
47) for the menu items.
5
Use the or button to select an
option.
Menu items followed by an ellipsis (...) can
only be selected after pressing the SET
button to display the next menu. Press the
SET button again to confirm the setting.
6
Press the MENU button.
In Shooting mode, the menu can be closed
by pressing the shutter button halfway.
46
Rec. Menu
Play Menu
Set up Menu
(
The menu will appear
slightly different depending
on the Shooting mode
)
Shooting Mode Playback Mode
My Camera Menu
Shooting Mode
Playback Mode
When the My camera menu
is displayed, pressing the
button returns to the
Rec./Play menu.
When the Rec./Play menu
is displayed, pressing the
button displays the My
camera menu.
: Selects items.
: Selects options.
47
Basic Functions
Menu Settings and Factory Defaults
This chart shows the options and default settings for each menu.
* Default setting
Rec. Menu
Menu Item Options
Reference
Page
Quick Shot
Sets the Quick Shot option to on or off.
•On
• Off*
p. 57
AiAF
Sets whether or not the camera automatically
selects the AF frame or a fixed center AF
frame.
•On*
•Off
p. 76
Cont. Shooting
Sets the speeds of the continuous shooting
mode.
Standard continuous shooting*
High-speed continuous shooting
p. 63
Self-timer
Sets the duration of the self-timer delay.
10 seconds*
2 seconds
p. 64
AF-assist Beam
Sets the AF-assist Beam to on or off.
•On*
•Off
p. 42
Digital Zoom
Sets the digital zoom to on or off.
•On
• Off*
p. 62
Review
Sets the duration images display on the LCD
monitor after the shutter button releases.
•Off
• 2* to 10 seconds
p. 54
Long Shutter
Sets the shutter speed to slow settings.
•On
•Off*
p. 79
48
Play Menu
Menu Item Options
Reference
Page
Protect Protects images from accidental erasure. p. 104
Rotate
Rotates images clockwise 90° or 270° in the
display.
p. 97
Sound Memo Adds sound memos to images. p. 98
Erase all
Deletes all images from a CF card
(except for protected images).
p. 106
Slide Show Plays images automatically one after the other. p. 100
Print Order
Selects images and the number of print copies
for output to a direct print compatible printer
or photo developing service.
p. 110
Transfer Order
Specifies settings for images before
downloading to a computer.
p. 116
Set up Menu
Menu Item Options
Reference
Page
Mute
Sets whether or not a beep sounds when the
shutter button is pressed or when a menu
operation is performed.
See How the [Mute] option in the (Set up)
Menu and Sound in the (My Camera) Menu
Interact (p. 51).
•On
•Off*
(Still beeps to warn of an error even when set
to On.)
49
Basic Functions
Menu Item Options
Reference
Page
Volume
Adjusts the volume of the start-up sound,
operation sound, self-timer sound, shutter
sound and playback sound. The volume
cannot be adjusted if [Mute] is set to [On].
Off 1 2* 3 4 5
-
Start-up Vol.
Adjusts the volume of the start-up sound when
the camera power is turned on.
p. 30
Operation Vol.
Adjusts the volume of the operation sound that
beeps when any button other than the shutter
button is pressed.
Selftimer Vol.
Adjusts the volume of the self-timer sound
played 2 sec. before the shutter is released.
p. 64
Shutter Volume
Adjusts the volume of the sound played when
the shutter releases. The shutter sound does
not play when a movie is recording.
p. 41
Playback Vol.
Adjusts the volume of movie sounds and
sound memos.
p. 93
p. 98
LCD Brightness
Adjusts the LCD brightness of the LCD monitor.
• -7 to 0* to +7
Use the or button to adjust the
brightness. If you press the or button,
the display returns to the Set up menu. You
can check the brightness in the LCD monitor
while you are adjusting the setting.
Power Saving
Sets the [Auto Power Down] and [Display Off]
options.
p. 31
Auto Power Down
Sets whether or not the camera automatically
powers down after a set period of time elapses
without something being pressed.
•On*
•Off
Display Off
Sets the length of time before the LCD monitor
goes off when no camera operation is
performed.
• 10 sec.
20 sec. 30 sec.
• 1 min.* 2 min. 3 min.
50
Date/Time Sets the date and time and the date format. p. 26
Format Formats (initializes) CF cards. p. 107
File No. Reset
Sets how file numbers are assigned to images
when new CF cards are inserted.
•On
•Off*
p. 87
Auto Rotate
Sets whether or not images shot with the
camera held vertically are automatically
rotated in the display.
•On*
•Off
p. 86
Language
Sets the language used in menus and
messages on the LCD monitor.
• English* • Italiano
• Deutsch • Norsk
• Français • Svenska
• Nederlands • Español
• Dansk • Chinese
• Suomi Japanese
You can also change the language in playback
mode by holding the SET button and pressing
the MENU button.
p. 28
Video System
Sets the video output signal standard.
•NTSC
•PAL
p. 127
Menu Item Options
Reference
Page
51
Basic Functions
You can select the theme, start-up image and sound, shutter sound,
operation sound and selftimer sound used on this camera.
These are called the My Camera settings. You can also customize the
and options for each item with images recorded on the CF card and
newly recorded sounds or by using the supplied software.
See the Software Starter Guide for details.
How the [Mute] option in the (Set up) Menu and Sounds in the
(My Camera) Menu Interact
To turn off each sound, such as the start-up sound, shutter sound,
operation sound and selftimer sound, [Mute] must first be set to [On] in the
(Set up) menu. When [Mute] is set to [On], each sound option will not
sound even if they are set individually to [On]. The warning sound, however,
will emit even when [Mute] is set to [On].
My Camera Menu
Menu Item Available Settings
Reference
Page
Theme
Selects a common theme for each My
Camera settings item.
p. 129
Start-up Image
Sets the image displayed when the
camera power is turned on.
Start-up Sound
Sets the sound emitted when the camera
power is turned on.
Operation Sound
Sets the sound emitted when any button
other than the shutter button is pressed.
Selftimer Sound
Sets the sound emitted 2 seconds before
the shutter releases in self-timer mode.
Shutter Sound
Sets the sound emitted when the shutter
button is pressed. There is no shutter
sound for movies.
My Camera Menu Contents
(Off) / * / /
52
Resetting Settings to Their Default Values
You can reset the menu and button settings to the default settings in one
operation.
Settings cannot be reset when the camera is connected to a
computer or to a separately sold printer.
The following cannot be reset.
- The [Date/Time], [Language] and [Video System] options in the
(Set up) menu (p. 50)
- White balance data recorded with the custom white balance
function (p. 82).
- Newly added My Camera settings
(p. 131)
1
Press the ON/ OFF button until the
power lamp lights green.
Set the mode switch to any position.
2
Press and hold the MENU button for
more than 5 seconds.
3
Use the or button to select
[OK] and press the SET button.
To exit without resetting, select [Cancel].
Power Lamp
53
Shooting
Shooting in Auto Mode
In this mode, all you have to do is press the shutter button and let the
camera do everything else.
•See Functions Available in Each Shooting Mode (p. 160).
With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it so they do not show
at all (p. 54).
1
Slide the mode switch to and
turn the mode dial to .
2
Aim the camera at the subject.
3
Use the zoom lever to achieve the
desired composition (relative
subject size in the viewfinder) (p.
40).
4
Press the shutter button halfway (p.
41).
