779949
15
Zoom out
Zoom in
Previous page
1/21
Next page
14
si compression assembly
The cylindrical shape of the TOP CAP ts snugly within the carbon steering tube inside diameter
(I.D.), supporting the steerer from the clamping force of the stem. It must t snugly inside the
I.D. of the steerer.
How to install the assembly
1. Assemble the fork, headset, spacers, and stem. Make sure that the stem bolts are loose.
2. Set up the compression assembly. “READY TO INSERT above. The length should be about
48mm as shown above. You can do this by unthreading the top cap from the expander and
then threading it back on about 6-7 turns. The expanding parts should not be expanded.
3. Insert the SI compression assembly into the fork steerer. It should slide in snugly; the TOP
CAP closely tting the steerer inside diameter.
4. Insert a 5mm Allen key through the access hole in the TOP CAP and into the EXPANDER BOLT.
Tighten the expander by turning clockwise to 6.8Nm, 5 ftLbs.
5. To set bearing preload, insert a 6mm allen key into the hex shape in the TOP CAP iteself.
Turn the entire TOP CAP clockwise to increase preload. Turn counter-clockwise to decrease
preload.
6. When the headset preload is correct, align handlebar and tighten the stem fork clamp bolts
to the torque specied for the stem. Consult the stem since torque values are often marked
on the stem, or consult the manufacturer’s instructions.
WARNINGS
USE ONLY ORIGINAL EQUIPMENT CANNONDALE SI COMPRESSION ASSEMBLY. Do not
replace it with a star nut or use any other compression or expanding wedge assembly.
DO NOT INSTALL HEADSET SPACERS ON TOP OF THE STEM. Installing spacers above the
stem will raise the TOP CAP inside the steerer removing necessary support for the steerer
tube wall. When stem bolts are tightened. the steerer tube can be damaged.
PLACE HEADSET SPACERS ONLY BETWEEN THE HEADTUBE AND THE BOTTOM OF THE
STEM.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IF YOUR IGNORE THESE
WARNINGS.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Slice Aero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Slice Aero in the language / languages: English as an attachment in your email.

The manual is 3.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Slice Aero

Cannondale Slice Aero Additional guide - German - 20 pages

Cannondale Slice Aero Additional guide - Dutch - 20 pages

Cannondale Slice Aero Additional guide - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info