500618
14
Zoom out
Zoom in
Previous page
1/60
Next page
14
1. Before You Start...
Here are some essential precautions for handling and installing the SCSI host adapter card supplied with your
Film Scanner.
Handling Precautions
CAUTION:
• SCSI host adapter cards are precision components that are sensitive to discharges of static electricity.
They must be handled delicately to avoid damage and malfunctions. Before touching a card, dis-
charge any static charges in your body by first touching something else that is grounded, such as a
metal surface on your computer case.
• Don’t remove the SCSI host adapter card from its protective wrapping until you are ready to install it. If
you must set the SCSI host adapter card down for a short period of time, place it on top of or inside the
protective wrapping.
• Never touch the terminals or circuitry on the SCSI host adapter card with your fingers. Hold the card by
its edges.
• Operating your computer with an improperly installed SCSI host adapter card can cause damage to
the card. Do not operate the computer until you have ensured that the card is installed strictly in
accordance with the instructions that follow.
• If the SCSI host adapter card does not operate correctly after following the proper installation proce-
dures, contact the retail outlet from which you purchased your Film Scanner.
About the Jumper Switches
Two jumper switches (J1 and J2) are installed on the SCSI host adapter card. Windows 95 users have no need to
change these switch settings.
CAUTION:
The J1 jumper switch is provided for computers lacking Plug and Play capabilities. The J1 jumper
switch enables the I/O port address setting to be changed. On the open setting (factory setting), the I/
O port address is [140]. The address for the closed setting is [340].
• Do not change the J2 jumper switch setting. The SCSI host adapter card will not function if this jumper
switch setting is altered. The factory setting is closed.
J2
J1
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CanoScan FS 2700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CanoScan FS 2700F in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info