Two beeps will sound when the camera
has finished metering, and the upper
indicator beside the viewfinder will light
green or orange. If the LCD monitor is on,
the AF frame will appear green.
If the subject is difficult to focus on, the lower
indicator beside the viewfinder will blink yellow
and the beep will sound one time.
5
Press the shutter button fully (p.
42).
You will hear the sound of the shutter
when the shutter activates.
The picture appears for two seconds on
the LCD monitor.
Shooting
54
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
Keeping the shutter button pressed after a shot.
Pressing the SET button while the image is displayed on the LCD monitor.
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
You can do the following while the image is displayed.
- Display the image’s detailed information (p. 34).
- Erase the image (p. 105).
- Magnify the image in the display (When pressing the SET button
while the image is displayed) (p. 90).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to [Off] or
changed to any time in the range of 2 to 10 seconds in one-second increments.
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use
the or button
to select
review setting and press the MENU
button.
With the [Off] option, the image will not
automatically display.
In the [2 sec.] to [10 sec.] range, the
image will continue to display for the
specified time even if the shutter button is
released.
Holding the shutter button down after a
shot holds the image in the display
regardless of the setting.
55
Shooting
Changing Resolution/Compression Settings
You can change the resolution and compression (excluding movies)
settings to suit the purpose of the image you are about to shoot.
PowerShot S500 DIGITAL ELPH/DIGITAL IXUS 500
PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430
* Paper sizes vary according to region.
Resolution Purpose
(Large)
2592 x 1944 pixels Large
• Print larger than A4 size* 210 x
297 mm (8.3 x 11.7 in.) prints
Print larger than Letter size* 216 x
279 mm (8.5 x 11 in.) prints
(Medium 1)
2048 x 1536 pixels
• Print up to A4 size* 210 x 297
mm (8.3 x 11.7 in.) prints
• Print up to Letter size* 216 x
279 mm (8.5 x 11 in.) prints
(Medium 2)
1600 x 1200 pixels
• Print postcard size 148 x 100
mm (6 x 4 in.) prints
• Print L-size 119 x 89 mm (4.7 x
3.5 in.) prints
(Small)
640 x 480 pixels Small
Send images as e-mail attachments
• Shoot more images
Resolution Purpose
(Large)
2272 x 1704 pixels Large
• Print larger than A4 size* 210 x
297 mm (8.3 x 11.7 in.) prints
Print larger than Letter size* 216 x
279 mm (8.5 x 11 in.) prints
(Medium 1)
1600 x 1200 pixels
• Print postcard size 148 x 100
mm (6 x 4 in.) prints
• Print L-size 119 x 89 mm (4.7 x
3.5 in.) prints
(Medium 2)
1024 x 768 pixels
• Print card size 86 x 54 mm (3.4
x 2.1 in.) prints
(Small)
640 x 480 pixels Small
• Send images as e-mail
attachments
• Shoot more images
56
Movies can be shot with the following resolution.
Compression Purpose
Superfine
High
Quality
• Shoot higher quality images
Fine • Shoot normal quality images
Normal Normal
• Shoot more images
Resolution
640 x 480 pixels
(Not featured on the PowerShot S410
DIGITAL ELPH/DIGITAL IXUS 430)
320 x 240 pixels
160 x 120 pixels
1
In the FUNC. menu, select
*
or
*
.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
2
Use the or button to select an
option.
Compression (Excluding Movies)
Select , or .
Resolution (Still Images)
Select , , or .
Resolution (Movies)
Select *, or .
You can shoot right after selecting an option.
The menu displays again after the shot,
allowing you to change the settings easily.
* is not available with the PowerShot S410
DIGITAL ELPH/DIGITAL IXUS 430.
57
Shooting
•See Image File Sizes (Estimated) (p. 150).
•See CF Cards and Estimated Capacities (p. 148).
Quick Shots
You can reduce shutter lag time to capture those fleeting “photo
opportunities”.
• You cannot select the quick shot method for use with the viewfinder
(LCD monitor must be on).
• The LCD monitor display freezes while the camera is autofocusing.
3
Press the FUNC. button.
The display will return to the Shooting
screen.
1
Press the DISP. button to turn the
LCD monitor on.
2
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
3
Use
the or button
to select [On]
and press the MENU button.
The display will return to the Shooting
screen.
The icon will display on the LCD
monitor (detailed display on) when the
"Quick Shot" option is set to On.
58
Using the Flash
Use the flash according to the guidelines below.
Auto The flash fires automatically as required by the light level.
Auto with
Red-eye
Reduction
The flash fires automatically as required by the lighting
level, and the red-eye reduction lamp fires each time
the main flash fires.
Flash On The flash fires with every shot.
Flash Off The flash will not fire.
Slow
Synchro
The flash timing is adjusted to slow shutter speeds. This
reduces the chance that the background will be dark when
shots are taken at night or in rooms with artificial lighting.
The red-eye reduction lamp fires with each shot.
Use of a tripod is recommended.
Setting available
U Can be selected for the
first image only.


U
 U
U
1
Press the button to switch
between flash modes.
The selected flash mode appears on the LCD
monitor.
59
Shooting
When you use flash photography at higher ISO speeds, the chances
of white streaks appearing in the image increase the closer you
approach to the subject.
Since a slow shutter speed is selected in dark places when the flash
is set to Off or Slow Synchro, take care to avoid blurring the image.
- Shooting in Mode
Be careful to hold the camera still to avoid camera shake.
- Shooting in or Mode
Fix the camera to a tripod to shoot in these modes since the
shutter speed will be slower than in the mode. If an image is
dark in mode, reshooting it in mode will make it brighter.
The flash can be fired when the indicator lights a steady orange after
pressing the shutter button halfway.
• The flash may take up to approximately 10 seconds to charge. The
recharging time will vary with such factors as the shooting
conditions and battery charge. Shots cannot be taken while the flash
is charging.
• The flash fires twice. The main flash follows a preparatory pre-flash.
The exposure reading obtained from the subject with the pre-flash is
used to set the optimal flash intensity for the main flash, which is
used to capture the image.
• When using the flash, be sure to shoot from at least 46 cm (1.5 ft.)
away from your subject for standard photography and at least 30 cm
(1.0 ft.) for macro photography.
Red-eye Reduction
Light reflecting back from eyes can make them appear red when the
flash is used in dark areas. Under these conditions, use the red-eye
reduction mode. For this mode to be effective, the subject must be
looking right at the red-eye reduction lamp. Try asking them to look
directly at the lamp. Even better results can be obtained by
increasing the lighting in indoor settings or approaching closer to
the subject.
The shutter will not activate for approximately 1 second after the red-
eye reduction lamp fires in order to improve the effect (excluding
when using the quick shot function). If you want a more immediate
shutter response, set the flash to , or .
60
Shooting Close-Ups/ Infinity Shots
To cancel the macro/infinity mode
Press the
/
button to remove or
from the display.
Use the LCD monitor to compose close-ups in macro mode since
images composed with the viewfinder may be off-center (p. 39).
The exposure may not be optimal when the flash is used in macro mode
in the range of 5 to 30 cm (2.0 in. to 1.0 ft.).
Macro
Use this mode to record subjects in the range of 5 to 46
cm (2.0 in. to 1.5 ft.) from the lens tip when at wide-
angle end and in the range of 30 to 46 cm (1.0 ft. to 1.5
ft.) when at the telephoto end setting.
Infinity
Use this mode to record landscapes and distant objects.
