804899
41
Zoom out
Zoom in
Previous page
1/220
Next page
41
PART 1
3. Removing And Installing Wheels
Section 4. Tech
Cannondale Bicycle Owner’s Manual
(5) Lift the rear wheel o the ground a few
inches and remove it from the rear
dropouts.
d. Installing a disk brake or rim
brake rear wheel
CAUTION
If your bike is equipped with a rear disk
brake, be careful not to damage the disk,
caliper or brake pads when re-inserting the
disk into the caliper. Never activate a disk
brake’s control lever unless the disk is
correctly inserted in the caliper.
(1) With a cam action system, move the cam
lever to the OPEN position (see fig. 8 a &
b). The lever should be on the side of the
wheel opposite the derailleur and
freewheel sprockets.
(2) On a derailleur bike, make sure that the
rear derailleur is still in its outermost,
high gear, position; then pull the
derailleur body back with your right hand.
Put the chain on top of the smallest
freewheel sprocket.
(3) On single-speed, remove the chain from
the front sprocket, so that you have
plenty of slack in the chain. Put the chain
on the rear wheel sprocket.
(4) Then, insert the wheel into the frame
dropouts and pull it all the way in to the
dropouts.
(5) On a single speed or an internal gear hub,
replace the chain on the chainring; pull
the wheel back in the dropouts so that it
is straight in the frame and the chain has
about 1/4 inches of up-and-down play.
(6) With a cam action system, move the cam
lever upwards and swing it into the
CLOSED position (fig. 8 a & b). The lever
should now be parallel to the seat stay or
chain stay and curved toward the wheel.
To apply enough clamping force, you
should have to wrap your fingers around
the seat stay or chainstay for leverage,
and the lever should leave a clear imprint
in the palm of your hand.
(7) With a through-bolt or bolt-on system,
tighten the fasteners to the torque
specifications in PART II “Tightening
Torques” or the hub manufacturer’s
instructions.
NOTE: If, on a traditional cam action system,
the lever cannot be pushed all the way to a
position parallel to the seat stay or chain
stay, return the lever to the OPEN position.
Then turn the tension adjusting nut
counterclockwise one-quarter turn and try
tightening the lever again.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Moterra 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Moterra 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Moterra 2020

Cannondale Moterra 2020 Additional guide - English - 24 pages

Cannondale Moterra 2020 Additional guide - English - 32 pages

Cannondale Moterra 2020 Additional guide - German - 30 pages

Cannondale Moterra 2020 User Manual - German - 102 pages

Cannondale Moterra 2020 Additional guide - German - 24 pages

Cannondale Moterra 2020 Additional guide - Dutch - 30 pages

Cannondale Moterra 2020 User Manual - Dutch - 102 pages

Cannondale Moterra 2020 Additional guide - Dutch - 24 pages

Cannondale Moterra 2020 Additional guide - French - 30 pages

Cannondale Moterra 2020 User Manual - French - 102 pages

Cannondale Moterra 2020 Additional guide - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info