500618
24
Zoom out
Zoom in
Previous page
1/60
Next page
24
SCSI Channel Interface Definitions
SCSI Parity Checking
This function enables or disables the SCSI parity check. The default setting is [Enabled]. Change this setting only
when the connected SCSI device does not support SCSI parity checking. This setting is unlikely to require chang-
ing because most SCSI devices support parity checking.
Host Adapter SCSI Termination
This function enables or disables SCSI termination on the SCSI host adapter card and of the SCSI cable. The
AVA-1502AP SCSI Host Adapter card only supports externally connected SCSI devices. Therefore, the default
setting, [Enabled], must remain unchanged.
Additional options
SCSI Device Configuration
Selecting this option displays the following items for each SCSI ID:
• Initiate Sync Negotiation
This setting toggles the synchronous data transfer function on and off to control the transfer of data between the
SCSI host adapter card and a SCSI device. The default setting is [Yes]. This should only be changed to [No] if a
SCSI device does not support synchronous data transfers.
• Maximum Sync Transfer Rate
This setting cannot be changed. The AVA-1502AP SCSI Host Adapter card supports a maximum synchronous
data transfer of 5.0 megabits per second.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CanoScan FS 2700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CanoScan FS 2700F in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info