It can also be used for compositions combining both
near and distant objects.
Setting available
U Can be selected for
the first image only.
U
U
1
Press the / button to select the
macro/infinity mode.
The selected macro/infinity mode appears
on the LCD monitor.
61
Shooting
Image Area in Macro Mode
When the zoom is set between the telephoto end and the wide-angle
end, the distance from lens to subject is the same as when the zoom is
set to the telephoto end.
Distance from Lens to
Subject
Image Area
Telephoto End 30 cm (1.0 ft.) 107 x 80 mm (4.2 x 3.1 in.)
Wide-Angle End 5 cm (2.0 in.) 58 x 43 mm (2.3 x 1.7 in.)
62
Using the Digital Zoom
When the LCD monitor is on, images can be zoomed to the following
powers with the combined optical and digital zoom functions.
PowerShot S500 DIGITAL ELPH/DIGITAL IXUS 500: Approx. 3.8x, 4.9x, 6.1x, 7.6x, 9.3x, 12.0x
PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430: Approx. 4.3x, 5.3x, 6.7x, 8.2x, 11.0x
The digital zoom cannot be used when the LCD monitor is turned off.
Images become coarser the more they are digitally zoomed.
1
Press the DISP. button to turn the
LCD monitor on.
2
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
3
Use
the or button
to select [On]
and press the MENU button.
The display will return to the Rec. screen.
4
Press the zoom lever toward .
The combined optical and digital zoom
factor appears in the upper right of the
LCD monitor.
When you press the zoom lever toward ,
the zoom stops when the lens reaches the
maximum optical telephoto setting.
Press the zoom lever toward again to
activate the digital zoom and further zoom
the image digitally.
Press the zoom lever toward to zoom out.
63
Shooting
Continuous Shooting
In this mode, the camera shoots continuously while the shutter button is
held down. Recording ceases when the shutter button is released.
To cancel continuous shooting
Press the
/ button twice to display .
Standard Continuous
Shooting
Use this mode to view images on the LCD
monitor as you shoot continuously. The
shutter interval is longer in this mode than
in mode.
High-Speed Continuous
Shooting
Use this mode to shoot continuously with a
short shutter interval. You cannot check
images while shooting continuously.
1
Press the / button to display
or .
The continuous shooting function shoots
at the following rates.*
Approximately 1.5 frames/sec.
PowerShot S500 DIGITAL ELPH/DIGITAL
IXUS 500:
Approximately 2.2 frames/sec.
PowerShot S410 DIGITAL ELPH/DIGITAL
IXUS 430:
Approximately 2.5 frames/sec.
* Large/Fine, LCD monitor off mode. (These
figures reflect Canon’s testing standard. The
actual figures will vary according to the shooting
conditions and settings.)
64
To change the continuous shooting speed
The interval between shots may lengthen slightly when the camera’s
built-in memory fills.
If the flash is firing, the interval between shots will lengthen to
accommodate the flash’s charging requirements.
Using the Self-timer
With this function, images are shot 10 or 2 seconds after the shutter button is
pressed. This is useful when you want to take a memorable photo with everyone
including yourself in the picture. The self-timer can be used in any shooting
mode.
To cancel the self-timer
Press the
/ button to display .
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
or and press the MENU button.
The display will return to the Shooting
screen.
1
Press the / button to display
or .
When the shutter button is pressed fully,
the self-timer will activate and the self-
timer lamp will blink.
When the self-timer is set to ( ),
the shutter activates 10 (2) seconds after
the shutter button is pressed fully.
65
Shooting
Changing the Self-timer Countdown Time
The self-timer sound can be changed with the Selftimer Sound item in
the (My Camera) menu (p. 51).
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use
the or button
to select
or and press the MENU button.
The display will return to the Shooting screen.
When is selected, the self-timer
sounds and the blinking gets faster 2
seconds before the shutter activates.
When is selected, the self-timer
sounds at the same time as the shutter
button is pressed. The shutter activates in
2 seconds.
66
Shooting in Manual Mode
In this mode, you can change various settings and shoot as you wish.
1
Slide the mode switch to (Rec.)
and turn the mode
dial to .
2
Change the settings.
See Functions Available in Each Shooting
Mode (p. 160).
3
Shoot (p. 53).
If the subject is difficult to focus on when
the shutter button is pressed halfway, the
beep will sound one time and the lower
indicator beside the viewfinder will blink
yellow.
The AF frame will also appear yellow. (If the
AiAF option is set to [On] (p. 76), the AF
frame will not appear.)
67
Shooting
Shooting Panoramic Images (Stitch Assist)
Stitch Assist can be used to shoot overlapping images that can later be
merged (stitched) to create one panoramic image on a computer.
To merge the images on a computer, use PhotoStitch, one of the
supplied programs.
Framing a Subject
The PhotoStitch program detects the overlapping portions of adjoining
images and merges them. When shooting, try to include a distinctive item
(landmark) in the overlapping portions.
Compose each frame so that it overlaps 30 - 50% of the adjoining image. Try
to keep the vertical misalignment to less than 10% of the image height.
Do not include moving items in the overlap.
Do not try to stitch images that include both distant and close items.
These items may appear warped or doubled up in the merged image.
Make the brightness in each image consistent. The final image will appear
unnatural if the contrast in brightness is too great.
To shoot landscapes, swivel (pan) the camera around its own vertical axis.
The overlapping seams of
several adjacent images
can be joined into a single
panoramic image.
68
To shoot close-ups, slide the camera over the subject, keeping it parallel to
the subject as you move it.
Shooting
Images can be shot in two sequences in Stitch Assist.
Left to right horizontally
Right to left horizontally
1
Slide the mode switch to (Rec.)
and turn the mode dial to .
2
Use the or button to select the
sequence direction and press the
SET button.
3
Shoot the first frame in the
sequence.
The exposure and white balance are set and
locked with the first image.
69
Shooting
• A custom white balance setting cannot be set in [Stitch Assist]
mode. To use a custom white balance setting, first set it in another
shooting mode (p. 82).
• The settings for the first image are used to take subsequent images
in the sequence.
It is not possible to display images on the TV when shooting in Stitch
Assist.
See Functions Available in Each Shooting Mode (p. 160).
4
Compose the second image so that
it overlaps a portion of the first and
shoot.
Use the or button to check or retake
the recorded images.
Minor discrepancies in the overlapping
portions can be corrected when the
images are stitched together.
5
Repeat the procedure for additional
images.
A sequence may contain up to 26 images.
6
Press the SET button after the last
shot.
70
Shooting a Movie
PowerShot S500 DIGITAL ELPH
DIGITAL IXUS 500
PowerShot S410
DIGITAL ELPH
DIGITAL IXUS 430
640 x 480 pixels
320 x 240 pixels
160 x 120 pixels
1
Slide the mode switch to (Rec.)
and turn the mode
dial to .
The LCD monitor turns on and displays the
maximum recording time (in seconds).
2
Press the shutter button fully.
Shooting and sound recording starts
simultaneously.
During shooting the recording time (in
seconds) and a red circle appear on the
LCD monitor.
3
Press the shutter button fully again
to stop recording.
The maximum length of a movie clip (10
frames/sec. at , 15 frames/sec. at ,
) is approximately 30 sec. at , 3
min. at , 3 min. at (according to
Canon’s standardized tests).
Recording time vary by the CF card. See CF
Cards and Estimated Capacities (p. 148).
