709432
29
Zoom out
Zoom in
Previous page
1/37
Next page
5 Additional Information Troubleshooting
29
5 Additional Information
Troubleshooting
The IP controller does not start up.
When using the system with a camera head: Connect the camera head to the IP controllers HEAD terminal.
When using the system without a camera head: The (Ethernet) terminal may not be connected to the PoE hub
(A 11) or the PoE hub does not fulfill the standard or power requirements for use with this system (A 31).
Cannot turn off the IP controller.
Slide the power switch and hold it for more than 3 seconds. Once the power/status indicator starts flashing quickly
(4 times per second), release the power switch. This will force the IP controllers shutdown.
Cannot launch the web setup tool because the IP controllers IP address or password was forgotten.
Reset the IP controllers settings to their initial values using the power switch (A 30).
The login screen is not displayed.
The IP address used for the URL may be incorrect. Use the IP address that was set (A 15).
You may have added a “/” (forward slash) at the end of the URL. Delete the slash and try to log in again.
Check that the same IP address is not used for the IP controller and control PC.
With the camera head installed in underslung position, the camera pans in the wrong direction.
Activate the underslung mode on the IP controller (A 19).
The main capture camera is not working properly.
An unknown error may have occurred. Turn the main capture camera off and then on again. If using the system
with a camera head, you can also click [ ] (menu) > [Maintenance] > [Power Control] > [Camera] to turn the camera
off/on (A 28).
Communication with the main capture camera has stopped.
Disconnect the USB cable (type C) between the IP controller and main capture camera and then connect it again.
The wide view camera or eyepiece camera image is not displayed.
The image form these cameras cannot be checked using the web setup tool. Use the Camera Remote application.
The wide view camera or eyepiece camera is not working properly.
An unknown error may have occurred. . Click [ ] (menu) > [Maintenance] > [Power Control] > [Eyepiece camera]
or [Wide view camera] to turn the respective camera off and then on again (A 28).
The Ethernet 1000 Mbps link / 100 Mbps link indicator does not illuminate.
The IP controller is not correctly connected to a network. Disconnect the LAN cable and then connect it again.
The Ethernet 1000 Mbps link / 100 Mbps link indicator does not flash.
Data is not being transferred to the network. Using the web setup tool, check that a correct IP address was set
(A 15).
Images are not recorded.
A card was not inserted into the main capture camera or the card is full. Replace the card with one with sufficient
available space.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-G100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-G100 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info