212803
20
Zoom out
Zoom in
Previous page
1/76
Next page
16
Chapter 2 Preparation Before Use
Setting Up the Scanner
Perform the following steps to set up the CR-180. Refer to the section for each
step for details about that step.
1. Check your operating environment (See “Checking Your Operating
Environment,” on p.17.)
d
2. Install the software (See “Installing the Software,” on p.19.)
Install the Scanning Utility provided with the CR-180.
d
3. Connect the scanner to a computer (See “Connecting the Scanner to a
Computer,” on p.23.)
You need to turn off the computer before connecting the CR-180 to it with a
SCSI cable.
d
4. Turn ON the power (See “Turning ON the Power,” on p.26.)
Turn on the CR-180 before turning on the computer if they are connected with
a SCSI cable.
d
5. Automatically installing the device driver (See p.27.)
The device driver is installed automatically when Windows recognizes the CR-
180.
To have the device drivers installed automatically when the computer recognizes the
CR-180, the software needs to be installed before the CR-180 is connected to the
computer.
If you connect the computer and turn on the CR-180 before installing the software,
the following wizard appears. If this happens, click [Cancel] to close the wizard’s
window, turn off the CR-180 and then install the software.
Important
Wizard Screen (Windows 2000)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon cr 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon cr 180 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info