The maximum length of movies may vary
with the subject and shooting conditions.
Recording will automatically stop when
the maximum is reached or when the CF
card runs out of free capacity.
71
Shooting
• The recording time may not display properly during shooting or
filming may stop unexpectedly with the following types of CF cards.
- Slow recording cards
- Cards formatted on a different camera or a computer
- Cards which have had images recorded and erased repeatedly
Although the recording time may not display properly during
shooting, the movie will be recorded correctly on the CF card.
Recording time will display properly if you format the CF card in this
camera (excluding slow recording CF cards).
• You are recommended to use a CF card that has been formatted in
your camera to shoot movies (p. 107). The card supplied with the
camera may be used without further formatting.
• Be careful not to touch the microphone while recording.
• The AE, AF, white balance and zoom settings remain fixed for
subsequent frames at the values selected for the first frame.
• After a clip is shot, the upper indicator beside the viewfinder will
blink green while the clip is being written to the CF card. You cannot
shoot again until the blinking stops.
•See Functions Available in Each Shooting Mode (p. 160).
• Sound is recorded monaurally.
• There is no shutter sound in movie mode.
• QuickTime 3.0 or later is required to play back movie files (AVI/
Motion JPEG) on a computer. QuickTime (for Windows) is included
on the Canon Digital Camera Solution Disk. On the Macintosh
platform, this program is generally bundled with Mac OS 8.5 or later
operating systems.
72
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock)
It may be difficult to focus on the following types of subjects. Use the focus
lock or AF lock in these situations.
Subjects with extremely low contrast to the surroundings
Subjects with extremely bright objects at the center of the composition
Subjects that are moving quickly
Subjects through glass:
Try to shoot as close to the glass as possible to reduce the chances of
light reflecting back off the glass.
Subjects with horizontal stripes
Shooting with the Focus Lock
Shooting with the AF Lock
1
Aim the camera so that an object at
the same focal distance as the main
subject is centered in the
viewfinder or in the AF frame
displayed on the LCD monitor.
2
Press the shutter button halfway
(two beeps will sound).
The focal distance to the object is locked.
3
Re-aim the camera to compose the
shot as desired and press the
shutter button fully.
1
Press the DISP. button to turn the
LCD monitor on.
2
Aim the camera so that an object at
the same focal distance as the main
subject is centered in the AF frame.
73
Shooting
To release the focus lock
Press the
/ button.
• The focus lock can be set in any shooting mode.
When shooting with the focus lock or AF lock using the LCD monitor,
setting the AiAF to Off (p. 76) is recommended since the camera
focuses using the center AF frame only.
• The AF lock is convenient because you can let go of the shutter
button to compose the image. Moreover, the AF lock is still effective
after the picture is taken, allowing you to capture a second image
with the same focus.
• The AF lock can be released by pressing the zoom lever, MENU
button, or by changing the shooting mode or by turning the LCD
monitor off.
3
Press the shutter button halfway
(two beeps will sound) and press
the / button.
The focal distance to the object is locked.
The icon will display and the lower
indicator beside the viewfinder will light
yellow.
4
Re-aim the camera to compose the
shot as desired and shoot.
74
Locking the Exposure Setting (AE Lock)
You can set the exposure and focus separately. This is effective when the
contrast is too strong between the subject and background or when a
subject is backlit.
You must set the flash to . The AE lock cannot be set if the flash
fires.
To release the AE lock
Press the button.
The AE lock may be released by pressing the zoom lever, MENU
button or button, or by changing the white balance, ISO speed,
photo effect or the shooting mode, or by turning the LCD monitor off.
1
Press the DISP. button to turn the
LCD monitor on.
2
Focus on the part of the subject on
which you wish to lock the exposure
setting.
3
Press the shutter button halfway
(two beeps will sound) and press
the button.
The exposure setting is locked.
The icon will display.
4
Re-aim the camera to compose the
shot as desired and press the
shutter button fully.
75
Shooting
Locking the Flash Exposure Setting (FE Lock)
You can lock the flash exposure so that the exposure settings are correctly
set for a particular portion of your subject.
To release the FE lock
Press the button.
1
Press the DISP. button to turn the
LCD monitor on.
2
Press the button to set the flash
to .
3
Focus on the part of the subject on
which you wish to lock the flash
exposure setting.
4
Press the shutter button halfway
(two beeps will sound) and press
the button.
The flash will fire a pre-flash and lock the
flash exposure to the required intensity to
illuminate the subject.
The icon will display.
5
Re-aim the camera to compose the
shot as desired and press the
shutter button fully.
76
The FE lock may be released by pressing the zoom lever, MENU
button or button, or by changing the white balance, ISO speed,
photo effect or the shooting mode, or by turning the LCD monitor off.
Switching between Focusing Modes
Although the autofocus function is preset to the AiAF setting (9 AF frames),
you can set it to the center AF frame.
When [AiAF] is set to [On], the AF frame does not appear. When [AiAF] is
set to [Off], however, the AF frame will appear.
The symbol represents the AF frames as they appear in the LCD monitor.
The focus is locked to the center AF frame when the digital zoom is
used.
No frame On
The camera detects the subject and highlights the AF frames,
from 9 available points, that it will use to determine the focus.
Off
The camera focuses using the center AF frame. This is convenient
for focusing on a specific part of a subject with greater certainty.
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
[On] or [Off].
You can shoot right after selecting an
option.
3
Press the MENU button.
The display will return to the Shooting
screen.
77
Shooting
Switching between Light Metering Modes
You can switch between metering modes to shoot.
Evaluative
Appropriate for standard shooting conditions,
including backlit scenes. The camera divides images
into several zones for light metering. It evaluates
complex lighting conditions, such as the position of
the subject, the brightness, the direct light, and the
backlighting, and adjusts the settings to the correct
exposure for the main subject.
Center-
Weighted
Average
Averages the light metered from the entire frame, but
gives greater weight to the subject matter at the center.
Spot
Meters the area within the spot AE point at the center
of the LCD monitor. Use this setting when you want
to set the exposure on the subject in the center of
the monitor.
1
Press the button to switch
between metering modes.
The selected metering mode appears on the
LCD monitor.
78
Adjusting the Exposure Compensation
Adjust the exposure compensation setting to avoid making the subject too dark
when it is backlit or shot against a bright background or to avoid making lights
appear too bright in night shots.
To reset the exposure compensation
Return the setting to 0.
1
In the FUNC. menu, select
*
.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
2
Use the or button to adjust the
exposure compensation.
The settings can be adjusted in 1/3 stops
in the range -2 to +2.
You can confirm the effect of the setting in
the LCD monitor when it is on.
You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
3
Press the FUNC. button.
The display will return to the Shooting
screen.
79
Shooting
Shooting in Long Shutter Mode
You can set the shutter speed to a slow setting to make dark subjects
appear brighter.
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use the or button
to select [On]
and press the MENU button.
The display will return to the Shooting
screen.
3
In the FUNC. menu, select
*
and
press the SET button.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
4
Use the or button to select a
shutter speed.
The higher the value, the brighter the
image and the lower the value, the darker
the image.
You can shoot right after selecting a value.
The menu displays again after the shot,
allowing you to change the settings easily.
80
To cancel the long shutter mode
While [Long Shutter] is displayed in the FUNC. menu, press the SET button.
The nature of CCD image sensors is such that noise in the recorded
image increases at long shutter speeds. This camera, however, applies
special processing to images shot at shutter speeds slower than 1.3
seconds to eliminate the noise, thereby producing high-quality images.
