804906

Cannondale ebikeMotion - APP Manual

16
Zoom out
Zoom in
Previous page
1/76
Next page
If your bicycle is not an eBike, remember that YOU ALSO
COULD BE ABLE TO USE THE APP IN CONVENTIONAL
BICYCLES. Only the eBike features will not operate, but the
APP will adapts automatically for the use in your
conventional bicycle (APP will use GPS speed, etc.). you will
have to download maps getting a subscription if you want to
use the Navigation and Map features.
If your bicycle is compatible with ebikemotion® Platform for
eBikes, that means that you have one eBike make with our
components you will get extra information of your eBike in
the APP.
Remember that to start to operate your eBike you will need
to check that:
- You have sufficiently charged Battery Pack
inserted or connected to your eBike. For further information
about that check the Battery Pack instructions of the
manufacturer of your eBike.
- The iWoc® Remote wire is properly connected to
the eBike Display bus connection.
- The electronic components of your eBike need to
be compatible by Bluetooth® protocol with ebikemotion®
APP.
4.2 eBike Requirements
Page 16
4. Main Operation of Bicycles
4.1 Conventional bicycle Requirements
IMPORTANT
Use a good holder to put your smartphone safely in
your handlebar. ebikemotion Technology is involved
into create the best holder portfolio for the safety
integration of your smartphone in your bicycle. It is
responsability of you to keep safety your phone.
If you have a conventional bicycle you will be able to
user all the features of the APP that do not show eBike
information. Install and enjoy, it IS FREE.
Example of Mount by QUAD LOCK®
CONVENTIONAL BICYCLES
Push Assistance Motor power ON/OFF
Tto switch OFF your eBike system long press button “C”. You
will see that the RGB LED lights green, blue, red and finally
white to switch off. All LED lights of the remote will switch off
and the eBike system will be OFF.
To switch ON your eBike system short press (press once) on
button “C”. You will see that the LED lights on the iWoc®
initiate a sequence while checking the system, and will then
show the status:
Once the eBike is switched ON you can control the power
assist level of the system to push assistance or not. To control
that use the buttons [A] and [B] to increase or decrease the
power of the drive. Each time that you change the power
assist you can modify the power or modify the assistance
motor map depending of the motor controller integration
and performance of the eBike System.
Increase power assist will be represented in the LED power
assist panel with 1, 2 or 3 LED lights ON. IF power assist LED
lights are OFF it means that motor will now push. If LED lights
are blinking it means that you are running in one special
map, by example CUSTOM MAP with special configuration.
eBike Switching OFF
eBike Switching ON
C
C
E
D
3
1
B
CA
2
iWoc® STANDARD Remote, Main Components
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale ebikeMotion - APP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale ebikeMotion - APP in the language / languages: English as an attachment in your email.

The manual is 18.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info