779950
12
Zoom out
Zoom in
Previous page
1/15
Next page
11
KP018/ - ceramic
KB6180/ - standard
39mm 34mm
BB30-73A
Asymmetric
73mm
(5mm)
Non-Drive Side Drive Side
34mm
BB30 - 68mm
34mm
BOTTOM BRACKET
The bottom bracket shell width is BB30-73A cranksets. See www.BB30standard.com.
SISL2 Crankset Installation
The following procedure should only be completed
by a professional bike mechanic.
For Loctite instructions: http://tds.loctite.com
1. Connect the SISL2 drive side crankarm to the spiderring.
Apply Loctite 242 to the crankarm spidering interface and
lockring. Tighten the lockring to 47Nm (34 FtLbs) using the
Cannondale special tool KT012/.
2. Apply grease to the drive side end of the 109mm SISL2
spindle and the crankarm spline hole. Also apply grease to
the fixing bolt threads and thin washer. Tighten the fixing
bolt with a 10mm Allen key to 40 Nm, (30 FtLbs).
3. Slide the 2.5mm drive side spacer marked “BB30 SISL2 DRIVE
SIDE SPACER” onto spindle followed by the SL2 bearing shield.
The markings on the shield face out.
4. Apply bearing grease to the spindle and slide drive side crank
arm/spindle into the non-drive side BB bearing. Use a rubber
mallet to tap the crankarm through until the spacer and shield
are seated against the drive side BB bearing.
5. On the non-drive side, slide the bearing shield onto the
spindle end. The markings on the shield face out.
6. Slide the wave washer and one 0.5mm shim onto the spindle.
7. Slide the non-drive side spacer onto the spindle, marking
facing out.
8. Apply bearing grease to the crankarm BB spline hole, spindle
end and the thin washer and fixing bolt threads. Tighten-non
drive the fixing bolt to 40 Nm, (30 FtLbs) and check to see
if wave washer is properly preloaded (still has slight wave
and not loose). If it is loose, remove the crankarm and add
another shim. Up to 3 shims can be used. Add shims as
needed.
9. When the preload is set and the non-drive side fixing bolt is
torqued, you are done.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Slice Multisport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Slice Multisport in the language / languages: English as an attachment in your email.

The manual is 2.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Slice Multisport

Cannondale Slice Multisport Additional guide - German - 15 pages

Cannondale Slice Multisport Additional guide - Dutch - 15 pages

Cannondale Slice Multisport Additional guide - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info