804920
172
Zoom out
Zoom in
Previous page
1/220
Next page
172
PART 3
STEP 6. Installing the Handlebar And Stem
138690 Rev2 (10/22)
Assembling Your Bike
Cannondale Bicycle Owner’s Manual
Stem to fork steering tube set up:
Be sure that any fork protection spacer has been removed from the dropouts, the bottom parts
of the fork.
Take the bike out of the carton and place the fork dropouts on the floor. Keep the fork aiming
forward. Pivot the stem so that it faces directly forward.
Find the stem clamping bolts on the back of the stem. These are the bolts that hold the stem/
handlebar assembly in place on the steering tube of the fork. Tighten these bolts using a torque
wrench to the torque value marked on the stem. If no torque marking is present, tighten to 7Nm.
Method B, Stem is attached to the handlebars:
Remove the plastic fork protector from the bottom of the fork.
Set the bike on the floor. The rear wheel is already installed. As you set the fork on the floor be
sure that the fork is aimed forward. This will make it possible for the bike to balance on the floor.
Confirm that the fork is oriented forward. One way to check this is that the brake caliper will be
on the left side of the bike.
Now that the weight of the bike is pushing down on the fork remove the top cap. This is done by
un-threading the top cap bolt with a 5 mm allen wrench. Once loose, remove the top cap and
bolt as an assembly and set it nearby.
172


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Trail Neo 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Trail Neo 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Trail Neo 2020

Cannondale Trail Neo 2020 Additional guide - English - 24 pages

Cannondale Trail Neo 2020 User Manual - German - 102 pages

Cannondale Trail Neo 2020 Additional guide - German - 24 pages

Cannondale Trail Neo 2020 User Manual - Dutch - 102 pages

Cannondale Trail Neo 2020 Additional guide - Dutch - 24 pages

Cannondale Trail Neo 2020 User Manual - French - 102 pages

Cannondale Trail Neo 2020 Additional guide - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info