Page
2 -11 2.2.2 Printing range
2 -12 2.3 Interface Specifications
Part 3: OPERATING INSTRUCTIONS
3 - 1 1. PRINTER SETUP
3 - 1 1.1 Unpacking
3 - 2 1.2 Installation Location
3 - 3 1.3 Installation
3 - 3 1.3.1 Connecting the interface cable
3 - 3 1.3.2 Connecting the power supply
3 - 4 1.3.3 Installing the BJ cartridge
3 - 6 1.3.4 Replacing the ink tanks
3 - 7 1.3.5 Cartridge container [SB-60]
3 - 8 1.4 Turning Printer Power On and Off
3 - 8 1.4.1 Turning the power on
3 - 8 1.4.2 Turning the power off
3 - 9 1.5 Loading Printer Paper
3 -10 1.6 Names of Parts and Their Functions
3 -12 2. TRANSPORTING THE PRINTER
3 -12 2.1 Transporting the Printer
3 -13 2.2 Manual Capping
3 -14 3. PRINTER SERVICING FUNCTIONS
3 -14 3.1 Error Indications
3 -14 3.1.1 Operator call errors
3 -15 3.1.2 Service calls
3 -16 3.2 Warning Indications
3 -17 3.3 Function Settings
3 -17 3.3.1 Items set by control function
3 -18 3.3.2 Service mode of printer driver
3 -19 3.4 EEPROM
3 -19 3.5 Cleaning the BJ Cartridge
3 -20 3.6 Test Printout
3 -20 3.7 Pickup Roller Cleaning Function (HR-101)
3 -21 3.8 Service Mode
3 -22 3.8.1 Final factory test pattern
3 -22 3.8.2 Resetting EEPROM data
3 -23 3.8.3 Printing EEPROM data
3 -23 3.8.4 Setting destination country
3 -24 3.8.5 Other Function
Part 4: TECHNICAL REFERENCE
4 - 1 1. OVERVIEW
4 - 1 1.1 Printer Block Diagram
4 - 2 1.2 Initial Flowchart
4 - 3 1.3 Print Signal Sequence
4 - 4 1.4 BJ Cartridge Drive
4 - 4 1.4.1 Print drive control
4 - 5 1.5 Power-Off Sequence Flowchart
4 - 6 2. FIRMWARE
4 - 6 2.1 Interface
4 - 6 2.1.1 Compatible mode
4 - 7 2.1.2 Nibble mode
4 - 7 2.1.3 ECP mode
III
