709431
16
Zoom out
Zoom in
Previous page
1/56
Next page
3 System Connections Preparations
16
Using the optional base plate secured with clamps (one of the following):
Clamps for 50 mm (2.0 in.) pipes (M10 bolts/nuts, 2 sets)
Clamps for 50 mm/60 mm (2.0 in./2.4 in.) pipes (M12 bolts/nuts, 2 sets)
Using the optional base plate secured with bolts:
M10 or M12 bolts/nuts (2 sets)
Safety (anti-drop) equipment (commercially available)
Eye bolt (M16 bolts, only when using the optional base plate)
Safety wire
Tools and Materials Required for Installation
Torque hex head wrenches: 2.5 mm (for M3 bolts), 4 mm (for M5 bolts), 6 mm (for M8 bolts)
Precision cross screwdriver #0
Cable ties and cutter/nipper
Fixing tools for any clamps/eye bolts used
To secure the base plate using bolts: fixing tools for the bolts used
Overview of the Installation Process
1. Open the package, unpack all the supplied parts and place the camera head on a stable work surface.
2. Remove the camera mounting bracket, IP controller and cable clamp from the camera head.
3. Prepare the camera unit and set up the main capture camera and lens.
Camera unitrefers collectively to the main capture camera with a lens and camera mounting bracket attached.
4. If using a rain cover, attach the front ring.
5. Attach the zoom unit to the camera head but tighten it only partially.
6. Mount the camera unit on the camera head.
7. Attach the gear ring to the lens and then fasten the zoom unit firmly.
8. Attach the IP controller to the camera head.
9. Attach the wide view camera and eyepiece camera to the camera head if necessary.
10. Connect all the necessary cables.
11. Turn on the system and check it is working correctly.
12. Attach the rain cover, if using one.
13. Attach the base plate.
14. Install the robotic camera system at the shooting location.
15. Check that the system is working correctly after the installation.
When transporting the camera head, always use two people to lift it, firmly grabbing the handles.
During the installation, use a table or other stable work surface and be careful not to drop any equipment.
Use the correct torque (A 49) when fastening bolts.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-S700R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-S700R in the language / languages: English as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info