804898
197
Zoom out
Zoom in
Previous page
1/220
Next page
197
PART 3
DISC - Mechanical
STEP 9. Front Brake
Cannondale Bicycle Owner’s Manual
DISC - Mechanical
Cable Operated Disc Brakes:
Route the front brake cable and housing assembly from the left-hand brake lever down to the
front brake caliper.
Thread the cable into the fitting on the front brake caliper, and then seat the end of the housing
into the fitting on the front brake caliper. See photos on page ____ re proper seating of housings.
Find any cable housing fitting on the fork and secure the cable housing. This may be a small
treaded fitting, such as a clamp with a 3mm screw, or a cable tie/zip tie. Securing the cable
housing properly is an important safety step to keep it from interfering with the front wheel.
Now thread the cable into the cable anchor bolt fitting on the front brake caliper. You may need
to open this fitting with a 5mm allen wrench.
Be sure that the brake arm is at it lowermost, retracted position. Note downward angle of brake
arm in above drawing. Note significant gap between the brake arm and the caliper body, which
allows the arm to move and the brakes to work. Keep the cable snug and confirm that the cable
is captured by the cable anchor bolt fitting. Tighten this bolt with a 5mm allen wrench to 7 Nm.
The front brake cable provided is intentionally longer that it needs to be. After you have clamped
the cable with the cable anchor bolt you will need to cut the cable. Cut the cable about 1 ½ “
below this bolt.
197


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Moterra Neo 2021 - Shimano E7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Moterra Neo 2021 - Shimano E7000 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Moterra Neo 2021 - Shimano E7000

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - English - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - English - 30 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - German - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - German - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - German - 30 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - Dutch - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - Dutch - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - French - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - French - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info