709432
22
Zoom out
Zoom in
Previous page
1/37
Next page
4 Configuration Using Camera Head Preset Positions
22
Using Camera Head Preset Positions
You can register a set of pan, tilt, roll and zoom positions as a preset position in advance and easily move the camera
head to the preset position later on.
1 Preset position list
2 Move to preset position
3 Register as preset position
Registering a Preset Position
You can register up to 5 preset camera head positions (sets of pan, tilt, roll and zoom positions).
1. Adjust the camera head to the desired pan, tilt, roll and zoom positions.
2. Select a preset position from the pulldown menu and click [Set].
The current positions on all axes are saved as the selected preset position.
Moving the Camera Head to a Preset Position
1. Select a preset position from the pulldown menu and click [Go].
The camera head will move on all axes to the positions stored in the preset position file.
Checking the Operation of the Main Capture Camera
Launch the web setup tool on the control PC to check the systems operation and configure the necessary settings.
When using the Camera Remote application for a shooting session, launch also the Camera Remote application to check
its correct operation in advance.
When using the system without a camera head: Refer to Connection/Installation Checklist (A 32).
Checking the Image from Connected Cameras
The live view image from the main capture camera is shown in the live view display area and is refreshed once per
second.
The image from the wide view camera and eyepiece camera cannot be checked with the web setup tool.
Use the Windows default Camera app or other software to check the image from these cameras. If the
image from the eyepiece camera is unclear, you can adjust the main capture cameras viewfinders diopter
while checking the eyepiece cameras image on the Camera Remote application.
1
2
3
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-G100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-G100 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info