500618

Canon CanoScan FS 2700F Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
9
2
10
11
1
7
8
9
5
6
4
3
IX240 Film Viewer
(1) Exposure Tab
After a film is processed, the exposure tab on the cartridge is
snapped downward. The winder will free wheel unless this tab
has been adequately depressed. If the winder is not rolling the
film, first check that the film has been processed and then further
depress this tab before attempting to use the winder.
(2) Film Cartridge Chamber
This the chamber that holds the IX240 film cartridge for viewing.
(3) Film Cartridge Chamber Lid
The lid is opened by matching the indicator marks on the viewer’s
underside and pushing the open lever in the direction of the
“open” mark. The lever will return to the closed position once the
chamber lid has been closed and will lock until the indicator marks
on the viewer’s underside are properly aligned and the film has
been completely rewound.
(4) Film Indicator
The film indicator will be red when the film cartridge is first inserted
or has been completely rewound, but will be blank when the film is
partially or fully extended around the rollers. As a safety feature,
the film cartridge chamber lid cannot be opened unless this
indicator is red, even when the indicator marks on the viewer’s
underside are properly aligned.
(5) Winder
Turn the winder counter-clockwise to unroll the film for viewing.
Turning it clockwise rewinds the film into the cartridge. The winder
will not operate with partially exposed film that is mistakenly
inserted into the film cartridge chamber.
(6) Crank
This crank is useful for quickly winding or rewinding film.
(7) Open Lever
This lever is for opening the lid of the IX240 film cartridge
chamber.
As a safety feature, the lever will not operate unless the indicator
marks on the viewer’s underside are properly aligned (using the )
and the film cartridge has been completely rewound (the film
indicator is red).
(8) Film Counter Window
The number of the picture frame appearing in the scanning
window will appear in this window.
(9) Scanning Window
The film appearing in this window will be scanned. Align the
desired picture frame within the scanning window in preparation
for scanning, using the crank to wind and rewind the film as
required.
(10) Indicator Marks
These marks must be properly aligned, using the winder, to allow
the film cartridge chamber lid to be opened.
(11) Insertion Arrow
Insert the film viewer into the Film Scanner in the direction
indicated by this arrow.
• The insertion arrow is not pre-labeled when
it arrives from the factory. You must stick
the label on yourself.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CanoScan FS 2700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CanoScan FS 2700F in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info