55722
123
Zoom out
Zoom in
Previous page
1/144
Next page
123
Trouble?
E
Recording/Editing
The disc cannot be ejected. Turn off the camcorder, disconnect the compact power
adapter and remove the battery pack. Restore the power
supply and try again.
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
The camcorder vibrates. Depending on the condition of the disc, the camcorder might
vibrate occasionally. This is not a malfunction.
The disc’s rotation can be
faintly heard.
The disc is activated from time to time. This is not a
malfunction.
Occasionally the operation
sound can be heard.
The disc is activated from time to time. This is not a
malfunction.
After using the camcorder for
a long time the lights up
in red.
This is not a malfunction. Turn the camcorder off and let it cool
for a while before resuming operation.
Problem Solution
” flashes red on the screen. The camcorder malfunctions. Consult a Canon Service
Center.
Image will not appear on the
screen.
Set the camcorder to . 31
Open the lens cover.
“SET THE TIME ZONE,
DATE AND TIME” appears on
the screen.
Set the time zone, date and time. 26
Recharge the built-in lithium battery and set the time zone,
date and time.
133
Pressing the start/stop button
will not start recording.
Set the camcorder to . 31
Load a disc. 29
The disc is full (“ END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
29
85
Disc is protected. Cancel the disc protection or replace the
disc.
88
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
Even after stopping recording,
the disc access indicator does
not go off.
The scene or still image is being recorded on the disc. 31
33
The point where the start/stop
button was pressed does not
match the beginning/end of
the recording.
There is a slight interval between pressing the start/stop
button and the actual beginning/end of the recording on the
disc. This is not a malfunction.
The recording suddenly stops
shortly after starting
recording.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth
or replace the disc.
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
Camcorder will not focus. Autofocus does not work on that subject. Focus manually. 50
Adjust the viewfinder with the dioptric adjustment lever. 22
Lens is dirty. Clean the lens. 136
Problem Solution
DC 20_10_PAL-E.book Page 123 Friday, September 2, 2005 6:36 PM
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon DC10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon DC10 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info