Nevertheless, a certain amount of processing time may be required
before the next image can be shot.
Use the LCD monitor to confirm that the image was recorded at the
desired brightness.
Please note that camera shake becomes a factor at low shutter
speeds. If the camera shake warning appears on the LCD
monitor, secure the camera to a tripod before shooting.
Use of the flash may result in an over-exposed image. If that occurs,
shoot with the flash set to .
The following are unavailable:
- Exposure Compensation
- Light Metering
- AE Lock
- FE Lock
-ISO speed [AUTO]
- Flash [Auto][Red-eye Reduction Auto]
Available Shutter Speeds
The following shutter speeds (in seconds) are available.
15 13 10 8 6 5 4 3.2 2.5 2 1.6 1.3 1
5
Press the FUNC. button.
The display will return to the Shooting
screen.
81
Shooting
Adjusting
the Tone (White Balance)
When the white balance mode is set to match the light source, the camera
reproduces colors more accurately.
Auto
The camera sets the white balance automatically according
to shooting conditions.
Daylight For recording outdoors on a bright day.
Cloudy
For recording under overcast, shady or twilight skies.
Tungsten
For recording under tungsten and bulb-type 3-wavelength
fluorescent lighting.
Fluorescent
For recording under warm-white, cool-white or warm-
white (3-wavelength) fluorescent lighting.
Fluorescent H
For recording under daylight fluorescent, or daylight
fluorescent-type 3-wavelength fluorescent lighting.
Custom
For setting a custom value with a white sheet of paper, etc.,
to obtain the optimal white balance for the conditions.
1
In the FUNC. menu, select
*
.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
2
Use the or button to select an
option.
See Setting a Custom White Balance
(p. 82).
You can confirm the effect of the setting in
the LCD monitor when it is on.
You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
82
This setting cannot be adjusted when the (Sepia) or (B/W)
photo effects are selected.
Setting a Custom White Balance
You can set a custom white balance to obtain the optimal setting for the
shooting conditions by having the camera evaluate an object, such as a
piece of white paper or cloth, or a photo-quality gray card that you wish to
establish as the standard white color.
Especially in the following cases, as the white balance may not be adjusted
in
(Auto), shoot after reading the white balance data in (Custom).
Shooting close-ups
Shooting subjects of monotone color (such as sky, sea or forest)
Shooting with a peculiar source of light (such as a mercury-vapor lamp)
3
Press the FUNC. button.
The display will return to the Shooting
screen.
1
In the FUNC. menu, select
*
.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
2
Use the or button to select .
83
Shooting
• You are recommended to set the shooting mode to and the
exposure compensation setting to zero (±0) before setting a custom
white balance. The correct white balance may not be obtained when
the exposure setting is incorrect (image appears completely black
or white).
• Shoot with the same settings as when reading the white balance
data. If the settings differ, the optimal white balance may not be set.
Especially the following should not be changed.
-Flash
Setting the flash to on or off is recommended. If the flash fires
when reading the white balance data with the flash set to or
, make sure that you also use the flash when you shoot.
- ISO Speed
• It is also advisable to use the LCD monitor to compose the shot and
to zoom to the telephoto end setting. Also, the digital zoom should
be set to [Off].
• Since the white balance data cannot be read in (Stitch Assist
mode), preset the white balance in another shooting mode.
3
Aim the camera at the white paper,
cloth or gray card and press the SET
button.
Aim the camera so that the white paper,
cloth or gray card completely fills the
frame on the LCD monitor or the entire
viewfinder before pressing the SET
button. The camera reads the white
balance data when you press the SET
button.
You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
4
Press the FUNC. button.
The display will return to the Shooting
screen.
84
Changing the Photo Effect
By setting a photo effect before you shoot, you can change the look and feel
of the pictures you take.
Photo Effect Off Records with no effect.
Vivid
Emphasizes the contrast and color saturation to
record bold colors.
Neutral
Tones down the contrast and color saturation to record
neutral hues.
Low Sharpening Records subjects with softened outlines.
Sepia Records in sepia tones.
B/W Records in black and white.
1
In the FUNC. menu, select
*
.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
2
Use the or button to select an
effect.
You can confirm the photo effect in the
LCD monitor.
You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
3
Press the FUNC. button.
The display will return to the Shooting
screen.
85
Shooting
Adjusting the ISO Speed
Raise the ISO speed when you wish to reduce camera shake or turn the
flash off when shooting in a dark area, or use a fast shutter speed.
Higher ISO speeds increase image noise. To take clean images, use
as low an ISO speed as possible.
The AUTO setting selects the optimal ISO speed. It will automatically
raise the speed when the light from the flash is insufficient to
illuminate the subject matter.
1
In the FUNC. menu, select
*
.
See Selecting Menus and Settings (p. 43).
* The current setting is displayed.
2
Use the or button to select a
speed.
You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
3
Press the FUNC. button.
The display will return to the Shooting
screen.
86
Setting the Auto Rotate Function
Your camera is equipped with an Intelligent Orientation sensor that detects
the orientation of an image shot with the camera held vertically and
automatically rotates it to the correct viewing orientation in the display. You
can set this function on/off.
This function may not operate correctly when the camera is pointed
straight up or down. Check that the arrow is pointing in the right
direction and if it is not, then set the Auto Rotate function to [Off].
Even if the Auto Rotate function is set to [On], the orientation of
images downloaded to a computer will depend upon the software
used to download the images.
• When the camera is held vertically to shoot, the Intelligent
Orientation sensor judges the upper end to be “up” and the lower
end to be “down.” It then regulates the optional white balance,
exposure and focus for vertical photography. This function operates
regardless of the On/Off status of the Auto Rotate function.
When changing the camera’s orientation between the horizontal and
vertical positions, you may hear noise coming from the orientation
detection mechanism. This is not a malfunction.
1
In the (Set up) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use the or button
to select [On]
and press the MENU button.
The display will return to the Shooting
screen.
When the Auto Rotate function is set to
[On] and the LCD monitor is set to the
detailed display mode, the icon
(normal), icon (right end is down) or
icon (left end is down) will appear in
the upper right of the display.
87
Shooting
Resetting the File Number
The images you shoot are automatically assigned a file number. You can set
whether or not the file numbers of a new CF card consecutively follow the
file numbers on the previous CF card.
Setting the File No. Reset to [Off] is useful for avoiding file name
duplication when images are downloaded to a computer.
On
The file number is reset to the start (100-0001) each time a new CF
card is inserted. New images recorded on CF cards with existing files
are assigned the next available number.
Off
The file number of the last image to be shot is memorized so that
images recorded to a new
CF card start from the next number.
1
In the (Set up) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
[On] or [Off] and press the MENU
button.
The display will return to the Shooting
screen.
88
About File Numbers and Folder Numbers
Images are assigned file numbers from 0001 to 9900, and folders are
assigned folder numbers from 100 to 998 (Folder numbers cannot
contain 99 in the last two digits).
Folder File Capacity
Each folder usually contains up to 100 images.
However, since images shot in continuous shooting and stitch assist
are always saved into the same folder, a folder may contain more than
100 images. The number of images may also exceed 100 if a folder
contains images copied from a computer or images shot with other
cameras. Please note, however, that the images in folders containing
2001 or more images cannot be played back in this camera.
