709451

Canon CanoScan LiDE 80 Manual

16
Zoom out
Zoom in
Previous page
1/18
Next page
Scanning Film
16
11
Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPG format is recommended) and click [Save].
Post Film Scanning Procedures
1
Open the document cover, remove the Film Adapter Unit and replace its CAP.
2
Remove the film and the Film Guide from the document glass.
• You can purchase the following Accessory Kit for CanoScan LiDE80 if the Film Guide, Film
Adapter Unit or its CAP are lost or damaged.
Accessory Kit (A)(CSAK-LiDE80A) : Film Guide, CAP for Film Adapter Unit
Accessory Kit (B)(CSAK-LiDE80B) : Film Guide, Film Adapter Unit (with CAP)
Calibration Message
You must calibrate the scanner if the message to the
right appears. Use the following procedures to
calibrate it.
1. Open the document cover and remove the Film
Adapter Unit.
2. Remove the film from the Film Guide and position the Film Adapter Unit over the first frame
(closest to the scanner’s front) of the empty Film Guide on the document glass.
3. Gently close the document cover and click the [OK] button.
The calibration process will start and finish after approximately 1 minute.
4. Put the film back in the Film Guide once the calibration process is complete and place the
Film Adapter Unit back over the frame you wish to scan.
5. Click the [OK] button to display the preview image.
• If the scanner does not perform as described above, read the "Troubleshooting" section
of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the User’s
Guide (PDF format manual) for each software program on the CanoScan Setup Utility
CD-ROM.
• Always put the CAP back on the Film Adapter Unit when it is not in use.
• Film may be damaged if it is left on the document glass for extended periods of time.
… 16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CanoScan LiDE 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CanoScan LiDE 80 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info