49901
118
Zoom out
Zoom in
Previous page
1/152
Next page
118
Cleaning the CMOS Imaging Element
5
Select [1: Enable].
Turn the 〈〉dial to select [1: Enable],
then press the 〈〉button.
The message “” appears on the
LCD panel.
If “”is blinking on the LCD panel, set
the Main Switch to OFFand remove the
battery pack. Then repeat the procedure
from Step1.
6
Press the shutter button down
fully.
The reflex mirror of the camera then flips
up, and the shutter opens.
7
Clean the imaging element.
Carefully blow any dust off the imaging
element using a commercially available
blower.
8
Finish cleaning.
Set the Main Switch to OFF.
The camera power turns off, the shutter
closes and the mirror is lowered.
Set the Main Switch to ON again, and the
camera will be ready to shoot pictures
normally.
Never disconnect the camera power during cleaning. If the power is cut off, the
shutter will close and possibly damage the shutter curtain.
Use a blower without a brush attached. Using a brush to remove dust from the
image element can damage the element.
Do not insert a dust blower into the camera beyond the lens mount. If the power
shuts off and the shutter closes, this may damage the shutter curtains.
Never use cleaning sprays or blower sprays. The pressure and freezing action
of the spray gas may damage the surface of the imaging element.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon D30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon D30 in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info