779949

Cannondale Slice Aero Manual

9
Zoom out
Zoom in
Previous page
1/21
Next page
120849.PDF
9
80mm Minimum Insert
The minimum insert depth that the seat post must be inserted into the frame is 80mm. Seat
posts are permanently marked with ‘MINIMUM INSERT” line 80mm up from the bottom of an
un-cut seat post.
Cutting the Seat Post
In some frames (especially smaller sizes), a seat post will only be able to be inserted into a seat tube
to a maximum depth of 100 mm. Below a depth of 100mm carbon material can interfere with the
seat post. The material can not be removed.
The full length of the seat post can be cut down to have sucient adjustment range. The minimum
insertion depth requirement of 80mm does not change. 80mm should be marked from the bottom
of a cut seat post. The seat post may be cut (shortened). A new “MINIMUM INSERT” line 80mm
from the bottom of the post must be marked or indicated without scoring, scratching or
otherwise damaging the surface of the seat post. Use a thin decal (automotive pin striping) or
permanent marker.
WARNINGS
TO AVOID SERIOUS SEAT POST OR FRAME DAMAGE:
1. After any crash, fall, or impact, remove and inspect the seat post for damage (e.g., cracks,
scratches, scrapes, gouges, splintering). If damage is found, do not ride it; discard it.
Replace the seat post with a new one.
2. Do not use solvents, or chemical spray cleaners to clean.
3. Never force a seat post into the seat tube.
4. Use a good torque wrench to tighten fasteners to the specied torque. Correct tightening
torque of the seat post clamp and the bolts that hold the saddle to the seat post is also
very important to your safety. Always tighten seat post to saddle clamp bolts to the correct
torque. Bolts that are too tight can stretch and deform. Bolts that are too loose can move,
fatigue and fracture. Either mistake can lead to a sudden failure of these bolts. Such a
failure may lead to an accident, with risk of serious injury, paralysis or death.
5. If the seat post requires cutting, have it done by a professional bike mechanic with
experience cutting high-performance carbon components.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IF YOUR IGNORE THESE
WARNINGS.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Slice Aero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Slice Aero in the language / languages: English as an attachment in your email.

The manual is 3.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Slice Aero

Cannondale Slice Aero Additional guide - German - 20 pages

Cannondale Slice Aero Additional guide - Dutch - 20 pages

Cannondale Slice Aero Additional guide - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info