500618

Canon CanoScan FS 2700F Manual

48
Zoom out
Zoom in
Previous page
1/60
Next page
48
1. Troubleshooting Tips
If you think there is a problem with the Film Scanner, try to solve it by first referring to the table below.
If the problem is not addressed below or the recommended procedure fails to correct the problem, unplug the
Film Scanner and contact your Canon vendor or the nearest Canon Customer Support Help Desk listed at the
back of this guide.
SUGGESTION:
• Please refer to the Readme file or the on-screen HELP facility if you have a problem with the installa-
tion or operation of the driver software.
The Power Indicator Does Not Light.
Cause 1: The power cord is not attached.
Solution: Ensure that the power cord is properly attached. ( -> p. 32)
Cause 2: The power switch is in the Off position.
Solution: Turn the power switch to the On position. ( -> p. 44 )
Cause 3: The power voltage is too low.
Solution 1: Connect the power cord to a different power outlet. ( -> p. 10 )
Solution 2: Use a voltage regulator device that will provide a stable power supply.
Cause 4: The outlet is not receiving any electricity.
Solution: Check the fuse breaker box.
The Film Scanner is Not Detected.
Cause 1: The SCSI interface cable is disconnected.
Solution: Correctly connect the SCSI interface cable. ( -> p. 30 )
Cause 2: The SCSI interface cable is incorrectly connected.
Solution: Correctly connect the SCSI interface cable. (Check that you haven’t mistakenly connected the D-
Sub 25-Pin SCSI interface cable to your computer’s parallel port) ( -> p. 30)
Cause 3: The SCSI terminator is incorrectly set.
Solution: Install a terminator on the last SCSI device in the daisy chain or, if the Film Scanner is the last
device in the daisy chain, set the SCSI ID to a number in the Terminator On range.
( -> p. 29 )
Cause 4: The settings for the SCSI ID, IRQ or I/O port address are duplicated by another card or device.
Solution: Please read Step-1. ( -> p. 13 )
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CanoScan FS 2700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CanoScan FS 2700F in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info