Folder numbers cannot contain 99 in the last two digits
89
Playback
Playback
Displaying Images Individually
You may not be able to play back images that have been shot with
another camera or edited on a computer with other software
applications.
1
Slide the mode switch to
(Playback).
The last recorded image will appear in the
display (single image playback).
2
Use the or button to move
between the images.
Use the button to move to the previous
image and the button to move the next
image.
Holding the button down advances the
images more rapidly, but the images will not
appear as clearly.
90
Magnifying Images
To cancel the magnified display
Press the zoom lever toward .
Movie frames and index playback images cannot be magnified.
1
Press the zoom lever toward .
Images can be magnified up to
approximately 10 times in single image
playback.
Hold the
SET
but
ton down and press the
zoom lever toward to cycle through
each setting, from approximately 2.5
times, to approximately 5
and 10 times.
Hold the SET button down and press the
zoom lever toward to cycle back
through the levels of magnification from
approximately 5 times, to 2.5 times and
the standard view.
2
Use the , , or button to
move around the image.
Approximate Location
of the Magnified Area
91
Playback
Viewing Images in Sets of Nine (Index Playback)
To return to single image playback
Press the zoom lever toward .
1
Press the zoom lever toward .
Up to nine images can be viewed at once in
index playback.
2
Use the , , or button to
change the image selection.
Selected Image
Movie
92
Switching between Sets of Nine Images
To return to index playback
Press the zoom lever toward .
1
Press the zoom lever toward
while in index playback.
The jump bar will display.
2
Use the or button to move to
the previous set or the next set.
Hold the SET button down and press the
or button to jump to the first or last set.
Jump Bar
93
Playback
Viewing Movies
You can playback movie clips shot in mode.
Movies cannot be played in the index playback mode.
1
Use the or button to select a
movie.
Images with a icon are movies.
2
Press the SET button.
The movie control panel will display.
Use the or button to adjust the
sound volume.
3
Use the or button to select
(Play) and press the SET button.
The movie and sound will play.
When playback ends, the movie stops at
the last frame displayed. Press the SET
button to display the movie control panel.
Press the SET button again to play from
the beginning.
Volume Level
Movie Control
Panel
94
Pausing and Resuming Play
Operating the movie control panel
You may experience frame dropping and audio breakup when
playing back a movie on a computer with insufficient system
resources.
Movies shot with other cameras may not play back on this camera.
See List of Messages (p. 134).
You can adjust the playback volume of movie clips in the (Set
up) menu.
Use the television’s controls to adjust the volume when playing a
movie on a TV set (p. 127).
Press the SET button during
playback.
The movie playback pauses. Press it again
to resume.
1
Select a movie and press the SET
button (p. 93).
The movie control panel will display.
2
Use the or button to select one
of the following and press the SET
button.
: Exit (Ends playback and returns to
single image playback. Pressing the
Menu button also returns to single
image playback.)
:Play
: First Frame
: Previous Frame
(Rewinds if the
SET
button is held down)
: Next Frame
(Fast Forwards if the
SET
button is held down)
: Last Frame
: Edit (Switches to movie editing mode)
(p. 95)
95
Playback
Editing Movies
Selecting (Edit) in the movie control panel enables you to cut unwanted
portions at the start or end of a movie clip.
Protected movies and movies less than 1 second in duration cannot
be edited.
1
Use the or button to select a
movie and press the SET button.
2
Switch to the movie editing mode.
•See Operating the movie control panel (p.
94).
The movie editing panel and the movie
editing bar will display.
3
Use the or button to select
or and the or button
to set the portion to which the cut is
applied.
: Cut Beginning
: Cut End
: Cursor
Movie Editing Bar
Movie Editing Panel
96
The minimum duration of an edited movie is 1 second.
• It may take approximately 3 minutes to save an edited movie. If the
battery pack runs out of charge partway through, edited movie clips
cannot be saved. When editing movies, use a fully charged battery
pack or the separately sold AC Adapter Kit ACK500 (p. 140).
4
Use the or button to select
(Play) and press the SET button.
A preview of the temporarily edited movie
clip plays.
To stop it, press the SET button again.
5
Use the or button to select
(Save) and press the SET button.
Selecting (Exit) cancels the edits and
returns to the movie control panel display.
6
Use the or button to select
[New File] or [Overwrite] and press
the SET button.
[New File] saves the edited movie under a
new file name. The pre-edit data is left
unchanged.
[Overwrite] saves the edited movie with its
original file name. The pre-edit data is lost.
When the CF card lacks sufficient space to
create a new file, only [Overwrite] can be
selected.
97
Playback
Rotating Images in the Display
Images can be rotated clockwise 90° or 270° in the display.
• Movies cannot be rotated.
• When images are downloaded to a computer, the orientation of
images rotated by the camera will depend upon the software used
to download the images.
• Images can be magnified when rotated (p. 90).
• Images taken vertically with Auto Image Rotate (p. 86) set to [On]
will automatically be rotated to the vertical position when viewed on
the camera’s LCD monitor.
1
In the (Play) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select the
image to be rotated and press the
SET button.
Cycle through the 90°/270°/0° orientations
with each press of the SET button.
3
Press the MENU button.
The display will return to the Play menu.
Pressing the
MENU
button again returns to the
Playback screen.
0° (Original) 90° 270°
98
Attaching Sound Memos to Images
In playback mode (including single image playback, index playback, and
magnifying playback), you can attach sound memos (up to 60 seconds) to
an image. The sound data is saved in WAVE format.
Exiting the Sound Memos
Press the MENU button.
1
In the (Play) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select an
image and press the SET button.
The sound memo control panel will display.
3
Use the or button to select
(Record) and press the SET button.
The recording starts and the elapsed time
is displayed. Speak towards the
microphone of the camera.
Press the SET button again to stop
recording. To resume recording, press the
SET button again.
Up to 60 seconds of recordings may be
added to any one image.
To return to the previous screen, select
(Exit) and press the SET button.
Sound Memo Panel
99
Playback
Playing/Erasing Sound Memos
• You cannot attach sound memos to movies.
The “Memory card full” message will display when the CF card is full
and you will be unable to record sound memos to that card.
• If an incompatible sound memo is attached to an image, you will be
unable to record or play sound memos for that image, and the
“Incompatible WAVE format” message will display. You can erase
incompatible sound data using the camera.
• Sound memos for protected images cannot be erased.
The volume can be adjusted in the (Set up) menu (p. 48).
1
Display an image with a sound
memo attached (p. 98) and press
the SET button.
Images with sound memos attached have
the symbols displayed on them.
The sound memo control panel will display.
2
Use
the or button
to select
(Play) or (Erase) and press the
SET button.
(Play)
The sound memo will play. Playback will
stop when you press the SET button.
Press the SET button again to resume
playback.
Use the or button to adjust the
sound volume.
(Erase)
A confirmation menu will display. Use the
or button to select [Erase] and press
the SET button.
To return the playback to the beginning,
select (Pause) while stopped and press
the SET button.
Sound Memo Panel
100
Automated Playback (Slide Shows)
Starting a Slide Show
A selection of images or all the images on a CF card can be displayed one-
by-one in an automated slide show.
Slide show image settings are based on DPOF standards (p. 110).
All Images Plays all images on the CF card in order.
Slide Show 1-3
Plays the images selected for each slide show in
order (p. 101).
1
In the (Play) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
The Slide Show menu will display.
2
Use the or button to select
[Program] and the or button to
select [All Images], [Show 1],
[Show 2] or [Show 3].
