684393
150
Zoom out
Zoom in
Previous page
1/160
Next page
149
Self-Diagnostic Display
This section describes the messages that appear on the touch panel display and the method for resolving them. Follow the message that appears to
perform the required operation.
A message appears in the following cases:
When scanning or printing could not be performed due to a mistaken operation
When a user decision or operation is required during the scanning or printing operation
When a user decision or operation is required while accessing a network
A list of messages, causes, and remedies is indicated below.
Message Cause Remedy
Prepare a new waste toner container
and open the waste toner cover
behind the left part of the device.
Printing cannot be performed because the
waste toner container is full.
Replace the waste toner container. (See p. 73)
Preparing for color printing. Please
wait.
The machine is performing automatic
adjustment.
Please wait. When the adjustment is complete, colour
printing will automatically resume.
Place the original on the platen glass. A mode requiring an original to be placed on
the platen glass is set. There is no original on
the platen glass.
Place the original on the platen glass.
Remove the original from the platen
glass.
An original remains on the platen glass. Remove the original remaining on the platen glass, and
place the original again.
Original scanning area (thin glass
strip) is dirty.
The original scanning area (thin glass strip) is
dirty due to foreign material.
Clean the original scanning area of the feeder. (See p. 75)
Return the originals to their correct
order, then press the [Start] key.
Scanning stopped because an unspecied
problem occurred in the feeder.
Return the originals to their correct order. Place the
originals back into the feeder’s original supply tray, and
press .
Return the originals to their correct
order, then press the [Start] key. (The
data size of the scanned original
exceeded the limit. Settings will be
automatically corrected and the
originals will be scanned again.)
Scanning was cancelled because the data
size of the scanned originals exceeded the
maximum size that the machine can handle.
Scan the originals again from the rst page. If you still
cannot scan the originals, you may be able to resolve
the problem by decreasing the sharpness or setting the
original type to the Text mode.
The most proper size A4
is not
available.
The optimal paper size selected with
automatic paper selection is not loaded.
If this message appears even though the displayed paper
size is loaded, set [Paper Drawer Auto Selection On/O]
for the desired paper drawer to On’. (See e-Manual >
Settings/Registration.)
Load paper of the displayed size. If you press without
loading the paper, the paper loaded in the currently
selected paper drawer will be printed on.
Adjusting gradation. Wait a moment... The machine is performing automatic
adjustment.
Please wait. When the adjustment is complete, printing
will automatically resume.
Yellow toner is low. Replacement not
yet needed.
Toner of the displayed colour is running low.
Prepare a toner cartridge of the displayed colour. (See
p. 69)
Replace toner cartridge. (Magenta) Printing will soon not be possible because the
toner of the displayed colour is running out.
Replace the toner cartridge of the displayed colour. (See
p. 69)
Insert toner cartridge. (Cyan) The toner cartridge of the displayed colour is
not inserted correctly.
Insert the toner cartridge correctly.
(See p. 69)
For information on messages that are not included here, see e-Manual > Scan and Send, Sending/Receiving
a Fax, and Network.
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon C2025i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon C2025i in the language / languages: English as an attachment in your email.

The manual is 39,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon C2025i

Canon C2025i Installation Guide - English - 76 pages

Canon C2025i Quick start guide - English - 192 pages

Canon C2025i Installation Guide - German - 76 pages

Canon C2025i Quick start guide - German - 192 pages

Canon C2025i User Manual - German - 160 pages

Canon C2025i Installation Guide - Dutch - 76 pages

Canon C2025i Quick start guide - Dutch - 40 pages

Canon C2025i User Manual - Dutch - 160 pages

Canon C2025i Quick start guide - French, Italian, Spanish - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info