779945
201
Zoom out
Zoom in
Previous page
1/220
Next page
201
PART 3
For all disc brakes:
STEP 9. Front Brake
Cannondale Bicycle Owner’s Manual
Lift the front of the bike and spin the front wheel and apply the front brake very firmly. Hold the
front brake lever on very firmly with one hand, do not let go. With your other hand use a 5mm
allen wrench to tighten the two caliper mounting bolts. No final torque at this point, just tight.
Again, pick up the front of the bike and spin the front wheel. Do you see or hear dragging from
the front brake? Likely much less or no dragging.
If no drag, no noise, torque the two 5mm caliper mounting bolts to 7 Nm.
If there is some drag, some noise, again loosen the two caliper mounting bolts with the 5mm
allen wrench. Loosen just enough to be able to move the caliper with your hand. Pick up the front
of the bike and spin the front wheel. Apply the front brake very firmly. Hold the front brake lever
on very firmly with one hand, do not let go. With your other hand use the 5mm allen wrench to
tighten the two caliper mounting bolts. No final torque at this point, just tight. It is common for
this process to take two or more operations to properly adjust the brake.
See video instruction at: https://support.gtbicycles.com/hc/en-us/articles/1500008322681-
Dick-s-Sporting-Goods-Avalanche-Assembly
For all disc brakes:
Note that it may take anywhere from 20 to 40 complete stops to “break-in” your disk brakes. You
may notice an increase in braking power after the first ride. Do not touch the disc brake rotors
with your fingers or expose them to oils and lubricants. These contaminants will significantly
degrade braking performance. Best practice is to clean the surfaces of the disc brake rotor with
isopropyl alcohol.
WARNING
Do not touch or clean the rotor immediately after use, as the rotor may be very hot and could
burn you.
201


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Super 6 Evo - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Super 6 Evo - 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Super 6 Evo - 2020

Cannondale Super 6 Evo - 2020 Additional guide - English - 28 pages

Cannondale Super 6 Evo - 2020 Additional guide - German - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - Dutch - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - Dutch - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - French - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info