212741
68
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting 63
Scanned Images Are Not Correct
If the scanned images are not clear, if there are lines or spots on the images, or
if there is some other problem with scanned images, the likely causes are
listed below. Check each item and take the appropriate action.
Cause The sensor glass or the rollers inside the scanner are dirty.
Remedy Clean the sensor glass and rollers. (For instructions on cleaning
the sensor glass and rollers, see “Cleaning the Sensor Glass and
the Rollers,” on p. 48.)
Cause The scanner’s internal sensor glass is scratched.
Remedy Contact your local authorized Canon dealer or service
representative.
Cause The application software is not set up properly for
scanning.
Remedy Check the scanning settings of the scanning utility.
For example, if the scanned image is blank, the brightness setting
may be too high. If the resulting scanned images are too dark, the
brightness setting may be too low.
Cause The scanner driver or application software is not running
normally.
Remedy If the software is set properly for scanning and scanning is still
not possible, the scanner driver or the application software may
not be running normally. Reinstall the scanner driver or the
application software. (For details on how to install the scanner
driver, see “Installing the Scanning Utility,” on p. 17. For details
on how to install the application software, refer to the application
software instruction manual.)
Cause Attempting to use a function of the CR-25/55 that is not
supported by the application software.
Remedy Some application software may not support certain functions,
such as automatically detecting the paper size or changing the
scanning mode/resolution through the scan panel. Using such
application software for scanning may yield abnormal scanning
results. Try scanning without using functions such as automatic
paper size detection or margin settings.
If problems with the scanned images persist even after trying these solutions,
contact your local authorized Canon dealer, service representative, or the
*Canon Service Support Center.
* : For US customers only.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon cr 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon cr 55 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info