Manual Canon canoscan LIDE 500 (page 16 of 22) (English)

500605

Zoom out

Zoom in

1/22

Scanning Film

This scanner can scan 35 mm film strip one frame at a time.

Preparing to Scan Film

Use the following procedures to place the film adapter unit and the film guide on the document glass to

scan film.

1 Attach the cable for the film adapter unit to the FAU

connector on the scanner's side panel.

2 Open the document cover and place the film guide

on the document glass of the scanner.

Fit the two tabs on the film guide into the document glass slots.

Calibration

Calibration is required when film is first scanned. Calibration is the

process ScanGear CS uses to adjust to the correct color balance. If there is film in the film guide, remove it

before setting the film adapter unit on it.

1 Remove the cap from the film adapter unit and

gently set the film adapter unit over the first

frame in the film guide.

Align the tab on the film adapter unit with the film guide.

• You cannot scan film with the scanner in the upright position.

• Clean the document glass before placing the film guide on it, otherwise dirt and dust

can affect image quality or damage the film.

• Use a blower brush to remove any dust from the film, which will affect the image

quality, and take care to hold the film by its edges to avoid transferring dirt or

fingerprints to it.

• When opening the document cover, support it

with your hand until it stops.

• Be careful not to lose the cap or to

allow dirt into it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon canoscan LIDE 500 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon canoscan LIDE 500 Manual

Product: