779950
9
Zoom out
Zoom in
Previous page
1/15
Next page
8
8
2
1
a
b
3
c
4
DI2 BATTERY INSTALLATION
1. Remove the BB components in order to install the seat post battery.
2. Attach the mounting plate (1) to the battery (2) with 3mm cable ties. Make sure the plate lip (b) tie heads (a) are positioned as shown.
3. Attach the battery wire, handlebar wire and the front and rear derailluer wires to the Di2 junction box (3). Insert the junction box and
wire leads into the downtube through the small window (c). Allow the battery wire to drop out through the bottom of the BB shell.
4. Attach the battery wire to the battery. Insert the battery up through the BB hole into the seat tube with the mount down. Apply a light
film of grease to the mounting bolt (4) threads and install the mounting bolts through the frame into the mounting plate inside the
seat tube. Tightened the bolts to secure the battery.
5. Insert the wires up into the frame openings so that the BB components can be installed without interference.
INSTALLATION DE LA BATTERIE DI2
1. Retirer les éléments du boitier de pédalier pour pouvoir installer la batterie interne
2. Attacher les plaques de montage (1) à la batterie (2) a l’aide de collier de 3mm. S’assurer que
l’épaulement de la plaque de montage et les têtes de colliers de serrage soient positionnes tels que
montrés sur le schéma.
3. Attacher le câble de la batterie, le câble provenant du cintre et le câble connecté au dérailleur arrière au
boitier de connexion Di2. Insérer le boitier de connexion et ses câbles dans le tube diagonal via le trou de
passage (c). Faire en sorte que le fil de la batterie ressorte au niveau de la boite de pédalier.
4. Attacher le fil de la batterie à la batterie. Insérer la batterie à travers le trou de la boite de pédalier
(plaque de montage vers la bas). Appliquer une légère couche de graisse sur les filets des vis de montage
(4) et mettre en place les vis dans la plaque de maintien de la batterie dans le tube de selle en passant a
travers les trous du cadre. Serrer les vis jusqu’au maintien de la batterie.
5. Placer les câbles dans les ouvertures du cadre de façon à ce que les éléments du boitier de pédalier et du
pédalier puissent être installes sans interférence
FR
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Slice Multisport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Slice Multisport in the language / languages: French as an attachment in your email.

The manual is 2.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Slice Multisport

Cannondale Slice Multisport Additional guide - English - 15 pages

Cannondale Slice Multisport Additional guide - German - 15 pages

Cannondale Slice Multisport Additional guide - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info