804903
207
Zoom out
Zoom in
Previous page
1/220
Next page
207
PART 3
Installation
10. Install Pedals
Cannondale Bicycle Owner’s Manual
Installation
If there are washers secured to the crank arm or shipped with the pedals, install one washer
on each pedal axle prior to installation.
Smear grease on each of the pedal threads. This is important to prevent corrosion.
Standing on the left side of the bike (the side without the chain), take the threaded end of
pedal marked “L” and align with threaded hole in crank arm and turn the wrench flats
carefully, by hand, in a counter-clockwise direction (toward the front).
Tighten securely with a pedal wrench or 15mm open end wrench. Make them very tight.
Stand on the right side of the bike (side with the chain) take the threaded end of the pedal
marked “R” and align with threaded hole in crank arm and turn the wrench flats carefully, by
hand, in a turn clockwise (toward the front).
Tighten securely with a pedal wrench or 15mm open end wrench. Make them very tight.
Pro Tip: We urge you to borrow or buy a proper pedal wrench. These wrenches are narrow to fit
the narrow wrench flats on the pedal axles. These wrenches are long, to provide leverage to
tighten and remove pedals.
WARNING
Don’t ride you bike without securely tightening both pedals.
207


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Mavaro Neo 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Mavaro Neo 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Mavaro Neo 2020

Cannondale Mavaro Neo 2020 Additional guide - English - 24 pages

Cannondale Mavaro Neo 2020 Additional guide - English - 34 pages

Cannondale Mavaro Neo 2020 User Manual - German - 102 pages

Cannondale Mavaro Neo 2020 Additional guide - German - 24 pages

Cannondale Mavaro Neo 2020 Additional guide - German - 34 pages

Cannondale Mavaro Neo 2020 User Manual - Dutch - 102 pages

Cannondale Mavaro Neo 2020 Additional guide - Dutch - 24 pages

Cannondale Mavaro Neo 2020 Additional guide - Dutch - 34 pages

Cannondale Mavaro Neo 2020 User Manual - French - 102 pages

Cannondale Mavaro Neo 2020 Additional guide - French - 24 pages

Cannondale Mavaro Neo 2020 Additional guide - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info