804900
20
Zoom out
Zoom in
Previous page
1/32
Next page
18
137373 Rev 1.
EnglishHabit Neo / Moterra - Owner’s Manual Supplement
LockR
Be sure to support the bike or swingarm to prevent personal injury or bike damage when
removing/disconnecting linkages of an axle.
To remove the LockR from the frame:
1. Loosen the screw 46 turns using a T25 Torx key.
2. Tap head of screw with a rubber mallet to un-seat the wedge bolt located on the opposite side.
3. Remove the screw and wedge bolt from the still installed axle.
4. If the wedge did not come out with the screw, insert a 5 mm hex key and turn to free and
remove it. If wedge still sticks insert a wooden or plastic dowel into the drive side and drive it
out.
5. To remove the axle itself, on non-drive side, insert a 6 mm hex key into the axle on the
non-drive side and and turn counter-clockwise until it can be removed.
To install the LockR from the frame:
1. Disassemble and clean all parts of the LockR axle. Do not install it assembled.
Inspect the parts for damage (burrs, scratches, deformity, wear). Replace the entire LockR
assembly if any damage is found.
2. Apply a light coating of a high-quality bicycle bearing grease to all parts.
3. Align the linkage and bearing and insert the threaded end of the pivot axle (1) into the
non-drive side.
4. Tighten the inserted pivot axle to 1 Nm using a 6 mm hex key fitted torque wrench from the
non-drive side.
NOTICE
Use a calibrated torque wrench. Exceeding 1 N·m will result in permanent damage to the
LockR pivot system.
5. Insert the wedge bolt (2) into the drive side of the axle and insert the small end of the wedge
(3) into the non-drive side axle head.
6. Thread the screw (4) into wedge bolt with a wrench and tighten to 5.0 Nm.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Habit Neo 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Habit Neo 2020 in the language / languages: English as an attachment in your email.

The manual is 12.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Habit Neo 2020

Cannondale Habit Neo 2020 Additional guide - English - 24 pages

Cannondale Habit Neo 2020 User Manual - English - 220 pages

Cannondale Habit Neo 2020 Additional guide - German - 24 pages

Cannondale Habit Neo 2020 User Manual - German - 102 pages

Cannondale Habit Neo 2020 Additional guide - German - 30 pages

Cannondale Habit Neo 2020 Additional guide - Dutch - 24 pages

Cannondale Habit Neo 2020 User Manual - Dutch - 102 pages

Cannondale Habit Neo 2020 Additional guide - Dutch - 30 pages

Cannondale Habit Neo 2020 Additional guide - French - 24 pages

Cannondale Habit Neo 2020 User Manual - French - 102 pages

Cannondale Habit Neo 2020 Additional guide - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info