See p.102 from step 3, for selecting the
playback images in slide shows 1-3.
3
Use the or button to select
[Start] and press the SET button.
The slide show starts. The Slide Show menu
will reappear after the playback ends.
101
Playback
• Movies play for their entire recorded length regardless of the time
set in the slide show settings.
• The power-saving function does not activate during a slide show
(p. 31).
Pausing/Resuming a Slide Show
Fast Forwarding/Rewinding a Slide Show
Stopping a Slide Show
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 998 images
may be marked per slide show. Images display in the order of their
selection.
4
Press the MENU button.
The display will return to the Play menu.
Pressing the MENU button again returns to
the Playback screen.
Press the SET button.
The slide show pauses. Press the SET
button again to restart it.
Press the or button.
The previous or next image displays. Hold
down the button to advance through the
images more rapidly.
Press the MENU button.
The slide show stops and the Slide Show
menu reappears.
102
1
Display the Slide Show menu.
See Starting a Slide Show (p. 100).
2
Use the or button to select
[Program] and the or button to
select [Show 1], [Show 2] or [Show 3].
A white checkmark will appear beside a
show already containing images.
3
Use the or button and the
or button to choose [Select] and
press the SET button.
4
Select images for the Slide Show
Use the or button to move between
images and the or button to select
or deselect them. Selected images display a
number corresponding to their selection
order and a white checkmark .
You can press the zoom lever toward to
switch to the index mode (3 images) and use
the same procedures to select images.
While in index playback, pressing the SET
button displays the menu for selecting or
deselecting all images. Use the or
button to select [Select all] or [Clear all] and
press the
SET
button.
5
Press the MENU button.
Press the MENU button repeatedly until the
Playback screen reappears to finish the
procedure.
103
Playback
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have the
show repeat continuously.
• The display interval may vary slightly from the set time for some
images when played.
Slide shows are easy to arrange on a computer with the supplied software
(ZoomBrowser EX/ImageBrowser). See the Software Starter Guide.
Play Time
Sets the duration that each image displays. Choose between
3-10 seconds, 15 seconds, 30 seconds and Manual.
Repeat
Sets whether the slide show stops when all the slides have
been displayed or continues until stopped.
1
Display the Slide Show menu.
See Starting a Slide Show (p. 100).
2
Use the or button to select
[Set up] and press the SET button.
3
Use the or button to select
or and the or button to
select an option.
(Play Time)
Select a play time.
(Repeat)
Select [On] or [Off].
4
Press the MENU button.
The set up menu will close. Pressing the
MENU
button again returns to the Play menu.
Press it again to go back to the
Playback
screen.
104
Protecting Images
You can protect important images and movies from accidental erasure.
To cancel protection
After step 1, select an image to remove protection from and press the SET
button.
Please note that formatting (initializing) a CF card erases all data,
including protected images (p. 107).
1
In the (Play) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select an
image to protect and press the SET
button.
The icon appears on protected images.
You can make the selection of images
easier by toggling between single image
playback and index playback by pressing
the zoom lever toward or .
3
Press the MENU button.
The Play menu displays again. Press it again
to return to the Playback screen.
Protection Icon
105
Erasing
Erasing
Erasing Single Images
You can erase images you do not need or are not satisfied with one by one.
• Please note that erased images cannot be recovered. Exercise
adequate caution before erasing a file.
• Protected images cannot be erased with this function.
1
Use the or button to select an
image for deletion and press the
button.
2
Use the or button to select
[Erase] and press the SET button.
To exit instead of erasing, select [Cancel].
106
Erasing All Images
You can erase all the images saved on the CF card.
Please note that erased images cannot be recovered. Exercise
adequate caution before erasing a file.
• Protected images cannot be erased with this function.
1
In the (Play) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
[OK] and press the SET button.
To exit instead of erasing, select [Cancel].
107
Erasing
Formatting CF Cards
You should always format a new CF card or one from which you wish to
erase all images and other data.
Please note that formatting (initializing) a CF card erases all data,
including protected images and other file types.
• When the camera is malfunctioning, a corrupted CF card might be
the cause. Reformatting the CF card may solve the problem.
• When a non-Canon brand CF card is malfunctioning, reformatting it
may solve the problem.
• CF cards formatted in other cameras, computers, or peripheral
devices may not operate correctly in this camera. When that
happens, reformat the CF card with this camera. If formatting in the
camera does not work properly, turn the camera off and re-insert the
CF card. Then turn the camera back on and format again.
1
In the (Set up) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
[OK] and press the SET button.
To exit instead of formatting, select
[Cancel].
The capacity of the CF card displayed after
formatting will be less than the rated
capacity of the CF card. This is not a
malfunction of the CF card or camera.
110
Setting the DPOF Print Settings
You can select images on a
CF
card for printing and specify the number of
print copies in advance using the camera. This is extremely convenient for
sending the images to a photo developing service, or for printing on a direct
print function compatible printer.
See the Direct Print User Guide for instructions on how to print.
Selecting Images for Printing
There are two ways to select images.
Singly
All images on a
CF
card (the number of print copies is set to one per
image)
1
In the (Play) menu, select
and press the SET button.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
[Order] and press the SET button.
111
Print Settings/Transferring
Single Images
All the Images on a CF Card
3
Select images for printing.
As shown below, selection methods differ
according to the options chosen for the
(Print Type) settings (p. 113).
(Standard)/ (Both)
Use the or button to select an image
and the or button to select the
number of print copies (up to maximum of
99).
(Index)
Use the or button to move to an
image and the or button to select or
deselect it.
A checkmark displays on selected images.
You can press the zoom lever toward to
switch to the index mode (3 images) and
use the same procedures to select images.
4
Press the MENU button.
The Print Order menu will reappear.
Pressing the MENU button again returns to
the Play menu. Press it again to go back to
the Playback screen.
3
Press the zoom lever toward .
The display switches to index playback (3
images).
4
Press the SET button.
Number of Print Copies
Selected for an Index Print
120
The camera will not operate correctly if you connect it to your computer
before installing the driver and software. If this happens, please refer to
the Troubleshooting section of the Software Starter Guide.
You do not need to turn off the camera or computer power when
making a USB connection.
Please refer to your computer’s manual for information regarding the
location of the USB port.
You are recommended to use a fully charged battery pack or AC
Adapter Kit ACK500 (sold separately) to power the camera when
connecting to a computer (pp. 18, 140).
All procedures performed with a connection to a USB 2.0 compliant
board are not guaranteed.
1
Install the driver and the software applications bundled
on the Canon Digital Camera Solution Disk.
Please see the Software Starter Guide for the installation procedures.
2
Use the supplied interface cable to connect the computer's
USB port to the camera's DIGITAL terminal.
To connect the interface cable to the camera's DIGITAL terminal, lift the
terminal cover with a fingernail under its upper edge and insert the
connector until it clicks into place.
Always grasp the connector’s sides to remove the interface cable from
the camera's DIGITAL terminal.
IMPORTANT
You must install the software and driver bundled on the supplied
Canon Digital Camera Solution Disk onto your computer before
connecting the camera to a computer.
USB Port
DIGITAL Terminal
Interface Cable
121
Connecting the Camera to a Computer/TV
If the event dialog fails to appear, click the [Start] menu, followed by
[Programs] or [All Programs], [Canon Utilities], [CameraWindow], and
[CameraWindow Set Auto-Launch].
