500618
29
Zoom out
Zoom in
Previous page
1/60
Next page
29
2. Selecting SCSI ID and Terminator Settings
The last device in a daisy chain of SCSI devices attached to your computer must be fitted with a terminator or, if
it has the capability, must be set to the Terminator On range.
Your Film Scanner has a built-in terminator that can be set to either the On range or the Off range as required by
your device configuration.
CAUTION:
Your Film Scanner has been set at the factory to SCSI ID 2 on the Terminator On range. If you are
using your Film Scanner in the middle of a daisy chain configuration, always set the SCSI ID to an
appropriate number on the Terminator Off range.
Sample Configuration with the Film Scanner at the End of a Daisy Chain
If your Film Scanner is the last device in the daisy chain, set the SCSI ID to an unreserved number between 0 and
6 on the Terminator On range of the SCSI dial.
Sample Configuration with the Film Scanner Somewhere in the Midst of a Daisy Chain
If your Film Scanner is not the last device in the daisy chain, set the SCSI ID to an unreserved number between
0 and 6 on the Terminator OFF range of the SCSI dial.
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
Terminator On Range
SCSI Dial
Terminator Off Range
OFF
ON
6
(Factory Setting)
Terminator Off
Select a SCSI ID within
the Terminator On range.
OFF
ON
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
Terminator On
Select a SCSI ID
within the
Terminator Off
range.
OFF
ON
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CanoScan FS 2700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CanoScan FS 2700F in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info