3
Slide the camera's mode switch to (Play).
4
Press the ON/OFF button until the power lamp lights green.
5
Select [Canon CameraWindow] in the event dialog that
appears on the computer and click [OK] (first time only).
Windows:
Proceed to steps 5 and 6 below.
Macintosh:
Refer to the Software Starter Guide and download images.
122
6
Click [Set] in the [CameraWindow - Set Auto-Launch]
window (first time only).
The Download Image window will display.
Using the software and computer to download images:
See the Software Starter Guide.
Using the Camera to Download Images (Direct Transfer Function)
See Downloading Images by Direct Transfer (next page).
123
Connecting the Camera to a Computer/TV
Downloading Images by Direct Transfer
Use this method to download images using camera operations.
Install the supplied software and adjust the computer settings before using
this method for the first time (p. 120).
All Images/New Images/DPOF Trans. Images
All Images
Transfers and saves all images to the computer.
New Images
Transfers and saves to the computer only the
images that have not been previously transferred.
DPOF Trans. Images
Transfers and saves to the computer only the images
with DPOF Transfer Order settings (p. 116).
Select & Transfer
Transfers and saves single images to the
computer as you view and select them.
Wallpaper
Transfers and saves single images to the computer as
you view and select them. The transferred images
display on the computer desktop.
1
Confirm that the Direct Transfer
menu is displayed on the camera's
LCD monitor.
The button will light blue.
Press the MENU button if the Direct
Transfer menu fails to appear.
2
Use the or button to select
, or , and press the
(Print/Share) button.
To cancel the transfer, press the
SET
button.
The images will download and the Direct
Transfer menu will reappear.
124
Select & Transfer/Wallpaper
Only JPEG format images can be downloaded as wallpaper for the
computer.
The option selected with the button is retained even when the
camera's power is turned off. The previous setting will be in effect the
next time the Direct Transfer menu is displayed. The image selection
screen will appear directly when the [Select & Transfer] or the
[Wallpaper] option was last selected.
2
Use the or button to select
or , and press the
button (or SET button).
3
Use the or button to select
images to download and press the
button (or SET button).
The images will download. The
button will blink blue while downloading is
in progress.
4
Press the MENU button.
The Direct Transfer menu will reappear.
125
Connecting the Camera to a Computer/TV
Connecting the Camera to the Computer to
Download Images without Installing Software
If you are using Windows XP or Mac OS X (v10.1/v10.2), you can use the
software distributed with these operating systems to download images
(JPEG format only) without installing the software bundled on the Canon
Digital Camera Solution Disk. This is useful for downloading images to a
computer in which the software is not installed.
However, please note that there are certain limitations to downloading with
this method. For more details, please refer to the supplied For Windows
®
XP
and Mac OS X Users leaflet.
1
Use the supplied interface cable to connect the computer's
USB port to the camera's DIGITAL terminal.
See steps 2-4 and onward on p.120.
2
Follow the onscreen instructions to proceed with
downloading.
126
Downloading Directly from a CF Card
1
Eject the CF card from the camera and insert it into a CF
card reader connected to the computer.
If you are using a PC card reader or a PC card slot, first place the CF
card into a PC card adapter (sold separately) and then insert the
loaded adapter into the slot.
Refer to your card adapter’s or card reader’s manual for information
regarding the connection between the computer and card adapter or
card reader.
2
Double-click the icon of the drive containing the CF card.
Depending on the operating system, the drive containing the CF card
may display automatically.
3
Copy the CF card’s images to the desired folder on the
hard disk.
The images are contained in the [xxxCANON] folder, which is a
subfolder of the [DCIM] folder on the CF card. The xxx represents a
number from 100 to 998 (p. 88).
PC Card Adapter
127
Connecting the Camera to a Computer/TV
Viewing Images on a TV set
Viewing Images on a TV set
You can use a video-compatible television as a monitor to shoot or play
back images when it is connected to the camera with the supplied AV Cable
AVC-DC300.
1
Press the ON/OFF button to turn the
camera off.
Also turn the television off.
2
Connect the AV cable to the
camera’s A/V Out terminal.
Slip your fingernail under the upper edge of
the terminal cover to open it and insert the
cable securely.
3
Plug the other ends of the AV cable
to the VIDEO IN and AUDIO IN jacks
on the TV.
4
Turn on the TV and switch it to
Video mode.
5
Slide the mode switch to
(Shooting) or (Playback).
Power Lamp
VIDEO
AUDIO
IN
Yellow
Black
128
A TV set cannot be used in (stitch assist).
No image will appear on the LCD monitor when the camera is
connected to a TV.
• If the TV is a stereo model, you can plug the audio plug into either
the left or right Audio In jack. Please refer to the TV’s manual for
details.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 50). The default setting
varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan, etc.
- PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If the video system is set incorrectly, the camera output may not
display properly.
6
Press the ON/OFF button.
The image will appear on the TV. Shoot or
play back images as usual.
If the images are not appearing on the TV
when shooting, press the DISP. button.
Power Lamp
129
My Camera Settings
Customizing the Camera (My Camera Settings)
My Camera allows you to customize the start-up image and start-up,
shutter, operation and self-timer sounds. Each menu item has three choices.
The option features science fiction related images and sounds. The
option features animals.
Changing My Camera Settings
1
Select the (My Camera) menu.
See Selecting Menus and Settings (p. 43).
2
Use the or button to select an
item.
3
Use the or button to select an
option.
Example: Start-up Image
130
• If you select (Theme) in Step 2, you can select a consistent
theme for each of the My Camera settings.
• If the [Mute] option in the (Set up) menu is set to [On], the beep
will not sound even if each sound item is individually set to ,
or (On) in the My Camera menu (p. 48).
4
Press the MENU button.
The menu will close.
In Shooting mode, the menu can be
closed by pressing the shutter button
halfway.
131
My Camera Settings
Registering My Camera Settings
Images recorded onto the CF card and newly recorded sounds can be added
as My Camera settings to the and menu items. You can also use the
supplied software to upload your computer’s images and sounds to the
camera.
Registering CF Card Images and Sounds
1
Slide the mode switch to
(Playback).
2
Select the (My Camera) menu.
See Selecting Menus and Settings (p. 43).
3
Use the or button to select an
item.
4
Use the or button to select
or .
The icon will display.
5
Press the DISP. button.
139
Troubleshooting
White dots appear
on the image
Light from the flash
has reflected off
dust particles or
insects in the air.
(This is especially
noticeable when
shooting at wide
angle)
This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
Flash does not fire Flash is set to off • Set the flash to on.
Image not showing
on TV monitor
Incorrect video
system setting
• Set the video system to the
appropriate setting, NTSC or PAL,
for your TV (p. 50).
Shooting in stitch
assist
• The output will not appear on a
TV in stitch assist. Cancel the
stitch assist.
Zoom does not work Zoom lever pressed
during movie
recording
• Adjust the zoom before shooting
a movie.
Reading images
from CF card is slow
CF card was
formatted in another
device
Use a
CF
card formatted in your
camera.
See Formatting CF Cards (p.
107).
Recording images to
CF card takes a long
time
Problem Cause Solution
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Digital IXUS 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Digital IXUS 500 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Digital IXUS 500

Canon Digital IXUS 500 User Manual - English - 164 pages

Canon Digital IXUS 500 User Manual - German - 164 pages

Canon Digital IXUS 500 User Manual - Dutch - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info